All MIBs › Nortel-MsCarrier-MscPassport-AtmUniMIB › mscAtmIfVptUniLoopPrevention
mscAtmIfVptUniLoopPrevention
Module: Nortel-MsCarrier-MscPassport-AtmUniMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmUniMIB::mscAtmIfVptUniLoopPrevention
OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether loop prevention is in effect on this interface.
When the value is enabled, incoming calls on this interface cannot be routed back out the same interface. When the value is disabled, routing of incoming calls back out the same interface is permitted.
The recommended value is enabled. The value disabled should only be used if routing of incoming calls back out over this interface is actually required. As an example, the value disabled might be needed if the interface is connected to an end-user multiplexing device which has no routing capability.
Note that setting the value to enabled prevents only routing loops which involve two network nodes.
What is mscAtmIfVptUniLoopPrevention?
Enables or disables loop prevention on this VPT UNI, preventing calls received over the tunnel from being routed straight back out it; like the physical-UNI setting it defaults to enabled(1) and should stay that way except for special end-device cases.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.6 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmUniMIB::mscAtmIfVptUniLoopPrevention
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.6.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmUniMIB::mscAtmIfVptUniLoopPrevention.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.6.1 i <value>
Start monitoring Nortel MSCarrier Passport (Magellan Passport) ATM switch (UNI signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmUniMIB::mscAtmIfVptUniLoopPrevention OID value, configure state conditions and alerts, and monitor any Nortel MSCarrier Passport (Magellan Passport) ATM switch (UNI signaling) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.114 | mscAtmIf | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9 | mscAtmIfVpt | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.9.8 | mscAtmIfVptUni | Nortel-MsCarrier-MscPassport-AtmUniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.8.10 | mscAtmIfVptUniProvTable | Nortel-MsCarrier-MscPassport-AtmUniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.8.10.1 | mscAtmIfVptUniProvEntry | Nortel-MsCarrier-MscPassport-AtmUniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.9.8.10.1.6 | mscAtmIfVptUniLoopPrevention | Nortel-MsCarrier-MscPassport-AtmUniMIB |