All MIBs › Nortel-MsCarrier-MscPassport-VnetEtsiQsigMIB › mscSigChanEQsigE1ChannelNumbers
mscSigChanEQsigE1ChannelNumbers
Module: Nortel-MsCarrier-MscPassport-VnetEtsiQsigMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-VnetEtsiQsigMIB::mscSigChanEQsigE1ChannelNumbers
OID (numeric): 1.3.6.1.4.1.562.36.2.1.115.2.18.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute is applicable to E1 interfaces only. It specifies the mapping scheme between channel numbers (identified in Layer 3 messages) and timeslot numbers on the E1 link. When the attribute value is skip16, channel numbers map directly to actual E1 timeslots; therefore only channel numbers 1 - 15 and 17 - 31 are expected. When the value is contiguous, channel numbers from 1 - 30 are expected, and the following mapping is used: channels 1 - 15 are mapped to timeslots 1 - 15, and channels 16 - 30 are mapped to timeslots 17 - 31. On T1 interfaces, channel numbers are always expected in the range 1 - 23.
What is mscSigChanEQsigE1ChannelNumbers?
This OID sets the E1 channel-to-timeslot mapping scheme for this EtsiQsig interface: skip16(1) - the default - maps channel numbers directly to timeslots (skipping timeslot 16), while contiguous(2) maps channels 1-30 sequentially onto timeslots 1-15 and 17-31. Admins set this to match how the connected PBX numbers its E1 channels; it doesn't apply to T1 interfaces, which always use channels 1-23.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.115.2.18.1.2 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-VnetEtsiQsigMIB::mscSigChanEQsigE1ChannelNumbers
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.115.2.18.1.2.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-VnetEtsiQsigMIB::mscSigChanEQsigE1ChannelNumbers.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.115.2.18.1.2.1 i <value>
Start monitoring Nortel Passport WAN switch (ETSI QSIG signalling channels) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-VnetEtsiQsigMIB::mscSigChanEQsigE1ChannelNumbers OID value, configure state conditions and alerts, and monitor any Nortel Passport WAN switch (ETSI QSIG signalling channels) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.115 | mscSigChan | Nortel-MsCarrier-MscPassport-VoiceNetworkingMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.115.2 | mscSigChanEQsig | Nortel-MsCarrier-MscPassport-VnetEtsiQsigMIB |
| 1.3.6.1.4.1.562.36.2.1.115.2.18 | mscSigChanEQsigEQsigSpecificProvTable | Nortel-MsCarrier-MscPassport-VnetEtsiQsigMIB |
| 1.3.6.1.4.1.562.36.2.1.115.2.18.1 | mscSigChanEQsigEQsigSpecificProvEntry | Nortel-MsCarrier-MscPassport-VnetEtsiQsigMIB |
| 1.3.6.1.4.1.562.36.2.1.115.2.18.1.2 | mscSigChanEQsigE1ChannelNumbers | Nortel-MsCarrier-MscPassport-VnetEtsiQsigMIB |