Novell-LANalyzer-Ext-MIB :: rpHostMonitorControlTimeout

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNovell-LANalyzer-Ext-MIBrpHostMonitorControlTimeout

rpHostMonitorControlTimeout

Module: Novell-LANalyzer-Ext-MIB

OID (symbolic): Novell-LANalyzer-Ext-MIB::rpHostMonitorControlTimeout

OID (numeric): 1.3.6.1.4.1.23.2.13.2.2.1.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The amount of time in minutes a host is allowed to be inactive before it is reported to be dead via an rpHostInactive trap. Subsequent traps will not be sent for the same host until the host has transmitted a packet and timed-out again.

A value of 0 disables the monitoring of this table.

What is rpHostMonitorControlTimeout?

This read-write value sets how many minutes (0-60) a host can go without transmitting before it's reported dead via the rpHostInactive trap; a value of 0 disables monitoring for this table. Admins tune it based on expected host chattiness, for example allowing 15 minutes of silence for a server that only sends periodic heartbeat traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.23.2.13.2.2.1.1.5
snmpwalk -v2c -c public <target> Novell-LANalyzer-Ext-MIB::rpHostMonitorControlTimeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.23.2.13.2.2.1.1.5.1
snmpget -v2c -c public <target> Novell-LANalyzer-Ext-MIB::rpHostMonitorControlTimeout.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.23.2.13.2.2.1.1.5.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rpHostMonitorControlTimeout.1

Start monitoring Novell LANalyzer network analyzers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Novell-LANalyzer-Ext-MIB::rpHostMonitorControlTimeout OID value, configure state conditions and alerts, and monitor any Novell LANalyzer network analyzers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.23novellGWADA-MIB
1.3.6.1.4.1.23.2mibDocGWADA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.23.2.13rmonPlus_mibNovell-LANalyzer-Ext-MIB
1.3.6.1.4.1.23.2.13.2rmonExtensionsNovell-LANalyzer-Ext-MIB
1.3.6.1.4.1.23.2.13.2.2rpHostMonitorNovell-LANalyzer-Ext-MIB
1.3.6.1.4.1.23.2.13.2.2.1rpHostMonitorControlTableNovell-LANalyzer-Ext-MIB
1.3.6.1.4.1.23.2.13.2.2.1.1rpHostMonitorControlEntryNovell-LANalyzer-Ext-MIB
1.3.6.1.4.1.23.2.13.2.2.1.1.5rpHostMonitorControlTimeoutNovell-LANalyzer-Ext-MIB