All MIBs › OCTOPUSE-MIB › octoCdrTftpClientTimer
octoCdrTftpClientTimer
Module: OCTOPUSE-MIB
OID (symbolic): OCTOPUSE-MIB::octoCdrTftpClientTimer
OID (numeric): 1.3.6.1.4.1.231.7.2.9.5.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: cycle time in minutes for initiating CDR output, max value 1439 minutes (23hours,59minutes) (only relevant for TFTP client mode)
What is octoCdrTftpClientTimer?
Sets the cycle time, in minutes (up to 1439, i.e. 23h59m), at which the device initiates CDR output; only relevant in TFTP client mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.231.7.2.9.5.7 snmpwalk -v2c -c public <target> OCTOPUSE-MIB::octoCdrTftpClientTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.231.7.2.9.5.7.1 snmpget -v2c -c public <target> OCTOPUSE-MIB::octoCdrTftpClientTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.231.7.2.9.5.7.1 i <value>
Start monitoring Siemens Octopus E LAN 10/20/30 PABX (HiPath AllServe family) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the OCTOPUSE-MIB::octoCdrTftpClientTimer OID value, configure state conditions and alerts, and monitor any Siemens Octopus E LAN 10/20/30 PABX (HiPath AllServe family) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.231 | sni | AN-MIB |
| 1.3.6.1.4.1.231.7 | siemensUnits | AN-MIB |
| 1.3.6.1.4.1.231.7.2 | pn | H150E-MIB |
| 1.3.6.1.4.1.231.7.2.9 | h150eOffice | H150E-MIB |
| 1.3.6.1.4.1.231.7.2.9.5 | h150eCdrConfigGroup | H150E-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.231.7.2.9.5.7 | octoCdrTftpClientTimer | OCTOPUSE-MIB |