ODSLANBlazer7000-MIB :: lanBlazer70003ComMappingTableStatus

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › ODSLANBlazer7000-MIB › lanBlazer70003ComMappingTableStatus

lanBlazer70003ComMappingTableStatus

Module: ODSLANBlazer7000-MIB

OID (symbolic): ODSLANBlazer7000-MIB::lanBlazer70003ComMappingTableStatus

OID (numeric): 1.3.6.1.4.1.50.8.1.2.1.7.3.1.1.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The status of an entry to be created. When adding an entry all fields will be set, and then the status is set to createRequest(1), indicating that the entry is to be created. If the creation is successful, then the status will be set to active(3). Otherwise if the creation was not successful then one of the following error codes will be set and the entry will not be created: entryExistsError(4) - An entry already exists. otherError(5) - An error other than the others defined.

What is lanBlazer70003ComMappingTableStatus?

Drives this 3Com mapping table's create lifecycle via SNMP SET: an admin populates the table's fields and writes createRequest(1), which becomes active(3) on success, or returns entryExistsError(4) if a table with that index already exists, or otherError(5) for any other failure. This is the standard row-creation handshake used to provision a new custom VLAN mapping table.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.50.8.1.2.1.7.3.1.1.1.3
snmpwalk -v2c -c public <target> ODSLANBlazer7000-MIB::lanBlazer70003ComMappingTableStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.50.8.1.2.1.7.3.1.1.1.3.1
snmpget -v2c -c public <target> ODSLANBlazer7000-MIB::lanBlazer70003ComMappingTableStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.50.8.1.2.1.7.3.1.1.1.3.1 i <value>

Start monitoring ODS LANBlazer 7000 WAN test/analysis instrument with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ODSLANBlazer7000-MIB::lanBlazer70003ComMappingTableStatus OID value, configure state conditions and alerts, and monitor any ODS LANBlazer 7000 WAN test/analysis instrument from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.50odsODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8odsTPSODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1odsLANBlazerODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2odsLANBlazerMibsODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1odsLANBlazer7000MibODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.7lanBlazer7000VlanMgtODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.7.3lanBlazer7000VlanMappingsODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.7.3.1lanBlazer70003ComMappingODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.7.3.1.1lanBlazer70003ComMappingTableODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.7.3.1.1.1lanBlazer70003ComMappingEntryODSLANBlazer7000-MIB
1.3.6.1.4.1.50.8.1.2.1.7.3.1.1.1.3lanBlazer70003ComMappingTableStatusODSLANBlazer7000-MIB