OA-QOS-MIB

All MIBs › OA-QOS-MIB

Organization: OneAccess

Last Updated: 2003-01-20

Category: QoS and Policy

Description: Manages QoS policy queuing, traffic shaping, and class-map configuration on OneAccess CPE router platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is OA-QOS-MIB?

This is a vendor-specific MIB from OneAccess (OA) for its family of enterprise CPE routers, covering Quality of Service policy management including traffic shaping, class-of-service queuing, and policy-map application to interfaces. It exposes tables mapping QoS service policies to interfaces, recording policy direction (inbound/outbound) and interface type, plus a table of generic QoS policy objects/class definitions. Its monitoring value is primarily configuration and traffic-shaping status: administrators use it to confirm which QoS policy is applied to which interface and in which direction, verifying that traffic prioritization and shaping are active as intended on the router's software-level packet-forwarding path. It depends on the standard IF-MIB ifIndex convention for identifying the interfaces to which policies are applied. It is deployed on OneAccess CPE routers at enterprise or service-provider edge sites where per-interface QoS policies enforce bandwidth guarantees or prioritize latency-sensitive traffic. Engineers can download the OA-QOS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in OA-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

OneAccess CPE router

Monitoring Examples

An administrator checks oacQosInterfacePolicyTable, keyed by oacQosInterfacePolicyIndex and oacQosIfIndex, to confirm which oacQosPolicyIndex is bound to a WAN interface and in which oacQosPolicyDirection (inbound or outbound). Cross-referencing oacQosServicePolicyTable reveals the policy's oacQosIfType and full definition, while oacQosObjectsTable lists the class/object components making up that policy. If VoIP traffic is being delayed on a link, finding no active policy bound to that interface's oacQosIfIndex would explain the missing prioritization.

What Can Be Monitored

QoS policy-to-interface binding
policy direction (in/out)
interface type under QoS
QoS class/object definitions

Imported Objects

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From ONEACCESS-GLOBAL-REG

oacExpIMIp

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using oacQosClassMapPreExecutePkt OID:

Select an OneAccess CPE router (QoS traffic shaping/class-of-service policy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type oacQosClassMapPreExecutePkt into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the count of inbound packets before executing any policy. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
oacQOS	1.3.6.1.4.1.13191.10.3.1.3
oacQosClassMapConfigEntry	1.3.6.1.4.1.13191.10.3.1.3.5.1		not-accessible
oacQosClassMapConfigTable	1.3.6.1.4.1.13191.10.3.1.3.5		not-accessible	This Table specifies the classmaps configuration.
G32 oacQosClassMapDropBitRate	1.3.6.1.4.1.13191.10.3.1.3.6.1.13	Gauge32	read-only	Rate of dropped bits.
C32 oacQosClassMapDropByte	1.3.6.1.4.1.13191.10.3.1.3.6.1.11	Counter32	read-only	Count of dropped bytes.
C64 oacQosClassMapDropByte64	1.3.6.1.4.1.13191.10.3.1.3.6.1.12	Counter64	read-only	Count64 of dropped bytes.
C32 oacQosClassMapDropPkt	1.3.6.1.4.1.13191.10.3.1.3.6.1.9	Counter32	read-only	Count of dropped packets.
C64 oacQosClassMapDropPkt64	1.3.6.1.4.1.13191.10.3.1.3.6.1.10	Counter64	read-only	Count64 of dropped packets.
QOS oacQosClassMapInfo	1.3.6.1.4.1.13191.10.3.1.3.5.1.2	QosClassInfo	read-only	Type of classmap: Match all or Match any.
STR oacQosClassMapName	1.3.6.1.4.1.13191.10.3.1.3.5.1.1	DisplayString	read-only	Name of class map.
G32 oacQosClassMapPostExecuteBitRate	1.3.6.1.4.1.13191.10.3.1.3.6.1.8	Gauge32	read-only	Rate of outbound bits after applying policy.
C32 oacQosClassMapPostExecuteByte	1.3.6.1.4.1.13191.10.3.1.3.6.1.6	Counter32	read-only	Count of outbound bytes after applying policy.
C64 oacQosClassMapPostExecuteByte64	1.3.6.1.4.1.13191.10.3.1.3.6.1.7	Counter64	read-only	Count64 of outbound bytes after applying policy.
G32 oacQosClassMapPreExecuteBitRate	1.3.6.1.4.1.13191.10.3.1.3.6.1.5	Gauge32	read-only	Bit rate of data before executing any policy.
C32 oacQosClassMapPreExecuteByte	1.3.6.1.4.1.13191.10.3.1.3.6.1.3	Counter32	read-only	Count of inbound bytes before executing any policy.
C64 oacQosClassMapPreExecuteByte64	1.3.6.1.4.1.13191.10.3.1.3.6.1.4	Counter64	read-only
C32 oacQosClassMapPreExecutePktEx	1.3.6.1.4.1.13191.10.3.1.3.6.1.1	Counter32	read-only	Count of inbound packets before executing any policy.
C64 oacQosClassMapPreExecutePkt64	1.3.6.1.4.1.13191.10.3.1.3.6.1.2	Counter64	read-only	Count64 of inbound packets before executing any policy.
C32 oacQosClassMapRemarkedByte	1.3.6.1.4.1.13191.10.3.1.3.6.1.16	Counter32	read-only	Count of remarked bytes.
C64 oacQosClassMapRemarkedByte64	1.3.6.1.4.1.13191.10.3.1.3.6.1.17	Counter64	read-only	Count of remarked bytes.
C32 oacQosClassMapRemarkedPkt	1.3.6.1.4.1.13191.10.3.1.3.6.1.14	Counter32	read-only	Count of remarked packets.
C64 oacQosClassMapRemarkedPkt64	1.3.6.1.4.1.13191.10.3.1.3.6.1.15	Counter64	read-only	Count64 of remarked packets.
oacQosClassMapStatsEntry	1.3.6.1.4.1.13191.10.3.1.3.6.1		not-accessible
oacQosClassMapStatsTable	1.3.6.1.4.1.13191.10.3.1.3.6		not-accessible	Statistics for classmaps.
G32 oacQosConfigIndex	1.3.6.1.4.1.13191.10.3.1.3.3.1.2	Gauge32	read-only	The index of the config. A config can be shared by several objects.
NUM oacQosIfIndex	1.3.6.1.4.1.13191.10.3.1.3.1.1.2	InterfaceIndex	read-only	The interface index.
NUM oacQosIfType	1.3.6.1.4.1.13191.10.3.1.3.1.1.3	InterfaceType	read-only	Interface type.
oacQosInterfacePolicyEntry	1.3.6.1.4.1.13191.10.3.1.3.2.1		not-accessible	Each entry is indexed by ifindex and direction.
G32 oacQosInterfacePolicyIndex	1.3.6.1.4.1.13191.10.3.1.3.2.1.1	Gauge32	read-only	Index for policy, identical with oacQosPolicyIndex.
oacQosInterfacePolicyTable	1.3.6.1.4.1.13191.10.3.1.3.2		not-accessible	This describes the service policies attached to the interfaces.
oacQosMatchConfigEntry	1.3.6.1.4.1.13191.10.3.1.3.7.1		not-accessible
oacQosMatchConfigTable	1.3.6.1.4.1.13191.10.3.1.3.7		not-accessible	This table specifies the match statements configuration.
QOS oacQosMatchInfo	1.3.6.1.4.1.13191.10.3.1.3.7.1.2	QosMatchInfo	read-only	Match or Match not.
STR oacQosMatchName	1.3.6.1.4.1.13191.10.3.1.3.7.1.1	DisplayString	read-only	The name of the match statement.
G32 oacQosMatchPreExecuteBitRate	1.3.6.1.4.1.13191.10.3.1.3.8.1.5	Gauge32	read-only	Input bit rate.
C32 oacQosMatchPreExecuteByte	1.3.6.1.4.1.13191.10.3.1.3.8.1.3	Counter32	read-only	Count of inbound bytes before executing any policy.
C64 oacQosMatchPreExecuteByte64	1.3.6.1.4.1.13191.10.3.1.3.8.1.4	Counter64	read-only	Count64 of inbound bytes before executing any policy.
C32 oacQosMatchPreExecutePkt	1.3.6.1.4.1.13191.10.3.1.3.8.1.1	Counter32	read-only	Count of inbound packets before executing any policy.
C64 oacQosMatchPreExecutePkt64	1.3.6.1.4.1.13191.10.3.1.3.8.1.2	Counter64	read-only	Count64 of inbound packets before executing any policy.
oacQosMatchStatsEntry	1.3.6.1.4.1.13191.10.3.1.3.8.1		not-accessible
oacQosMatchStatsTable	1.3.6.1.4.1.13191.10.3.1.3.8		not-accessible	This table specifies the match statements statistics.
oacQosObjectsEntry	1.3.6.1.4.1.13191.10.3.1.3.3.1		not-accessible
G32 oacQosObjectsIndex	1.3.6.1.4.1.13191.10.3.1.3.3.1.1	Gauge32	not-accessible	Each object has and unique index.
oacQosObjectsTable	1.3.6.1.4.1.13191.10.3.1.3.3		not-accessible	This tables describes the hierarchy of objects(policies, classmaps, actions, match statements). A policy can contain several classmaps, a classmap several match statements, etc. For each object there is also an index to the corresponding config table.
QOS oacQosObjectsType	1.3.6.1.4.1.13191.10.3.1.3.3.1.3	QosObjectType	read-only	The type of the object: policymap, or classmap, or matchStatement, etc.
G32 oacQosParentObjectsIndex	1.3.6.1.4.1.13191.10.3.1.3.3.1.4	Gauge32	read-only	The index of the parent object.
POL oacQosPoliceActionConfigConform	1.3.6.1.4.1.13191.10.3.1.3.11.1.2	PoliceAction	read-only	Action taken when traffic does not exceed conform token bucket.
G32 oacQosPoliceActionConfigConformSetValue	1.3.6.1.4.1.13191.10.3.1.3.11.1.3	Gauge32	read-only	New value set for each conform packets. If Action action does not required a set value, this object is set to zero.
oacQosPoliceActionConfigEntry	1.3.6.1.4.1.13191.10.3.1.3.11.1		not-accessible
POL oacQosPoliceActionConfigExceed	1.3.6.1.4.1.13191.10.3.1.3.11.1.4	PoliceAction	read-only	Action taken when traffic is between conform and exceed token buckets.
G32 oacQosPoliceActionConfigExceedSetValue	1.3.6.1.4.1.13191.10.3.1.3.11.1.5	Gauge32	read-only	New value set for each exceed packets. If action does not required a set value, this object is set to zero.
G32 oacQosPoliceActionConfigIndex	1.3.6.1.4.1.13191.10.3.1.3.11.1.1	Gauge32	not-accessible
oacQosPoliceActionConfigTable	1.3.6.1.4.1.13191.10.3.1.3.11		not-accessible	This table specifies Traffic Conditioning Action configuration.
POL oacQosPoliceActionConfigViolate	1.3.6.1.4.1.13191.10.3.1.3.11.1.6	PoliceAction	read-only	Action taken when traffic exceeds conform token bucket.
G32 oacQosPoliceActionConfigViolateSetValue	1.3.6.1.4.1.13191.10.3.1.3.11.1.7	Gauge32	read-only	New value set for each violate packets. If action does not required a set value, this object is set to zero.
G32 oacQosPoliceConfigCir	1.3.6.1.4.1.13191.10.3.1.3.10.1.1	Gauge32	read-only	Committed Information Rate.
C64 oacQosPoliceConfigCir64	1.3.6.1.4.1.13191.10.3.1.3.10.1.2	Counter64	read-only	Committed Information Rate.
POL oacQosPoliceConfigConformAction	1.3.6.1.4.1.13191.10.3.1.3.10.1.6	PoliceAction	read-only
G32 oacQosPoliceConfigConformBurstSize	1.3.6.1.4.1.13191.10.3.1.3.10.1.3	Gauge32	read-only	Committed Burst Size.
G32 oacQosPoliceConfigConformSetValue	1.3.6.1.4.1.13191.10.3.1.3.10.1.7	Gauge32	read-only
oacQosPoliceConfigEntry	1.3.6.1.4.1.13191.10.3.1.3.10.1		not-accessible
POL oacQosPoliceConfigExceedAction	1.3.6.1.4.1.13191.10.3.1.3.10.1.8	PoliceAction	read-only
G32 oacQosPoliceConfigExceedSetValue	1.3.6.1.4.1.13191.10.3.1.3.10.1.9	Gauge32	read-only
G32 oacQosPoliceConfigPeakBurstSize	1.3.6.1.4.1.13191.10.3.1.3.10.1.5	Gauge32	read-only	Peak Burst Size.
G32 oacQosPoliceConfigPir	1.3.6.1.4.1.13191.10.3.1.3.10.1.4	Gauge32	read-only	Peak Information Rate.
oacQosPoliceConfigTable	1.3.6.1.4.1.13191.10.3.1.3.10		not-accessible	This table specifies Traffic Conditioning configuration information
POL oacQosPoliceConfigViolateAction	1.3.6.1.4.1.13191.10.3.1.3.10.1.10	PoliceAction	read-only
G32 oacQosPoliceConfigViolateSetValue	1.3.6.1.4.1.13191.10.3.1.3.10.1.11	Gauge32	read-only
G32 oacQosPoliceConformBitRate	1.3.6.1.4.1.13191.10.3.1.3.12.1.5	Gauge32	read-only	The conform traffic rate.
C32 oacQosPoliceConformByte	1.3.6.1.4.1.13191.10.3.1.3.12.1.3	Counter32	read-only	Count of conformed bytes.
C64 oacQosPoliceConformByte64	1.3.6.1.4.1.13191.10.3.1.3.12.1.4	Counter64	read-only	Count64 of conformed bytes.
C32 oacQosPoliceConformPkt	1.3.6.1.4.1.13191.10.3.1.3.12.1.1	Counter32	read-only	Count of conformed packets.
C64 oacQosPoliceConformPkt64	1.3.6.1.4.1.13191.10.3.1.3.12.1.2	Counter64	read-only	Count64 of conformed packets.
G32 oacQosPoliceExceedBitRate	1.3.6.1.4.1.13191.10.3.1.3.12.1.10	Gauge32	read-only	The exceed traffic rate.
C32 oacQosPoliceExceedByte	1.3.6.1.4.1.13191.10.3.1.3.12.1.8	Counter32	read-only	Count of exceeded bytes.
C64 oacQosPoliceExceedByte64	1.3.6.1.4.1.13191.10.3.1.3.12.1.9	Counter64	read-only	Count64 of exceeded bytes.
C32 oacQosPoliceExceedPkt	1.3.6.1.4.1.13191.10.3.1.3.12.1.6	Counter32	read-only	Count of exceeded packets.
C64 oacQosPoliceExceedPkt64	1.3.6.1.4.1.13191.10.3.1.3.12.1.7	Counter64	read-only	Count64 of exceeded packets.
oacQosPoliceStatsEntry	1.3.6.1.4.1.13191.10.3.1.3.12.1		not-accessible
oacQosPoliceStatsTable	1.3.6.1.4.1.13191.10.3.1.3.12		not-accessible	This table specifies Traffic Conditioning Statistics information.
G32 oacQosPoliceViolateBitRate	1.3.6.1.4.1.13191.10.3.1.3.12.1.15	Gauge32	read-only	The violate traffic rate.
C32 oacQosPoliceViolateByte	1.3.6.1.4.1.13191.10.3.1.3.12.1.13	Counter32	read-only	Count of violated bytes.
C64 oacQosPoliceViolateByte64	1.3.6.1.4.1.13191.10.3.1.3.12.1.14	Counter64	read-only	Count64 of violated bytes.
C32 oacQosPoliceViolatePkt	1.3.6.1.4.1.13191.10.3.1.3.12.1.11	Counter32	read-only	Count of violated packets.
C64 oacQosPoliceViolatePkt64	1.3.6.1.4.1.13191.10.3.1.3.12.1.12	Counter64	read-only	Count64 of violated packets.
TRA oacQosPolicyDirection	1.3.6.1.4.1.13191.10.3.1.3.1.1.4	TrafficDirection	read-only	Policy direction (input or output).
G32 oacQosPolicyIndex	1.3.6.1.4.1.13191.10.3.1.3.1.1.1	Gauge32	not-accessible	Each policy has a distinct index.
oacQosPolicyMapConfigEntry	1.3.6.1.4.1.13191.10.3.1.3.4.1		not-accessible
oacQosPolicyMapConfigTable	1.3.6.1.4.1.13191.10.3.1.3.4		not-accessible	This Table specifies the policy maps configuration.
STR oacQosPolicyMapName	1.3.6.1.4.1.13191.10.3.1.3.4.1.1	DisplayString	read-only	Policy map name.
I32 oacQosQueueConfigBandwidth	1.3.6.1.4.1.13191.10.3.1.3.16.1.3	Integer32	read-only	Indicate the bandwidth configured to this class.
QUE oacQosQueueConfigBandwidthUnits	1.3.6.1.4.1.13191.10.3.1.3.16.1.4	QueueingBandwidthUnits	read-only	Indicate the bandwidth unit.
oacQosQueueConfigEntry	1.3.6.1.4.1.13191.10.3.1.3.16.1		not-accessible
T/F oacQosQueueConfigFlowBasedEnabled	1.3.6.1.4.1.13191.10.3.1.3.16.1.1	TruthValue	read-only	Indicate if Flow-Based WFQ is enable.
I32 oacQosQueueConfigFlowBasedQNumber	1.3.6.1.4.1.13191.10.3.1.3.16.1.6	Integer32	read-only	The number of dynamic queues reserved for Flow-Based WFQ.
I32 oacQosQueueConfigFlowBasedQSize	1.3.6.1.4.1.13191.10.3.1.3.16.1.5	Integer32	read-only	The maximum number of packets allowed for each Flow-Based WFQ queues.
G32 oacQosQueueConfigPrioBurstSize	1.3.6.1.4.1.13191.10.3.1.3.16.1.7	Gauge32	read-only
T/F oacQosQueueConfigPriorityEnabled	1.3.6.1.4.1.13191.10.3.1.3.16.1.2	TruthValue	read-only	Indicate if this class used priority queueing.
QOS oacQosQueueConfigQueueLimit	1.3.6.1.4.1.13191.10.3.1.3.16.1.9	QosQueueDepth	read-only	The queue limit unit.
QOS oacQosQueueConfigQueueLimitUnits	1.3.6.1.4.1.13191.10.3.1.3.16.1.8	QosQueueUnitType	read-only	The maximum number of packets allowed for all queues associated for this class.
oacQosQueueConfigTable	1.3.6.1.4.1.13191.10.3.1.3.16		not-accessible	This table specifies Queue configuration information.
G32 oacQosQueueCurrentQDepth	1.3.6.1.4.1.13191.10.3.1.3.17.1.5	Gauge32	read-only	The current depth of the queue.
C32 oacQosQueueDiscardByte	1.3.6.1.4.1.13191.10.3.1.3.17.1.1	Counter32	read-only	Count of bytes dropped by queueing.
C64 oacQosQueueDiscardByte64	1.3.6.1.4.1.13191.10.3.1.3.17.1.2	Counter64	read-only	Count64 of bytes dropped by queueing.
C32 oacQosQueueDiscardPkt	1.3.6.1.4.1.13191.10.3.1.3.17.1.3	Counter32	read-only	Count of packets dropped by queueing.
C64 oacQosQueueDiscardPkt64	1.3.6.1.4.1.13191.10.3.1.3.17.1.4	Counter64	read-only	Count64 of packets dropped by queueing.
G32 oacQosQueueMaxQDepth	1.3.6.1.4.1.13191.10.3.1.3.17.1.6	Gauge32	read-only	The maximum depth of the queue.
oacQosQueueStatsEntry	1.3.6.1.4.1.13191.10.3.1.3.17.1		not-accessible
oacQosQueueStatsTable	1.3.6.1.4.1.13191.10.3.1.3.17		not-accessible	This table specifies Queue statistics information.
oacQosServicePolicyEntry	1.3.6.1.4.1.13191.10.3.1.3.1.1		not-accessible
oacQosServicePolicyTable	1.3.6.1.4.1.13191.10.3.1.3.1		not-accessible	This table describes the interfaces that have attached policies.
G32 oacQosSetConfigDiscardClassValue	1.3.6.1.4.1.13191.10.3.1.3.9.1.5	Gauge32	read-only
oacQosSetConfigEntry	1.3.6.1.4.1.13191.10.3.1.3.9.1		not-accessible
SET oacQosSetConfigFeature	1.3.6.1.4.1.13191.10.3.1.3.9.1.1	SetFeatureType	read-only
I32 oacQosSetConfigIpDSCPValue	1.3.6.1.4.1.13191.10.3.1.3.9.1.2	Integer32	read-only	The IP DSCP value.
I32 oacQosSetConfigIpPrecedenceValue	1.3.6.1.4.1.13191.10.3.1.3.9.1.3	Integer32	read-only	The IP Precedence value.
I32 oacQosSetConfigQosGroupValue	1.3.6.1.4.1.13191.10.3.1.3.9.1.4	Integer32	read-only	The Qos Group value.
oacQosSetConfigTable	1.3.6.1.4.1.13191.10.3.1.3.9		not-accessible	This table specifies Actions configuration.
QOS oacQosWREDAverageQueueSize	1.3.6.1.4.1.13191.10.3.1.3.15.1.2	QosQueueDepth	read-only	The average queue size used by WRED.
QOS oacQosWREDAverageQueueSizeUnits	1.3.6.1.4.1.13191.10.3.1.3.15.1.1	QosQueueUnitType	read-only	The queue size unit type.
oacQosWREDClassConfigEntry	1.3.6.1.4.1.13191.10.3.1.3.14.1		not-accessible
QOS oacQosWREDClassConfigMaxThreshold	1.3.6.1.4.1.13191.10.3.1.3.14.1.5	QosQueueDepth	read-only	The maximum WRED threshold value.
QOS oacQosWREDClassConfigMinThreshold	1.3.6.1.4.1.13191.10.3.1.3.14.1.4	QosQueueDepth	read-only	The minimum WRED threshold value.
oacQosWREDClassConfigTable	1.3.6.1.4.1.13191.10.3.1.3.14		not-accessible	This table specifies the WRED configuration information for each value.
QOS oacQosWREDClassConfigThresholdUnit	1.3.6.1.4.1.13191.10.3.1.3.14.1.3	QosQueueUnitType	read-only	The unit to specify WRED thresholds.
oacQosWREDClassStatsEntry	1.3.6.1.4.1.13191.10.3.1.3.15.1		not-accessible
oacQosWREDClassStatsTable	1.3.6.1.4.1.13191.10.3.1.3.15		not-accessible	This table specifies the WRED statistics information.
WRE oacQosWREDConfigDscpPrecQosGroup	1.3.6.1.4.1.13191.10.3.1.3.13.1.2	WREDMechanism	read-only	The WRED based mechanism.
T/F oacQosWREDConfigECNEnabled	1.3.6.1.4.1.13191.10.3.1.3.13.1.3	TruthValue	read-only	Indicate if Explicit Congestion Notification is enabled.
oacQosWREDConfigEntry	1.3.6.1.4.1.13191.10.3.1.3.13.1		not-accessible
I32 oacQosWREDConfigExponentialWeight	1.3.6.1.4.1.13191.10.3.1.3.13.1.1	Integer32	read-only	The exponential weighting factor used to compute average queue size.
I32 oacQosWREDConfigPktDropProb	1.3.6.1.4.1.13191.10.3.1.3.14.1.2	Integer32	read-only	The Mark Probality Drop factor.
oacQosWREDConfigTable	1.3.6.1.4.1.13191.10.3.1.3.13		not-accessible	This table specifies the WRED configuration information
C32 oacQosWREDECNMarkByte	1.3.6.1.4.1.13191.10.3.1.3.15.1.17	Counter32	read-only	Count of bytes marked with ECN.
C64 oacQosWREDECNMarkByte64	1.3.6.1.4.1.13191.10.3.1.3.15.1.18	Counter64	read-only	Count of bytes marked with ECN.
C32 oacQosWREDECNMarkPkt	1.3.6.1.4.1.13191.10.3.1.3.15.1.15	Counter32	read-only	Count of packets marked with ECN.
C64 oacQosWREDECNMarkPkt64	1.3.6.1.4.1.13191.10.3.1.3.15.1.16	Counter64	read-only	Count64 of packets marked with ECN.
C32 oacQosWREDRandomDropByte	1.3.6.1.4.1.13191.10.3.1.3.15.1.5	Counter32	read-only	Count of bytes dropped ramdomly.
C64 oacQosWREDRandomDropByte64	1.3.6.1.4.1.13191.10.3.1.3.15.1.6	Counter64	read-only	Count64 of bytes dropped ramdomly.
C32 oacQosWREDRandomDropPkt	1.3.6.1.4.1.13191.10.3.1.3.15.1.3	Counter32	read-only	Count of packets dropped ramdomly.
C64 oacQosWREDRandomDropPkt64	1.3.6.1.4.1.13191.10.3.1.3.15.1.4	Counter64	read-only	Count64 of packets dropped ramdomly.
C32 oacQosWREDTailDropByte	1.3.6.1.4.1.13191.10.3.1.3.15.1.9	Counter32	read-only	Count of bytes dropped when the number of packets exceeds the maximum threshold.
C64 oacQosWREDTailDropByte64	1.3.6.1.4.1.13191.10.3.1.3.15.1.10	Counter64	read-only	Count64 of bytes dropped when the number of packets exceeds the maximum threshold.
C32 oacQosWREDTailDropPkt	1.3.6.1.4.1.13191.10.3.1.3.15.1.7	Counter32	read-only	Count of packets dropped when the number of packets exceeds the maximum threshold.
C64 oacQosWREDTailDropPkt64	1.3.6.1.4.1.13191.10.3.1.3.15.1.8	Counter64	read-only	Count64 of packets dropped when the number of packets exceeds the maximum threshold.
C32 oacQosWREDTransmitByte	1.3.6.1.4.1.13191.10.3.1.3.15.1.13	Counter32	read-only	Count of bytes transmitted.
C64 oacQosWREDTransmitByte64	1.3.6.1.4.1.13191.10.3.1.3.15.1.14	Counter64	read-only	Count64 of bytes transmitted.
C32 oacQosWREDTransmitPkt	1.3.6.1.4.1.13191.10.3.1.3.15.1.11	Counter32	read-only	Count of packets transmitted.
C64 oacQosWREDTransmitPkt64	1.3.6.1.4.1.13191.10.3.1.3.15.1.12	Counter64	read-only	Count64 of packets transmitted.
I32 oacQosWREDValue	1.3.6.1.4.1.13191.10.3.1.3.14.1.1	Integer32	not-accessible	The DSCP, Precedence or QosGroup value.

RFC description

Quality of Service policy management for OneAccess routers and network devices.

Start monitoring OneAccess CPE router (QoS traffic shaping/class-of-service policy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download OA-QOS-MIB