All MIBs › Nortel-MsCarrier-MscPassport-TimeMIB › mscNSClockSyncState
mscNSClockSyncState
Module: Nortel-MsCarrier-MscPassport-TimeMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-TimeMIB::mscNSClockSyncState
OID (numeric): 1.3.6.1.4.1.562.36.2.1.20.12.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: When the clockSyncState is in the freeRun state, either no reference have beed provisioned or none of the provisioned references have been found to be valid. The Stratum-3 clock is allowed to run freely at its last adjusted frequency. When the clockSyncState is in the synchronizing state, the Stratum-3 is trying to synchronize in frequency to a valid provisioned reference. This state should last approximately 1-2 minutes, provided the reference is stable. Once frequency synchronization is acheived, a null phase is acquired and the clockSyncState enters the synchronized state. In this state, both phase and frequency are tracked and compensated for. This node is now ready to support transparent data services.
What is mscNSClockSyncState?
Shows the network clock's synchronization phase: freeRun (no valid reference, Stratum-3 clock coasting on its last frequency), synchronizing (locking onto a reference, typically taking 1-2 minutes), or synchronized (both phase and frequency are tracked, and the node is ready to support transparent data services).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.20.12.1.1 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-TimeMIB::mscNSClockSyncState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.20.12.1.1.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-TimeMIB::mscNSClockSyncState.1
Start monitoring Nortel MsCarrier MscPassport switch (system time synchronization) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-TimeMIB::mscNSClockSyncState OID value, configure state conditions and alerts, and monitor any Nortel MsCarrier MscPassport switch (system time synchronization) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.20 | mscNS | Nortel-MsCarrier-MscPassport-TimeMIB |
| 1.3.6.1.4.1.562.36.2.1.20.12 | mscNSOperTable | Nortel-MsCarrier-MscPassport-TimeMIB |
| 1.3.6.1.4.1.562.36.2.1.20.12.1 | mscNSOperEntry | Nortel-MsCarrier-MscPassport-TimeMIB |
| 1.3.6.1.4.1.562.36.2.1.20.12.1.1 | mscNSClockSyncState | Nortel-MsCarrier-MscPassport-TimeMIB |