Nortel-MsCarrier-MscPassport-AtmUniMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 mscPassportMIBs FROM Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Counter32, DisplayString, StorageType, RowStatus, Gauge32, Integer32, Unsigned32 FROM Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB AsciiString, Hex, NonReplicated, HexString, AsciiStringIndex FROM Nortel-MsCarrier-MscPassport-TextualConventionsMIB mscAtmIf, mscAtmIfVptIndex, mscAtmIfVpt, mscAtmIfIndex FROM Nortel-MsCarrier-MscPassport-AtmCoreMIB; -- LAST-UPDATED "9909010000Z" -- ORGANIZATION "Nortel Networks" -- CONTACT-INFO " -- Nortel Carrier Data Network Management -- -- Postal: P.O. Box 3511, Station C -- Ottawa, Ontario -- Canada K1Y 4H7 -- -- via the WEB: http://www.nortelnetworks.com -- select 'Contact Us' from the menu -- -- via phone: 1-800-4NORTEL" -- DESCRIPTION -- "The module describing the Nortel MsCarrier MscPassport -- AtmUni Enterprise MIB." atmUniMIB OBJECT IDENTIFIER ::= { mscPassportMIBs 69 } -- AtmIf/n Uni -- This component represents an ATM UNI interface. If this -- component is provisioned the Iisp component can not be -- provisioned under that AtmIf component. If this component is -- deleted, then all associated Vcc components are deleted. mscAtmIfUni OBJECT IDENTIFIER ::= { mscAtmIf 6 } mscAtmIfUniRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfUni components." ::= { mscAtmIfUni 1 } mscAtmIfUniRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfUniRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfUni component." INDEX { mscAtmIfIndex, mscAtmIfUniIndex } ::= { mscAtmIfUniRowStatusTable 1 } MscAtmIfUniRowStatusEntry ::= SEQUENCE { mscAtmIfUniRowStatus RowStatus, mscAtmIfUniComponentName DisplayString, mscAtmIfUniStorageType StorageType, mscAtmIfUniIndex NonReplicated } mscAtmIfUniRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfUni components. These components can be added and deleted." ::= { mscAtmIfUniRowStatusEntry 1 } mscAtmIfUniComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfUniRowStatusEntry 2 } mscAtmIfUniStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfUni tables." ::= { mscAtmIfUniRowStatusEntry 4 } mscAtmIfUniIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfUni tables." ::= { mscAtmIfUniRowStatusEntry 10 } mscAtmIfUniProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the Uni component." ::= { mscAtmIfUni 10 } mscAtmIfUniProvEntry OBJECT-TYPE SYNTAX MscAtmIfUniProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniProvTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex } ::= { mscAtmIfUniProvTable 1 } MscAtmIfUniProvEntry ::= SEQUENCE { mscAtmIfUniVersion INTEGER, mscAtmIfUniSide INTEGER, mscAtmIfUniSoftPvcRetryPeriod Unsigned32, mscAtmIfUniSoftPvpAndPvcRetryPeriod Unsigned32, mscAtmIfUniSoftPvpAndPvcHoldOffTime Unsigned32, mscAtmIfUniLoopPrevention INTEGER } mscAtmIfUniVersion OBJECT-TYPE SYNTAX INTEGER { atmForum30(0), atmForum31(1), atmForum40(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies which specification the UNI complies with. The options are ATM FORUM 3.0, ATM FORUM 3.1 or ATM FORUM 4.0. If this attribute is changed then all switched Vcc components in this interface are cleared due to the fact that the two versions are incompatible." DEFVAL { atmForum40 } ::= { mscAtmIfUniProvEntry 1 } mscAtmIfUniSide OBJECT-TYPE SYNTAX INTEGER { network(0), user(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates which side the interface is, user or network." DEFVAL { network } ::= { mscAtmIfUniProvEntry 2 } mscAtmIfUniSoftPvcRetryPeriod OBJECT-TYPE SYNTAX Unsigned32 (20..999999) ACCESS read-write STATUS obsolete DESCRIPTION "This attribute represents the time in seconds to wait between call set up retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute." DEFVAL { 60 } ::= { mscAtmIfUniProvEntry 3 } mscAtmIfUniSoftPvpAndPvcRetryPeriod OBJECT-TYPE SYNTAX Unsigned32 (20..999999) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute represents the time in seconds to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds." DEFVAL { 60 } ::= { mscAtmIfUniProvEntry 4 } mscAtmIfUniSoftPvpAndPvcHoldOffTime OBJECT-TYPE SYNTAX Unsigned32 (0 | 50..20000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms." DEFVAL { 0 } ::= { mscAtmIfUniProvEntry 5 } mscAtmIfUniLoopPrevention OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether loop prevention is in effect on this interface. When the value is enabled, incoming calls on this interface cannot be routed back out the same interface. When the value is disabled, routing of incoming calls back out the same interface is permitted. The recommended value is enabled. The value disabled should only be used if routing of incoming calls back out over this interface is actually required. As an example, the value disabled might be needed if the interface is connected to an end-user multiplexing device which has no routing capability. Note that setting the value to enabled prevents only routing loops which involve two network nodes." DEFVAL { enabled } ::= { mscAtmIfUniProvEntry 6 } mscAtmIfUniOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the operational attributes for the Uni component." ::= { mscAtmIfUni 11 } mscAtmIfUniOperEntry OBJECT-TYPE SYNTAX MscAtmIfUniOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniOperTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex } ::= { mscAtmIfUniOperTable 1 } MscAtmIfUniOperEntry ::= SEQUENCE { mscAtmIfUniMacAddress AsciiString } mscAtmIfUniMacAddress OBJECT-TYPE SYNTAX AsciiString (SIZE (12)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the MAC address of the port, which is used for address registration of the user side as the default ESI." ::= { mscAtmIfUniOperEntry 1 } mscAtmIfUniAcctOptTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniAcctOptEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for accounting." ::= { mscAtmIfUni 12 } mscAtmIfUniAcctOptEntry OBJECT-TYPE SYNTAX MscAtmIfUniAcctOptEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniAcctOptTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex } ::= { mscAtmIfUniAcctOptTable 1 } MscAtmIfUniAcctOptEntry ::= SEQUENCE { mscAtmIfUniAccountCollection OCTET STRING, mscAtmIfUniAccountConnectionType INTEGER, mscAtmIfUniAccountClass Unsigned32, mscAtmIfUniServiceExchange Unsigned32 } mscAtmIfUniAccountCollection OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)" ::= { mscAtmIfUniAcctOptEntry 1 } mscAtmIfUniAccountConnectionType OBJECT-TYPE SYNTAX INTEGER { origTerm(0), intermediate(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate." DEFVAL { origTerm } ::= { mscAtmIfUniAcctOptEntry 2 } mscAtmIfUniAccountClass OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate." DEFVAL { 0 } ::= { mscAtmIfUniAcctOptEntry 3 } mscAtmIfUniServiceExchange OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate." DEFVAL { 0 } ::= { mscAtmIfUniAcctOptEntry 4 } -- AtmIf/n Uni Ilmi -- This component represents the Interim Local Management Interface -- (ILMI) protocol on the interface. mscAtmIfUniIlmi OBJECT IDENTIFIER ::= { mscAtmIfUni 2 } mscAtmIfUniIlmiRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniIlmiRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfUniIlmi components." ::= { mscAtmIfUniIlmi 1 } mscAtmIfUniIlmiRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfUniIlmiRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfUniIlmi component." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniIlmiIndex } ::= { mscAtmIfUniIlmiRowStatusTable 1 } MscAtmIfUniIlmiRowStatusEntry ::= SEQUENCE { mscAtmIfUniIlmiRowStatus RowStatus, mscAtmIfUniIlmiComponentName DisplayString, mscAtmIfUniIlmiStorageType StorageType, mscAtmIfUniIlmiIndex NonReplicated } mscAtmIfUniIlmiRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfUniIlmi components. These components cannot be added nor deleted." ::= { mscAtmIfUniIlmiRowStatusEntry 1 } mscAtmIfUniIlmiComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfUniIlmiRowStatusEntry 2 } mscAtmIfUniIlmiStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfUniIlmi tables." ::= { mscAtmIfUniIlmiRowStatusEntry 4 } mscAtmIfUniIlmiIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfUniIlmi tables." ::= { mscAtmIfUniIlmiRowStatusEntry 10 } mscAtmIfUniIlmiStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniIlmiStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscAtmIfUniIlmi 10 } mscAtmIfUniIlmiStateEntry OBJECT-TYPE SYNTAX MscAtmIfUniIlmiStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniIlmiStateTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniIlmiIndex } ::= { mscAtmIfUniIlmiStateTable 1 } MscAtmIfUniIlmiStateEntry ::= SEQUENCE { mscAtmIfUniIlmiAdminState INTEGER, mscAtmIfUniIlmiOperationalState INTEGER, mscAtmIfUniIlmiUsageState INTEGER } mscAtmIfUniIlmiAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscAtmIfUniIlmiStateEntry 1 } mscAtmIfUniIlmiOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscAtmIfUniIlmiStateEntry 2 } mscAtmIfUniIlmiUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscAtmIfUniIlmiStateEntry 3 } mscAtmIfUniIlmiProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniIlmiProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the provisionable attributes for the Ilmi component." ::= { mscAtmIfUniIlmi 11 } mscAtmIfUniIlmiProvEntry OBJECT-TYPE SYNTAX MscAtmIfUniIlmiProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniIlmiProvTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniIlmiIndex } ::= { mscAtmIfUniIlmiProvTable 1 } MscAtmIfUniIlmiProvEntry ::= SEQUENCE { mscAtmIfUniIlmiVci Unsigned32, mscAtmIfUniIlmiOperatingMode INTEGER } mscAtmIfUniIlmiVci OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the ILMI channel number." DEFVAL { 16 } ::= { mscAtmIfUniIlmiProvEntry 1 } mscAtmIfUniIlmiOperatingMode OBJECT-TYPE SYNTAX INTEGER { addressRegEnabled(0), addressRegDisabled(1), ilmiDisabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to enable/disable the ILMI protocol. addressRegEnabled indicates that the ILMI address registration protocol is enabled. addressRegDisabled indicates that the ILMI address registration protocol is disabled. ilmiDisabled indicates that all of ILMI is disabled." DEFVAL { addressRegEnabled } ::= { mscAtmIfUniIlmiProvEntry 2 } mscAtmIfUniIlmiStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniIlmiStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the statistics for the AtmIlmi component." ::= { mscAtmIfUniIlmi 12 } mscAtmIfUniIlmiStatsEntry OBJECT-TYPE SYNTAX MscAtmIfUniIlmiStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniIlmiStatsTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniIlmiIndex } ::= { mscAtmIfUniIlmiStatsTable 1 } MscAtmIfUniIlmiStatsEntry ::= SEQUENCE { mscAtmIfUniIlmiTxPdus Counter32, mscAtmIfUniIlmiRxPdus Counter32, mscAtmIfUniIlmiRxBadPdusDiscarded Counter32 } mscAtmIfUniIlmiTxPdus OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of transmitted ILMI PDUs. The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfUniIlmiStatsEntry 1 } mscAtmIfUniIlmiRxPdus OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of received ILMI PDUs.The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfUniIlmiStatsEntry 2 } mscAtmIfUniIlmiRxBadPdusDiscarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of received ILMI PDUs that were discarded due to invalid SNMP format. The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfUniIlmiStatsEntry 3 } mscAtmIfUniIlmiPrefixToRegisterTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniIlmiPrefixToRegisterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute is a list of zero or more addresses. If the side attribute in the Uni component is set to user, then this attribute must be empty; if the side attribute is set to network, then this attribute is a list of prefixes.This attribute represents a list of prefix addresses (26 digits) that are sent to the user side. If no prefixes are entered, then the nodeAddress attribute in the AtmCallRouter component is used for address registration." ::= { mscAtmIfUniIlmi 287 } mscAtmIfUniIlmiPrefixToRegisterEntry OBJECT-TYPE SYNTAX MscAtmIfUniIlmiPrefixToRegisterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniIlmiPrefixToRegisterTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniIlmiIndex, mscAtmIfUniIlmiPrefixToRegisterValue } ::= { mscAtmIfUniIlmiPrefixToRegisterTable 1 } MscAtmIfUniIlmiPrefixToRegisterEntry ::= SEQUENCE { mscAtmIfUniIlmiPrefixToRegisterValue AsciiString, mscAtmIfUniIlmiPrefixToRegisterRowStatus RowStatus } mscAtmIfUniIlmiPrefixToRegisterValue OBJECT-TYPE SYNTAX AsciiString (SIZE (26)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the mscAtmIfUniIlmiPrefixToRegisterTable." ::= { mscAtmIfUniIlmiPrefixToRegisterEntry 1 } mscAtmIfUniIlmiPrefixToRegisterRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the mscAtmIfUniIlmiPrefixToRegisterTable." ::= { mscAtmIfUniIlmiPrefixToRegisterEntry 2 } mscAtmIfUniIlmiEsiToRegisterTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniIlmiEsiToRegisterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute is a list of zero or more addresses. If the side attribute in the Uni component is set to network, then this attribute must be an empty list; if the side attribute is set to user, then this attribute is a list of end system indicators (ESI) addresses (12 hex digits) that are used to compose addresses to register with the network side." ::= { mscAtmIfUniIlmi 288 } mscAtmIfUniIlmiEsiToRegisterEntry OBJECT-TYPE SYNTAX MscAtmIfUniIlmiEsiToRegisterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniIlmiEsiToRegisterTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniIlmiIndex, mscAtmIfUniIlmiEsiToRegisterValue } ::= { mscAtmIfUniIlmiEsiToRegisterTable 1 } MscAtmIfUniIlmiEsiToRegisterEntry ::= SEQUENCE { mscAtmIfUniIlmiEsiToRegisterValue AsciiString, mscAtmIfUniIlmiEsiToRegisterRowStatus RowStatus } mscAtmIfUniIlmiEsiToRegisterValue OBJECT-TYPE SYNTAX AsciiString (SIZE (12)) ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the mscAtmIfUniIlmiEsiToRegisterTable." ::= { mscAtmIfUniIlmiEsiToRegisterEntry 1 } mscAtmIfUniIlmiEsiToRegisterRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the mscAtmIfUniIlmiEsiToRegisterTable." ::= { mscAtmIfUniIlmiEsiToRegisterEntry 2 } -- AtmIf/n Iisp Signalling -- AtmIf/n Uni Signalling -- AtmIf/n Pnni Signalling -- AtmIf/n Vpt/m Iisp Signalling -- AtmIf/n Vpt/m Uni Signalling -- AtmIf/n Vpt/m Pnni Signalling -- -- This component represents the signalling entities for the interface. mscAtmIfUniSig OBJECT IDENTIFIER ::= { mscAtmIfUni 3 } mscAtmIfUniSigRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniSigRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfUniSig components." ::= { mscAtmIfUniSig 1 } mscAtmIfUniSigRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfUniSigRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfUniSig component." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniSigIndex } ::= { mscAtmIfUniSigRowStatusTable 1 } MscAtmIfUniSigRowStatusEntry ::= SEQUENCE { mscAtmIfUniSigRowStatus RowStatus, mscAtmIfUniSigComponentName DisplayString, mscAtmIfUniSigStorageType StorageType, mscAtmIfUniSigIndex NonReplicated } mscAtmIfUniSigRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfUniSig components. These components cannot be added nor deleted." ::= { mscAtmIfUniSigRowStatusEntry 1 } mscAtmIfUniSigComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfUniSigRowStatusEntry 2 } mscAtmIfUniSigStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfUniSig tables." ::= { mscAtmIfUniSigRowStatusEntry 4 } mscAtmIfUniSigIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfUniSig tables." ::= { mscAtmIfUniSigRowStatusEntry 10 } mscAtmIfUniSigProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniSigProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the provisionable attributes for the Signalling component." ::= { mscAtmIfUniSig 10 } mscAtmIfUniSigProvEntry OBJECT-TYPE SYNTAX MscAtmIfUniSigProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniSigProvTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniSigIndex } ::= { mscAtmIfUniSigProvTable 1 } MscAtmIfUniSigProvEntry ::= SEQUENCE { mscAtmIfUniSigVci Unsigned32, mscAtmIfUniSigAddressConversion INTEGER, mscAtmIfUniSigOperatingMode INTEGER } mscAtmIfUniSigVci OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the signalling channel number." DEFVAL { 5 } ::= { mscAtmIfUniSigProvEntry 1 } mscAtmIfUniSigAddressConversion OBJECT-TYPE SYNTAX INTEGER { none(0), nativeE164(1), nsap(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed." DEFVAL { none } ::= { mscAtmIfUniSigProvEntry 2 } mscAtmIfUniSigOperatingMode OBJECT-TYPE SYNTAX INTEGER { normal(0), provisionedOnly(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the operating mode of the signaling channel. provisionedOnly indicates that only SPVCs and SPVPs are supported on the interface and SVCs are not supported. This value is permitted only on UNI interfaces. normal indicates that SVCs, SPVCs, and SPVPs are supported on the interface." DEFVAL { normal } ::= { mscAtmIfUniSigProvEntry 3 } mscAtmIfUniSigStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniSigStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscAtmIfUniSig 11 } mscAtmIfUniSigStateEntry OBJECT-TYPE SYNTAX MscAtmIfUniSigStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniSigStateTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniSigIndex } ::= { mscAtmIfUniSigStateTable 1 } MscAtmIfUniSigStateEntry ::= SEQUENCE { mscAtmIfUniSigAdminState INTEGER, mscAtmIfUniSigOperationalState INTEGER, mscAtmIfUniSigUsageState INTEGER } mscAtmIfUniSigAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscAtmIfUniSigStateEntry 1 } mscAtmIfUniSigOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscAtmIfUniSigStateEntry 2 } mscAtmIfUniSigUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscAtmIfUniSigStateEntry 3 } mscAtmIfUniSigOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniSigOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute contains the operational attributes for the AtmSignalling component." ::= { mscAtmIfUniSig 12 } mscAtmIfUniSigOperEntry OBJECT-TYPE SYNTAX MscAtmIfUniSigOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniSigOperTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniSigIndex } ::= { mscAtmIfUniSigOperTable 1 } MscAtmIfUniSigOperEntry ::= SEQUENCE { mscAtmIfUniSigLastTxCauseCode Unsigned32, mscAtmIfUniSigLastTxDiagCode Hex, mscAtmIfUniSigLastRxCauseCode Unsigned32, mscAtmIfUniSigLastRxDiagCode Hex } mscAtmIfUniSigLastTxCauseCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages." ::= { mscAtmIfUniSigOperEntry 1 } mscAtmIfUniSigLastTxDiagCode OBJECT-TYPE SYNTAX Hex (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0." ::= { mscAtmIfUniSigOperEntry 2 } mscAtmIfUniSigLastRxCauseCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages." ::= { mscAtmIfUniSigOperEntry 3 } mscAtmIfUniSigLastRxDiagCode OBJECT-TYPE SYNTAX Hex (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0." ::= { mscAtmIfUniSigOperEntry 4 } mscAtmIfUniSigStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniSigStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the statistics associated with the AtmSignalling component." ::= { mscAtmIfUniSig 13 } mscAtmIfUniSigStatsEntry OBJECT-TYPE SYNTAX MscAtmIfUniSigStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniSigStatsTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniSigIndex } ::= { mscAtmIfUniSigStatsTable 1 } MscAtmIfUniSigStatsEntry ::= SEQUENCE { mscAtmIfUniSigCurrentConnections Counter32, mscAtmIfUniSigPeakConnections Gauge32, mscAtmIfUniSigSuccessfulConnections Counter32, mscAtmIfUniSigFailedConnections Counter32, mscAtmIfUniSigTxPdus Counter32, mscAtmIfUniSigRxPdus Counter32, mscAtmIfUniSigCurrentPmpConnections Gauge32, mscAtmIfUniSigPeakPmpConnections Gauge32, mscAtmIfUniSigSuccessfulPmpConnections Counter32, mscAtmIfUniSigFailedPmpConnections Counter32, mscAtmIfUniSigNewCurrentConnections Gauge32 } mscAtmIfUniSigCurrentConnections OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS obsolete DESCRIPTION "This attribute indicates the total number of currently active connections." ::= { mscAtmIfUniSigStatsEntry 1 } mscAtmIfUniSigPeakConnections OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections." ::= { mscAtmIfUniSigStatsEntry 2 } mscAtmIfUniSigSuccessfulConnections OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfUniSigStatsEntry 3 } mscAtmIfUniSigFailedConnections OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfUniSigStatsEntry 4 } mscAtmIfUniSigTxPdus OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfUniSigStatsEntry 5 } mscAtmIfUniSigRxPdus OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfUniSigStatsEntry 6 } mscAtmIfUniSigCurrentPmpConnections OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of currently active point-to- multipoint connections." ::= { mscAtmIfUniSigStatsEntry 7 } mscAtmIfUniSigPeakPmpConnections OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the high water mark of active point-to- multipoint connections." ::= { mscAtmIfUniSigStatsEntry 8 } mscAtmIfUniSigSuccessfulPmpConnections OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfUniSigStatsEntry 9 } mscAtmIfUniSigFailedPmpConnections OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfUniSigStatsEntry 10 } mscAtmIfUniSigNewCurrentConnections OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections." ::= { mscAtmIfUniSigStatsEntry 11 } -- AtmIf/n Uni Sig VirtualChannelDescriptor -- AtmIf/n Uni Ilmi VirtualChannelDescriptor -- AtmIf/n Iisp Sig VirtualChannelDescriptor -- AtmIf/n Pnni Sig VirtualChannelDescriptor -- AtmIf/n Pnni Rcc VirtualChannelDescriptor -- AtmIf/n Vpt/m Uni Sig VirtualChannelDescriptor -- AtmIf/n Vpt/m Iisp Sig VirtualChannelDescriptor -- AtmIf/n Vpt/m Pnni Sig VirtualChannelDescriptor -- AtmIf/n Vpt/m Pnni Rcc VirtualChannelDescriptor -- -- This component contains the provisionable traffic parameters for a -- control channel (Sig, Ilmi or Rcc component). mscAtmIfUniSigVcd OBJECT IDENTIFIER ::= { mscAtmIfUniSig 2 } mscAtmIfUniSigVcdRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniSigVcdRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfUniSigVcd components." ::= { mscAtmIfUniSigVcd 1 } mscAtmIfUniSigVcdRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfUniSigVcdRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfUniSigVcd component." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniSigIndex, mscAtmIfUniSigVcdIndex } ::= { mscAtmIfUniSigVcdRowStatusTable 1 } MscAtmIfUniSigVcdRowStatusEntry ::= SEQUENCE { mscAtmIfUniSigVcdRowStatus RowStatus, mscAtmIfUniSigVcdComponentName DisplayString, mscAtmIfUniSigVcdStorageType StorageType, mscAtmIfUniSigVcdIndex NonReplicated } mscAtmIfUniSigVcdRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfUniSigVcd components. These components can be added and deleted." ::= { mscAtmIfUniSigVcdRowStatusEntry 1 } mscAtmIfUniSigVcdComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfUniSigVcdRowStatusEntry 2 } mscAtmIfUniSigVcdStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfUniSigVcd tables." ::= { mscAtmIfUniSigVcdRowStatusEntry 4 } mscAtmIfUniSigVcdIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfUniSigVcd tables." ::= { mscAtmIfUniSigVcdRowStatusEntry 10 } mscAtmIfUniSigVcdProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniSigVcdProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable traffic attributes for a control channel." ::= { mscAtmIfUniSigVcd 10 } mscAtmIfUniSigVcdProvEntry OBJECT-TYPE SYNTAX MscAtmIfUniSigVcdProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniSigVcdProvTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniSigIndex, mscAtmIfUniSigVcdIndex } ::= { mscAtmIfUniSigVcdProvTable 1 } MscAtmIfUniSigVcdProvEntry ::= SEQUENCE { mscAtmIfUniSigVcdTrafficDescType INTEGER, mscAtmIfUniSigVcdAtmServiceCategory INTEGER, mscAtmIfUniSigVcdWeight Unsigned32, mscAtmIfUniSigVcdQosClass INTEGER, mscAtmIfUniSigVcdTrafficShaping INTEGER, mscAtmIfUniSigVcdUnshapedTransmitQueueing INTEGER, mscAtmIfUniSigVcdUsageParameterControl INTEGER } mscAtmIfUniSigVcdTrafficDescType OBJECT-TYPE SYNTAX INTEGER { n3(3), n6(6), n7(7), n8(8) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute." DEFVAL { n6 } ::= { mscAtmIfUniSigVcdProvEntry 1 } mscAtmIfUniSigVcdAtmServiceCategory OBJECT-TYPE SYNTAX INTEGER { unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection." DEFVAL { rtVariableBitRate } ::= { mscAtmIfUniSigVcdProvEntry 3 } mscAtmIfUniSigVcdWeight OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4095 | 65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )" DEFVAL { 65535 } ::= { mscAtmIfUniSigVcdProvEntry 4 } mscAtmIfUniSigVcdQosClass OBJECT-TYPE SYNTAX INTEGER { n0(0), n1(1), n2(2), n3(3), n4(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters." DEFVAL { n2 } ::= { mscAtmIfUniSigVcdProvEntry 21 } mscAtmIfUniSigVcdTrafficShaping OBJECT-TYPE SYNTAX INTEGER { disabled(1), sameAsCa(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled." DEFVAL { disabled } ::= { mscAtmIfUniSigVcdProvEntry 50 } mscAtmIfUniSigVcdUnshapedTransmitQueueing OBJECT-TYPE SYNTAX INTEGER { common(1), sameAsCa(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used" DEFVAL { sameAsCa } ::= { mscAtmIfUniSigVcdProvEntry 60 } mscAtmIfUniSigVcdUsageParameterControl OBJECT-TYPE SYNTAX INTEGER { disabled(1), sameAsCa(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used" DEFVAL { disabled } ::= { mscAtmIfUniSigVcdProvEntry 70 } mscAtmIfUniSigVcdTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniSigVcdTdpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR." ::= { mscAtmIfUniSigVcd 387 } mscAtmIfUniSigVcdTdpEntry OBJECT-TYPE SYNTAX MscAtmIfUniSigVcdTdpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniSigVcdTdpTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniSigIndex, mscAtmIfUniSigVcdIndex, mscAtmIfUniSigVcdTdpIndex } ::= { mscAtmIfUniSigVcdTdpTable 1 } MscAtmIfUniSigVcdTdpEntry ::= SEQUENCE { mscAtmIfUniSigVcdTdpIndex Integer32, mscAtmIfUniSigVcdTdpValue Unsigned32 } mscAtmIfUniSigVcdTdpIndex OBJECT-TYPE SYNTAX Integer32 (1..5) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the mscAtmIfUniSigVcdTdpTable specific index for the mscAtmIfUniSigVcdTdpTable." ::= { mscAtmIfUniSigVcdTdpEntry 1 } mscAtmIfUniSigVcdTdpValue OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents an individual value for the mscAtmIfUniSigVcdTdpTable." ::= { mscAtmIfUniSigVcdTdpEntry 2 } -- AtmIf/n Iisp Address/address,type -- AtmIf/n Uni Address/address,type -- AtmIf/n Pnni Address/address,type -- AtmIf/n Vpt/m Iisp Address/address,type -- AtmIf/n Vpt/m Uni Address/address,type -- AtmIf/n Vpt/m Pnni Address/address,type -- -- This component represents an address (dynamic or static) -- associated with the interface. The index is a string of 1 to 40 hex -- digits or a single wildcard ('?'), and a type. The type identifies -- whether the Address component is for a primary, alternate, -- registered, or default address. -- -- The types primary and alternate are used for provisioned addresses. -- The type registered is used for dynamic addresses registered -- through ILMI. The type default is used for Soft PVP and Soft PVC -- addresses.Virtual interfaces do not have addresses of -- type default. -- -- The wildcard is only valid for provisioned addresses. If the address -- is a single wildcard, then that indicates that the interface supports -- all addresses. If there is no better match, then this interface may be -- chosen in the routing. If there is more than one interface with a -- single wildcard static address, then the choice is driven through a -- round robin algorithm. -- -- The round robin algorithm tries the primary routes and then the -- alternate routes if none of the primary routes succeed. -- If this node participates in a PNNI hierarchy, then a PnniInfo -- subcomponent can be provisioned under the AtmAddress -- component to specify the level to which this address will be -- advertised. mscAtmIfUniAddr OBJECT IDENTIFIER ::= { mscAtmIfUni 4 } mscAtmIfUniAddrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfUniAddr components." ::= { mscAtmIfUniAddr 1 } mscAtmIfUniAddrRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfUniAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfUniAddr component." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniAddrAddressIndex, mscAtmIfUniAddrAddressTypeIndex } ::= { mscAtmIfUniAddrRowStatusTable 1 } MscAtmIfUniAddrRowStatusEntry ::= SEQUENCE { mscAtmIfUniAddrRowStatus RowStatus, mscAtmIfUniAddrComponentName DisplayString, mscAtmIfUniAddrStorageType StorageType, mscAtmIfUniAddrAddressIndex AsciiStringIndex, mscAtmIfUniAddrAddressTypeIndex INTEGER } mscAtmIfUniAddrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfUniAddr components. These components can be added and deleted." ::= { mscAtmIfUniAddrRowStatusEntry 1 } mscAtmIfUniAddrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfUniAddrRowStatusEntry 2 } mscAtmIfUniAddrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfUniAddr tables." ::= { mscAtmIfUniAddrRowStatusEntry 4 } mscAtmIfUniAddrAddressIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..40)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscAtmIfUniAddr tables." ::= { mscAtmIfUniAddrRowStatusEntry 10 } mscAtmIfUniAddrAddressTypeIndex OBJECT-TYPE SYNTAX INTEGER { primary(0), alternate(1), registered(2), default(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscAtmIfUniAddr tables." ::= { mscAtmIfUniAddrRowStatusEntry 11 } mscAtmIfUniAddrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniAddrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the operational attributes for the Address component." ::= { mscAtmIfUniAddr 10 } mscAtmIfUniAddrOperEntry OBJECT-TYPE SYNTAX MscAtmIfUniAddrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniAddrOperTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniAddrAddressIndex, mscAtmIfUniAddrAddressTypeIndex } ::= { mscAtmIfUniAddrOperTable 1 } MscAtmIfUniAddrOperEntry ::= SEQUENCE { mscAtmIfUniAddrScope INTEGER, mscAtmIfUniAddrReachability INTEGER } mscAtmIfUniAddrScope OBJECT-TYPE SYNTAX INTEGER (-1..104) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1." ::= { mscAtmIfUniAddrOperEntry 1 } mscAtmIfUniAddrReachability OBJECT-TYPE SYNTAX INTEGER { internal(0), exterior(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain." ::= { mscAtmIfUniAddrOperEntry 2 } -- AtmIf/n Iisp Address/address,type TerminateSPvpAndSPvc -- AtmIf/n Uni Address/address,type TerminateSPvpAndSPvc -- AtmIf/n Pnni Address/address,type TerminateSPvpAndSPvc -- AtmIf/n Vpt/m Iisp Address/address,type TerminateSPvpAndSPvc -- AtmIf/n Vpt/m Uni Address/address,type TerminateSPvpAndSPvc -- AtmIf/n Vpt/m Pnni Address/address,type TerminateSPvpAndSPvc -- -- The presence of this subcomponent indicates that SPvp and SPvc -- call setups terminate at this node if the destination address of the -- SPVP or SPVC matches the Address instance. mscAtmIfUniAddrTermSP OBJECT IDENTIFIER ::= { mscAtmIfUniAddr 2 } mscAtmIfUniAddrTermSPRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniAddrTermSPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfUniAddrTermSP components." ::= { mscAtmIfUniAddrTermSP 1 } mscAtmIfUniAddrTermSPRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfUniAddrTermSPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfUniAddrTermSP component." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniAddrAddressIndex, mscAtmIfUniAddrAddressTypeIndex, mscAtmIfUniAddrTermSPIndex } ::= { mscAtmIfUniAddrTermSPRowStatusTable 1 } MscAtmIfUniAddrTermSPRowStatusEntry ::= SEQUENCE { mscAtmIfUniAddrTermSPRowStatus RowStatus, mscAtmIfUniAddrTermSPComponentName DisplayString, mscAtmIfUniAddrTermSPStorageType StorageType, mscAtmIfUniAddrTermSPIndex NonReplicated } mscAtmIfUniAddrTermSPRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfUniAddrTermSP components. These components can be added and deleted." ::= { mscAtmIfUniAddrTermSPRowStatusEntry 1 } mscAtmIfUniAddrTermSPComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfUniAddrTermSPRowStatusEntry 2 } mscAtmIfUniAddrTermSPStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfUniAddrTermSP tables." ::= { mscAtmIfUniAddrTermSPRowStatusEntry 4 } mscAtmIfUniAddrTermSPIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfUniAddrTermSP tables." ::= { mscAtmIfUniAddrTermSPRowStatusEntry 10 } -- AtmIf/n Iisp Addr/address,type PnniInfo -- AtmIf/n Uni Addr/address,type PnniInfo -- AtmIf/n Pnni Addr/address,type PnniInfo -- AtmIf/n Vpt/m Iisp Addr/address,type PnniInfo -- AtmIf/n Vpt/m Uni Addr/address,type PnniInfo -- AtmIf/n Vpt/m Pnni Addr/address,type PnniInfo -- -- This component contains provisioned information associated with -- the ATM address related to PNNI. This component appears only -- under provisioned Address components. mscAtmIfUniAddrPnniInfo OBJECT IDENTIFIER ::= { mscAtmIfUniAddr 3 } mscAtmIfUniAddrPnniInfoRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniAddrPnniInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfUniAddrPnniInfo components." ::= { mscAtmIfUniAddrPnniInfo 1 } mscAtmIfUniAddrPnniInfoRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfUniAddrPnniInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfUniAddrPnniInfo component." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniAddrAddressIndex, mscAtmIfUniAddrAddressTypeIndex, mscAtmIfUniAddrPnniInfoIndex } ::= { mscAtmIfUniAddrPnniInfoRowStatusTable 1 } MscAtmIfUniAddrPnniInfoRowStatusEntry ::= SEQUENCE { mscAtmIfUniAddrPnniInfoRowStatus RowStatus, mscAtmIfUniAddrPnniInfoComponentName DisplayString, mscAtmIfUniAddrPnniInfoStorageType StorageType, mscAtmIfUniAddrPnniInfoIndex NonReplicated } mscAtmIfUniAddrPnniInfoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfUniAddrPnniInfo components. These components can be added and deleted." ::= { mscAtmIfUniAddrPnniInfoRowStatusEntry 1 } mscAtmIfUniAddrPnniInfoComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfUniAddrPnniInfoRowStatusEntry 2 } mscAtmIfUniAddrPnniInfoStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfUniAddrPnniInfo tables." ::= { mscAtmIfUniAddrPnniInfoRowStatusEntry 4 } mscAtmIfUniAddrPnniInfoIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfUniAddrPnniInfo tables." ::= { mscAtmIfUniAddrPnniInfoRowStatusEntry 10 } mscAtmIfUniAddrPnniInfoProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniAddrPnniInfoProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component." ::= { mscAtmIfUniAddrPnniInfo 10 } mscAtmIfUniAddrPnniInfoProvEntry OBJECT-TYPE SYNTAX MscAtmIfUniAddrPnniInfoProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniAddrPnniInfoProvTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniAddrAddressIndex, mscAtmIfUniAddrAddressTypeIndex, mscAtmIfUniAddrPnniInfoIndex } ::= { mscAtmIfUniAddrPnniInfoProvTable 1 } MscAtmIfUniAddrPnniInfoProvEntry ::= SEQUENCE { mscAtmIfUniAddrPnniInfoScope INTEGER, mscAtmIfUniAddrPnniInfoReachability INTEGER } mscAtmIfUniAddrPnniInfoScope OBJECT-TYPE SYNTAX INTEGER (-1..104) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain." DEFVAL { -1 } ::= { mscAtmIfUniAddrPnniInfoProvEntry 1 } mscAtmIfUniAddrPnniInfoReachability OBJECT-TYPE SYNTAX INTEGER { internal(0), exterior(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain." DEFVAL { internal } ::= { mscAtmIfUniAddrPnniInfoProvEntry 2 } -- AtmIf/n Uni CallingAddressScreening -- AtmIf/n Iisp CallingAddressScreening -- This component represents the screening of incoming ATM SVC -- call requests against provisioned ATM calling addresses (that is, -- screening SVC calls coming from specific addresses). If this -- component is not provisioned, all call requests are accepted and no -- calling address screening takes place. mscAtmIfUniCallingAScr OBJECT IDENTIFIER ::= { mscAtmIfUni 5 } mscAtmIfUniCallingAScrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniCallingAScrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfUniCallingAScr components." ::= { mscAtmIfUniCallingAScr 1 } mscAtmIfUniCallingAScrRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfUniCallingAScrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfUniCallingAScr component." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniCallingAScrIndex } ::= { mscAtmIfUniCallingAScrRowStatusTable 1 } MscAtmIfUniCallingAScrRowStatusEntry ::= SEQUENCE { mscAtmIfUniCallingAScrRowStatus RowStatus, mscAtmIfUniCallingAScrComponentName DisplayString, mscAtmIfUniCallingAScrStorageType StorageType, mscAtmIfUniCallingAScrIndex NonReplicated } mscAtmIfUniCallingAScrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfUniCallingAScr components. These components can be added and deleted." ::= { mscAtmIfUniCallingAScrRowStatusEntry 1 } mscAtmIfUniCallingAScrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfUniCallingAScrRowStatusEntry 2 } mscAtmIfUniCallingAScrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfUniCallingAScr tables." ::= { mscAtmIfUniCallingAScrRowStatusEntry 4 } mscAtmIfUniCallingAScrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfUniCallingAScr tables." ::= { mscAtmIfUniCallingAScrRowStatusEntry 10 } mscAtmIfUniCallingAScrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniCallingAScrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the provisionable attributes for the CallingAScr component." ::= { mscAtmIfUniCallingAScr 10 } mscAtmIfUniCallingAScrProvEntry OBJECT-TYPE SYNTAX MscAtmIfUniCallingAScrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniCallingAScrProvTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniCallingAScrIndex } ::= { mscAtmIfUniCallingAScrProvTable 1 } MscAtmIfUniCallingAScrProvEntry ::= SEQUENCE { mscAtmIfUniCallingAScrAdminStatus INTEGER, mscAtmIfUniCallingAScrDefaultInsertionAddress HexString } mscAtmIfUniCallingAScrAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the calling address screening feature is enabled or disabled. If enabled, incoming SVC calls are screened against provisioned addresses. If enabled and the calling address in the ATM SVC call request is provisioned to be accepted, the call is accepted or rejected according to the action specified for that address. If the value is enabled, and the calling address in the address request is not provisioned, the call is rejected If the value is disabled, no calling address screening is performed." DEFVAL { disabled } ::= { mscAtmIfUniCallingAScrProvEntry 1 } mscAtmIfUniCallingAScrDefaultInsertionAddress OBJECT-TYPE SYNTAX HexString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the address to be inserted into the SVC connection request if adminStatus is enabled and the connection request does not contain a calling address. If the adminStatus attribute is enabled and this attribute is empty, all incoming SVC calls which do not contain a calling address are rejected." DEFVAL { ''H } -- "" ::= { mscAtmIfUniCallingAScrProvEntry 2 } mscAtmIfUniCallingAScrStatTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniCallingAScrStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains statistics related to the incoming SVC call requests received while the adminStatus attribute is set to enabled." ::= { mscAtmIfUniCallingAScr 11 } mscAtmIfUniCallingAScrStatEntry OBJECT-TYPE SYNTAX MscAtmIfUniCallingAScrStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniCallingAScrStatTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniCallingAScrIndex } ::= { mscAtmIfUniCallingAScrStatTable 1 } MscAtmIfUniCallingAScrStatEntry ::= SEQUENCE { mscAtmIfUniCallingAScrAcceptedCalls Counter32, mscAtmIfUniCallingAScrRejectedCalls Counter32, mscAtmIfUniCallingAScrUnmatchedCalls Counter32 } mscAtmIfUniCallingAScrAcceptedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the incoming SVC calls which were accepted because the address specified in the call request matched a provisioned ATM address and the associated action was accept. When the counter exceeds the maximum, it wraps to 0." ::= { mscAtmIfUniCallingAScrStatEntry 1 } mscAtmIfUniCallingAScrRejectedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the incoming SVC calls which were rejected because the address specified in the call request matched a provisioned ATM address, but the associated action was reject. When the counter exceeds the maximum, it wraps to 0." ::= { mscAtmIfUniCallingAScrStatEntry 2 } mscAtmIfUniCallingAScrUnmatchedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the incoming SVC calls which were rejected because none of the provisioned ATM addresses matched the applicable address in the incoming SVC call request. When the counter exceeds the maximum, it wraps to 0." ::= { mscAtmIfUniCallingAScrStatEntry 3 } -- AtmIf/n Uni CallingAScr Address/addr,action -- AtmIf/n Iisp CallingAScr Address/addr,action -- AtmIf/n Uni CalledAScr Address/addr,action -- AtmIf/n Iisp CalledAScr Address/addr,action -- This component specifies a calling (or called) address with an -- action to accept or reject a connection request which contains a -- matching calling (or called) address. -- For the Calling Address Screening feature, if the specified action is -- accept, any call whose calling address matches that address is -- accepted. If the specified action is reject, any call whose calling -- address matches that address is rejected. -- For the Called Address Screening feature, if the specified action is -- accept, any call whose called address matches that address, is -- accepted. If the specified action is reject, any call whose called -- address matches that address is rejected. -- For both features, the incoming SVC call request is rejected if the -- address is not provisioned and the feature is enabled. mscAtmIfUniCallingAScrAddr OBJECT IDENTIFIER ::= { mscAtmIfUniCallingAScr 2 } mscAtmIfUniCallingAScrAddrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniCallingAScrAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfUniCallingAScrAddr components." ::= { mscAtmIfUniCallingAScrAddr 1 } mscAtmIfUniCallingAScrAddrRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfUniCallingAScrAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfUniCallingAScrAddr component." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniCallingAScrIndex, mscAtmIfUniCallingAScrAddrAddressIndex, mscAtmIfUniCallingAScrAddrAddressActionIndex } ::= { mscAtmIfUniCallingAScrAddrRowStatusTable 1 } MscAtmIfUniCallingAScrAddrRowStatusEntry ::= SEQUENCE { mscAtmIfUniCallingAScrAddrRowStatus RowStatus, mscAtmIfUniCallingAScrAddrComponentName DisplayString, mscAtmIfUniCallingAScrAddrStorageType StorageType, mscAtmIfUniCallingAScrAddrAddressIndex AsciiStringIndex, mscAtmIfUniCallingAScrAddrAddressActionIndex INTEGER } mscAtmIfUniCallingAScrAddrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfUniCallingAScrAddr components. These components can be added and deleted." ::= { mscAtmIfUniCallingAScrAddrRowStatusEntry 1 } mscAtmIfUniCallingAScrAddrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfUniCallingAScrAddrRowStatusEntry 2 } mscAtmIfUniCallingAScrAddrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfUniCallingAScrAddr tables." ::= { mscAtmIfUniCallingAScrAddrRowStatusEntry 4 } mscAtmIfUniCallingAScrAddrAddressIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..40)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscAtmIfUniCallingAScrAddr tables." ::= { mscAtmIfUniCallingAScrAddrRowStatusEntry 10 } mscAtmIfUniCallingAScrAddrAddressActionIndex OBJECT-TYPE SYNTAX INTEGER { accept(0), reject(1) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscAtmIfUniCallingAScrAddr tables." ::= { mscAtmIfUniCallingAScrAddrRowStatusEntry 11 } -- AtmIf/n Uni CalledAddressScreening -- AtmIf/n Iisp CalledAddressScreening -- This component represents the screening of incoming ATM SVC -- call requests against provisioned ATM called addresses (that is, -- going to specific destinations). If this component is not provisioned, -- all call requests are accepted and no called address screening takes -- place. mscAtmIfUniCalledAScr OBJECT IDENTIFIER ::= { mscAtmIfUni 6 } mscAtmIfUniCalledAScrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniCalledAScrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfUniCalledAScr components." ::= { mscAtmIfUniCalledAScr 1 } mscAtmIfUniCalledAScrRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfUniCalledAScrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfUniCalledAScr component." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniCalledAScrIndex } ::= { mscAtmIfUniCalledAScrRowStatusTable 1 } MscAtmIfUniCalledAScrRowStatusEntry ::= SEQUENCE { mscAtmIfUniCalledAScrRowStatus RowStatus, mscAtmIfUniCalledAScrComponentName DisplayString, mscAtmIfUniCalledAScrStorageType StorageType, mscAtmIfUniCalledAScrIndex NonReplicated } mscAtmIfUniCalledAScrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfUniCalledAScr components. These components can be added and deleted." ::= { mscAtmIfUniCalledAScrRowStatusEntry 1 } mscAtmIfUniCalledAScrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfUniCalledAScrRowStatusEntry 2 } mscAtmIfUniCalledAScrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfUniCalledAScr tables." ::= { mscAtmIfUniCalledAScrRowStatusEntry 4 } mscAtmIfUniCalledAScrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfUniCalledAScr tables." ::= { mscAtmIfUniCalledAScrRowStatusEntry 10 } mscAtmIfUniCalledAScrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniCalledAScrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the provisionable attributes for the CalledAScr component." ::= { mscAtmIfUniCalledAScr 10 } mscAtmIfUniCalledAScrProvEntry OBJECT-TYPE SYNTAX MscAtmIfUniCalledAScrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniCalledAScrProvTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniCalledAScrIndex } ::= { mscAtmIfUniCalledAScrProvTable 1 } MscAtmIfUniCalledAScrProvEntry ::= SEQUENCE { mscAtmIfUniCalledAScrAdminStatus INTEGER } mscAtmIfUniCalledAScrAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the called address screening feature is enabled or disabled. If the value is enabled, incoming SVC calls will be screened against provisioned called addresses. If the value is enabled and the called address in the ATM SVC call request has been provisioned, the call is accepted or rejected according to the action specified for that address. If the value is enabled and the called address in the call request is not provisioned, the call is rejected. If the value is disabled, no called address screening is performed." DEFVAL { disabled } ::= { mscAtmIfUniCalledAScrProvEntry 1 } mscAtmIfUniCalledAScrStatTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniCalledAScrStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains statistics related to the incoming SVC call requests received while the adminStatus attribute is set to enabled." ::= { mscAtmIfUniCalledAScr 11 } mscAtmIfUniCalledAScrStatEntry OBJECT-TYPE SYNTAX MscAtmIfUniCalledAScrStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfUniCalledAScrStatTable." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniCalledAScrIndex } ::= { mscAtmIfUniCalledAScrStatTable 1 } MscAtmIfUniCalledAScrStatEntry ::= SEQUENCE { mscAtmIfUniCalledAScrAcceptedCalls Counter32, mscAtmIfUniCalledAScrRejectedCalls Counter32, mscAtmIfUniCalledAScrUnmatchedCalls Counter32 } mscAtmIfUniCalledAScrAcceptedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the incoming SVC calls which were accepted because the address specified in the call request matched a provisioned ATM address and the associated action was accept. When the counter exceeds the maximum, it wraps to 0." ::= { mscAtmIfUniCalledAScrStatEntry 1 } mscAtmIfUniCalledAScrRejectedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the incoming SVC calls which were rejected because the address specified in the call request matched a provisioned ATM address, but the associated action was reject. When the counter exceeds the maximum, it wraps to 0." ::= { mscAtmIfUniCalledAScrStatEntry 2 } mscAtmIfUniCalledAScrUnmatchedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the incoming SVC calls which were rejected because none of the provisioned ATM addresses matched the applicable address in the incoming SVC call request. When the counter exceeds the maximum, it wraps to 0." ::= { mscAtmIfUniCalledAScrStatEntry 3 } -- AtmIf/n Uni CallingAScr Address/addr,action -- AtmIf/n Iisp CallingAScr Address/addr,action -- AtmIf/n Uni CalledAScr Address/addr,action -- AtmIf/n Iisp CalledAScr Address/addr,action -- This component specifies a calling (or called) address with an -- action to accept or reject a connection request which contains a -- matching calling (or called) address. -- For the Calling Address Screening feature, if the specified action is -- accept, any call whose calling address matches that address is -- accepted. If the specified action is reject, any call whose calling -- address matches that address is rejected. -- For the Called Address Screening feature, if the specified action is -- accept, any call whose called address matches that address, is -- accepted. If the specified action is reject, any call whose called -- address matches that address is rejected. -- For both features, the incoming SVC call request is rejected if the -- address is not provisioned and the feature is enabled. mscAtmIfUniCalledAScrAddr OBJECT IDENTIFIER ::= { mscAtmIfUniCalledAScr 2 } mscAtmIfUniCalledAScrAddrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfUniCalledAScrAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfUniCalledAScrAddr components." ::= { mscAtmIfUniCalledAScrAddr 1 } mscAtmIfUniCalledAScrAddrRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfUniCalledAScrAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfUniCalledAScrAddr component." INDEX { mscAtmIfIndex, mscAtmIfUniIndex, mscAtmIfUniCalledAScrIndex, mscAtmIfUniCalledAScrAddrAddressIndex, mscAtmIfUniCalledAScrAddrAddressActionIndex } ::= { mscAtmIfUniCalledAScrAddrRowStatusTable 1 } MscAtmIfUniCalledAScrAddrRowStatusEntry ::= SEQUENCE { mscAtmIfUniCalledAScrAddrRowStatus RowStatus, mscAtmIfUniCalledAScrAddrComponentName DisplayString, mscAtmIfUniCalledAScrAddrStorageType StorageType, mscAtmIfUniCalledAScrAddrAddressIndex AsciiStringIndex, mscAtmIfUniCalledAScrAddrAddressActionIndex INTEGER } mscAtmIfUniCalledAScrAddrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfUniCalledAScrAddr components. These components can be added and deleted." ::= { mscAtmIfUniCalledAScrAddrRowStatusEntry 1 } mscAtmIfUniCalledAScrAddrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfUniCalledAScrAddrRowStatusEntry 2 } mscAtmIfUniCalledAScrAddrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfUniCalledAScrAddr tables." ::= { mscAtmIfUniCalledAScrAddrRowStatusEntry 4 } mscAtmIfUniCalledAScrAddrAddressIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..40)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscAtmIfUniCalledAScrAddr tables." ::= { mscAtmIfUniCalledAScrAddrRowStatusEntry 10 } mscAtmIfUniCalledAScrAddrAddressActionIndex OBJECT-TYPE SYNTAX INTEGER { accept(0), reject(1) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscAtmIfUniCalledAScrAddr tables." ::= { mscAtmIfUniCalledAScrAddrRowStatusEntry 11 } -- AtmIf/n VirtualPathTerminator/m Uni -- This component represents a virtual ATM UNI interface. If this -- component is provisioned, neither an Iisp component, nor a Pnni -- component can be provisioned under the same Vpt component. If -- this component is deleted, then all associated Vcc components are -- deleted. mscAtmIfVptUni OBJECT IDENTIFIER ::= { mscAtmIfVpt 8 } mscAtmIfVptUniRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfVptUni components." ::= { mscAtmIfVptUni 1 } mscAtmIfVptUniRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfVptUni component." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex } ::= { mscAtmIfVptUniRowStatusTable 1 } MscAtmIfVptUniRowStatusEntry ::= SEQUENCE { mscAtmIfVptUniRowStatus RowStatus, mscAtmIfVptUniComponentName DisplayString, mscAtmIfVptUniStorageType StorageType, mscAtmIfVptUniIndex NonReplicated } mscAtmIfVptUniRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfVptUni components. These components can be added and deleted." ::= { mscAtmIfVptUniRowStatusEntry 1 } mscAtmIfVptUniComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfVptUniRowStatusEntry 2 } mscAtmIfVptUniStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfVptUni tables." ::= { mscAtmIfVptUniRowStatusEntry 4 } mscAtmIfVptUniIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfVptUni tables." ::= { mscAtmIfVptUniRowStatusEntry 10 } mscAtmIfVptUniProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the Uni component." ::= { mscAtmIfVptUni 10 } mscAtmIfVptUniProvEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniProvTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex } ::= { mscAtmIfVptUniProvTable 1 } MscAtmIfVptUniProvEntry ::= SEQUENCE { mscAtmIfVptUniVersion INTEGER, mscAtmIfVptUniSide INTEGER, mscAtmIfVptUniSoftPvcRetryPeriod Unsigned32, mscAtmIfVptUniSoftPvpAndPvcRetryPeriod Unsigned32, mscAtmIfVptUniSoftPvpAndPvcHoldOffTime Unsigned32, mscAtmIfVptUniLoopPrevention INTEGER } mscAtmIfVptUniVersion OBJECT-TYPE SYNTAX INTEGER { atmForum30(0), atmForum31(1), atmForum40(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies which specification the UNI complies with. The options are ATM FORUM 3.0, ATM FORUM 3.1 or ATM FORUM 4.0. If this attribute is changed then all switched Vcc components in this interface are cleared due to the fact that the two versions are incompatible." DEFVAL { atmForum40 } ::= { mscAtmIfVptUniProvEntry 1 } mscAtmIfVptUniSide OBJECT-TYPE SYNTAX INTEGER { network(0), user(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates which side the interface is, user or network." DEFVAL { network } ::= { mscAtmIfVptUniProvEntry 2 } mscAtmIfVptUniSoftPvcRetryPeriod OBJECT-TYPE SYNTAX Unsigned32 (20..999999) ACCESS read-write STATUS obsolete DESCRIPTION "This attribute represents the time in seconds to wait between call set up retries. The resolution is to the nearest 10 seconds. This attribute has been obsoleted and is replaced by the softPvpAndPvcRetryPeriod attribute." DEFVAL { 60 } ::= { mscAtmIfVptUniProvEntry 3 } mscAtmIfVptUniSoftPvpAndPvcRetryPeriod OBJECT-TYPE SYNTAX Unsigned32 (20..999999) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute represents the time in seconds to wait between soft PVP or soft PVC call setup retries. The resolution is to the nearest 10 seconds." DEFVAL { 60 } ::= { mscAtmIfVptUniProvEntry 4 } mscAtmIfVptUniSoftPvpAndPvcHoldOffTime OBJECT-TYPE SYNTAX Unsigned32 (0 | 50..20000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies how long to hold off retries following a release or the connection. The resolution is to the nearest 50 ms." DEFVAL { 0 } ::= { mscAtmIfVptUniProvEntry 5 } mscAtmIfVptUniLoopPrevention OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether loop prevention is in effect on this interface. When the value is enabled, incoming calls on this interface cannot be routed back out the same interface. When the value is disabled, routing of incoming calls back out the same interface is permitted. The recommended value is enabled. The value disabled should only be used if routing of incoming calls back out over this interface is actually required. As an example, the value disabled might be needed if the interface is connected to an end-user multiplexing device which has no routing capability. Note that setting the value to enabled prevents only routing loops which involve two network nodes." DEFVAL { enabled } ::= { mscAtmIfVptUniProvEntry 6 } mscAtmIfVptUniAcctOptTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniAcctOptEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for accounting." ::= { mscAtmIfVptUni 11 } mscAtmIfVptUniAcctOptEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniAcctOptEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniAcctOptTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex } ::= { mscAtmIfVptUniAcctOptTable 1 } MscAtmIfVptUniAcctOptEntry ::= SEQUENCE { mscAtmIfVptUniAccountCollection OCTET STRING, mscAtmIfVptUniAccountConnectionType INTEGER, mscAtmIfVptUniAccountClass Unsigned32, mscAtmIfVptUniServiceExchange Unsigned32 } mscAtmIfVptUniAccountCollection OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit or force. If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts). If none of the reasons is present, then accounting will be suppressed. The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate. Description of bits: bill(0) test(1) study(2) audit(3) force(4)" ::= { mscAtmIfVptUniAcctOptEntry 1 } mscAtmIfVptUniAccountConnectionType OBJECT-TYPE SYNTAX INTEGER { origTerm(0), intermediate(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether accounting records generated by this interface should be marked as originating, terminating or intermediate. This attribute, in combination with the direction of the call, determines the value of attribute connPointType of the accounting record and may be used by downstream accounting processes to correlate the records. If the value is origTerm then records generated for incoming calls will be marked as originating and records generated for outgoing calls will be marked as terminating. If the value is intermediate then records generated for all calls will be marked as intermediate." DEFVAL { origTerm } ::= { mscAtmIfVptUniAcctOptEntry 2 } mscAtmIfVptUniAccountClass OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the accounting class associated with the interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingServiceType or calledServiceType as appropriate." DEFVAL { 0 } ::= { mscAtmIfVptUniAcctOptEntry 3 } mscAtmIfVptUniServiceExchange OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the data service exchange associated with this interface. Its meaning is determined by the network operator. Its value is simply recorded in the accounting records generated by this interface, in the attribute callingDse or calledDse as appropriate." DEFVAL { 0 } ::= { mscAtmIfVptUniAcctOptEntry 4 } mscAtmIfVptUniVProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniVProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the Uni component which are specific to virtual UNI interfaces." ::= { mscAtmIfVptUni 12 } mscAtmIfVptUniVProvEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniVProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniVProvTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex } ::= { mscAtmIfVptUniVProvTable 1 } MscAtmIfVptUniVProvEntry ::= SEQUENCE { mscAtmIfVptUniVpci Unsigned32 } mscAtmIfVptUniVpci OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Virtual Path Connection Identifier (VPCI) to be used between this signalling entity and its peer. The VPCI of the peer virtual UNI must have the same value for switched connections to be set up across the interface." DEFVAL { 0 } ::= { mscAtmIfVptUniVProvEntry 1 } -- AtmIf/n Iisp Signalling -- AtmIf/n Uni Signalling -- AtmIf/n Pnni Signalling -- AtmIf/n Vpt/m Iisp Signalling -- AtmIf/n Vpt/m Uni Signalling -- AtmIf/n Vpt/m Pnni Signalling -- -- This component represents the signalling entities for the interface. mscAtmIfVptUniSig OBJECT IDENTIFIER ::= { mscAtmIfVptUni 2 } mscAtmIfVptUniSigRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniSigRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfVptUniSig components." ::= { mscAtmIfVptUniSig 1 } mscAtmIfVptUniSigRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniSigRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfVptUniSig component." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniSigIndex } ::= { mscAtmIfVptUniSigRowStatusTable 1 } MscAtmIfVptUniSigRowStatusEntry ::= SEQUENCE { mscAtmIfVptUniSigRowStatus RowStatus, mscAtmIfVptUniSigComponentName DisplayString, mscAtmIfVptUniSigStorageType StorageType, mscAtmIfVptUniSigIndex NonReplicated } mscAtmIfVptUniSigRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfVptUniSig components. These components cannot be added nor deleted." ::= { mscAtmIfVptUniSigRowStatusEntry 1 } mscAtmIfVptUniSigComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfVptUniSigRowStatusEntry 2 } mscAtmIfVptUniSigStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfVptUniSig tables." ::= { mscAtmIfVptUniSigRowStatusEntry 4 } mscAtmIfVptUniSigIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfVptUniSig tables." ::= { mscAtmIfVptUniSigRowStatusEntry 10 } mscAtmIfVptUniSigProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniSigProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the provisionable attributes for the Signalling component." ::= { mscAtmIfVptUniSig 10 } mscAtmIfVptUniSigProvEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniSigProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniSigProvTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniSigIndex } ::= { mscAtmIfVptUniSigProvTable 1 } MscAtmIfVptUniSigProvEntry ::= SEQUENCE { mscAtmIfVptUniSigVci Unsigned32, mscAtmIfVptUniSigAddressConversion INTEGER, mscAtmIfVptUniSigOperatingMode INTEGER } mscAtmIfVptUniSigVci OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the signalling channel number." DEFVAL { 5 } ::= { mscAtmIfVptUniSigProvEntry 1 } mscAtmIfVptUniSigAddressConversion OBJECT-TYPE SYNTAX INTEGER { none(0), nativeE164(1), nsap(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the address conversion on the outgoing signalling PDUs. The options are none, nativeE164, or nsap. The none option is the default and if this option is chosen then nothing is done to the address information element (IE) in the outgoing signalling message. If nativeE164 option is chosen, then only NSAP encapsulated E.164 addresses with zeros in the ESI are converted to native E.164 format in the outgoing signalling message. If the NSAP address is not encapsulated E.164 or the ESI field is not zeros and the nativeE164 option is chosen, then the call is cleared. If the nsap option is chosen, then native E.164 addresses are converted to NSAP E.164 with zeros in the ESI field; otherwise the address is in NSAP format and is not changed." DEFVAL { none } ::= { mscAtmIfVptUniSigProvEntry 2 } mscAtmIfVptUniSigOperatingMode OBJECT-TYPE SYNTAX INTEGER { normal(0), provisionedOnly(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the operating mode of the signaling channel. provisionedOnly indicates that only SPVCs and SPVPs are supported on the interface and SVCs are not supported. This value is permitted only on UNI interfaces. normal indicates that SVCs, SPVCs, and SPVPs are supported on the interface." DEFVAL { normal } ::= { mscAtmIfVptUniSigProvEntry 3 } mscAtmIfVptUniSigStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniSigStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscAtmIfVptUniSig 11 } mscAtmIfVptUniSigStateEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniSigStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniSigStateTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniSigIndex } ::= { mscAtmIfVptUniSigStateTable 1 } MscAtmIfVptUniSigStateEntry ::= SEQUENCE { mscAtmIfVptUniSigAdminState INTEGER, mscAtmIfVptUniSigOperationalState INTEGER, mscAtmIfVptUniSigUsageState INTEGER } mscAtmIfVptUniSigAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscAtmIfVptUniSigStateEntry 1 } mscAtmIfVptUniSigOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscAtmIfVptUniSigStateEntry 2 } mscAtmIfVptUniSigUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscAtmIfVptUniSigStateEntry 3 } mscAtmIfVptUniSigOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniSigOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute contains the operational attributes for the AtmSignalling component." ::= { mscAtmIfVptUniSig 12 } mscAtmIfVptUniSigOperEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniSigOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniSigOperTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniSigIndex } ::= { mscAtmIfVptUniSigOperTable 1 } MscAtmIfVptUniSigOperEntry ::= SEQUENCE { mscAtmIfVptUniSigLastTxCauseCode Unsigned32, mscAtmIfVptUniSigLastTxDiagCode Hex, mscAtmIfVptUniSigLastRxCauseCode Unsigned32, mscAtmIfVptUniSigLastRxDiagCode Hex } mscAtmIfVptUniSigLastTxCauseCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the cause code in the last transmitted signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages." ::= { mscAtmIfVptUniSigOperEntry 1 } mscAtmIfVptUniSigLastTxDiagCode OBJECT-TYPE SYNTAX Hex (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0." ::= { mscAtmIfVptUniSigOperEntry 2 } mscAtmIfVptUniSigLastRxCauseCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the cause code in the last received signalling message that contains the CAUSE information element. The cause code is used to describe the reason for generating certain signalling messages." ::= { mscAtmIfVptUniSigOperEntry 3 } mscAtmIfVptUniSigLastRxDiagCode OBJECT-TYPE SYNTAX Hex (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the diagnostic code in the last received signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to 0." ::= { mscAtmIfVptUniSigOperEntry 4 } mscAtmIfVptUniSigStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniSigStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the statistics associated with the AtmSignalling component." ::= { mscAtmIfVptUniSig 13 } mscAtmIfVptUniSigStatsEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniSigStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniSigStatsTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniSigIndex } ::= { mscAtmIfVptUniSigStatsTable 1 } MscAtmIfVptUniSigStatsEntry ::= SEQUENCE { mscAtmIfVptUniSigCurrentConnections Counter32, mscAtmIfVptUniSigPeakConnections Gauge32, mscAtmIfVptUniSigSuccessfulConnections Counter32, mscAtmIfVptUniSigFailedConnections Counter32, mscAtmIfVptUniSigTxPdus Counter32, mscAtmIfVptUniSigRxPdus Counter32, mscAtmIfVptUniSigCurrentPmpConnections Gauge32, mscAtmIfVptUniSigPeakPmpConnections Gauge32, mscAtmIfVptUniSigSuccessfulPmpConnections Counter32, mscAtmIfVptUniSigFailedPmpConnections Counter32, mscAtmIfVptUniSigNewCurrentConnections Gauge32 } mscAtmIfVptUniSigCurrentConnections OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS obsolete DESCRIPTION "This attribute indicates the total number of currently active connections." ::= { mscAtmIfVptUniSigStatsEntry 1 } mscAtmIfVptUniSigPeakConnections OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the high water mark of active point-to- point and point-to-multipoint connections." ::= { mscAtmIfVptUniSigStatsEntry 2 } mscAtmIfVptUniSigSuccessfulConnections OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of switched point-to- point and point-to-multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfVptUniSigStatsEntry 3 } mscAtmIfVptUniSigFailedConnections OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of switched connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfVptUniSigStatsEntry 4 } mscAtmIfVptUniSigTxPdus OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of transmitted signalling PDUs.The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfVptUniSigStatsEntry 5 } mscAtmIfVptUniSigRxPdus OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of received signalling PDUs.The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfVptUniSigStatsEntry 6 } mscAtmIfVptUniSigCurrentPmpConnections OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of currently active point-to- multipoint connections." ::= { mscAtmIfVptUniSigStatsEntry 7 } mscAtmIfVptUniSigPeakPmpConnections OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the high water mark of active point-to- multipoint connections." ::= { mscAtmIfVptUniSigStatsEntry 8 } mscAtmIfVptUniSigSuccessfulPmpConnections OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of switched point-to- multipoint connections that were successfully established. The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfVptUniSigStatsEntry 9 } mscAtmIfVptUniSigFailedPmpConnections OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of switched point-to- multipoint connections that were not successfully established.The counter wraps to 0 when the maximum value is exceeded." ::= { mscAtmIfVptUniSigStatsEntry 10 } mscAtmIfVptUniSigNewCurrentConnections OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the total number of currently active point-to- point and point-to-multipoint connections." ::= { mscAtmIfVptUniSigStatsEntry 11 } -- AtmIf/n Uni Sig VirtualChannelDescriptor -- AtmIf/n Uni Ilmi VirtualChannelDescriptor -- AtmIf/n Iisp Sig VirtualChannelDescriptor -- AtmIf/n Pnni Sig VirtualChannelDescriptor -- AtmIf/n Pnni Rcc VirtualChannelDescriptor -- AtmIf/n Vpt/m Uni Sig VirtualChannelDescriptor -- AtmIf/n Vpt/m Iisp Sig VirtualChannelDescriptor -- AtmIf/n Vpt/m Pnni Sig VirtualChannelDescriptor -- AtmIf/n Vpt/m Pnni Rcc VirtualChannelDescriptor -- -- This component contains the provisionable traffic parameters for a -- control channel (Sig, Ilmi or Rcc component). mscAtmIfVptUniSigVcd OBJECT IDENTIFIER ::= { mscAtmIfVptUniSig 2 } mscAtmIfVptUniSigVcdRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniSigVcdRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfVptUniSigVcd components." ::= { mscAtmIfVptUniSigVcd 1 } mscAtmIfVptUniSigVcdRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniSigVcdRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfVptUniSigVcd component." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniSigIndex, mscAtmIfVptUniSigVcdIndex } ::= { mscAtmIfVptUniSigVcdRowStatusTable 1 } MscAtmIfVptUniSigVcdRowStatusEntry ::= SEQUENCE { mscAtmIfVptUniSigVcdRowStatus RowStatus, mscAtmIfVptUniSigVcdComponentName DisplayString, mscAtmIfVptUniSigVcdStorageType StorageType, mscAtmIfVptUniSigVcdIndex NonReplicated } mscAtmIfVptUniSigVcdRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfVptUniSigVcd components. These components can be added and deleted." ::= { mscAtmIfVptUniSigVcdRowStatusEntry 1 } mscAtmIfVptUniSigVcdComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfVptUniSigVcdRowStatusEntry 2 } mscAtmIfVptUniSigVcdStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfVptUniSigVcd tables." ::= { mscAtmIfVptUniSigVcdRowStatusEntry 4 } mscAtmIfVptUniSigVcdIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfVptUniSigVcd tables." ::= { mscAtmIfVptUniSigVcdRowStatusEntry 10 } mscAtmIfVptUniSigVcdProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniSigVcdProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable traffic attributes for a control channel." ::= { mscAtmIfVptUniSigVcd 10 } mscAtmIfVptUniSigVcdProvEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniSigVcdProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniSigVcdProvTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniSigIndex, mscAtmIfVptUniSigVcdIndex } ::= { mscAtmIfVptUniSigVcdProvTable 1 } MscAtmIfVptUniSigVcdProvEntry ::= SEQUENCE { mscAtmIfVptUniSigVcdTrafficDescType INTEGER, mscAtmIfVptUniSigVcdAtmServiceCategory INTEGER, mscAtmIfVptUniSigVcdWeight Unsigned32, mscAtmIfVptUniSigVcdQosClass INTEGER, mscAtmIfVptUniSigVcdTrafficShaping INTEGER, mscAtmIfVptUniSigVcdUnshapedTransmitQueueing INTEGER, mscAtmIfVptUniSigVcdUsageParameterControl INTEGER } mscAtmIfVptUniSigVcdTrafficDescType OBJECT-TYPE SYNTAX INTEGER { n3(3), n6(6), n7(7), n8(8) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the type of traffic management which is applied to both the transmit and receive direction of this connection as defined in the ATM Forum. The trafficDescType determines the number and meaning of the parameters in the trafficDescParm attribute." DEFVAL { n6 } ::= { mscAtmIfVptUniSigVcdProvEntry 1 } mscAtmIfVptUniSigVcdAtmServiceCategory OBJECT-TYPE SYNTAX INTEGER { unspecifiedBitRate(0), constantBitRate(1), rtVariableBitRate(2), nrtVariableBitRate(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the ATM service category for both directions of the connection. The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application. The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. Real time VBR service may support statistical multiplexing of real time sources. The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. Non-real time VBR service may support statistical multiplexing of connections. The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection." DEFVAL { rtVariableBitRate } ::= { mscAtmIfVptUniSigVcdProvEntry 3 } mscAtmIfVptUniSigVcdWeight OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4095 | 65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies an override for the weight of this unshaped connection. This attribute is ignored for shaped connections, for ABR connections, for connections on a CQC-based ATM FP and basic VPTs. When the value is set to sameAsCa, the weight is determined by the weight policy attribute under the CA service category component for all but standard VPT VCCs. For standard VPT VCCs, the weight is determined by the VCC's service category, when the value is set to sameAsCa. When this attribute is set to a value from 1 to 4095, that value is used for the weight policy of this connection relative to other connections. For all but standard VPT VCCs, weight policy determines the proportion of transit cell opportunities which are allocated to this connection, compared to other connections in the same service category. For standard VPT VCCs, weight policy determines the proportion of transmit cell opportunities which are allocated to this connection, compared to other connections associated with the VPT. When the value is set to upToQueueLimit, the weight policy is limited only by the txQueueLimit. VALUES ( 0 = upToQueueLimit 65535 = sameAsCa )" DEFVAL { 65535 } ::= { mscAtmIfVptUniSigVcdProvEntry 4 } mscAtmIfVptUniSigVcdQosClass OBJECT-TYPE SYNTAX INTEGER { n0(0), n1(1), n2(2), n3(3), n4(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the quality of service for both the forward and backward direction for this connection. Class 1 supports a QOS that meets Service Class A performance requirements (Circuit emulation, constant bit rate video). Class 2 supports a QOS that meets Service Class B performance requirements (Variable bit rate audio and video). Class 3 supports a QOS that meets Service Class C performance requirements (Connection-Oriented Data Transfer). Class 4 supports a QOS that meets Service Class D performance requirements (Connectionless Data Transfer). Class 0 is the unspecified bit rate QOS class; no objective is specified for the performance parameters." DEFVAL { n2 } ::= { mscAtmIfVptUniSigVcdProvEntry 21 } mscAtmIfVptUniSigVcdTrafficShaping OBJECT-TYPE SYNTAX INTEGER { disabled(1), sameAsCa(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface. When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components. When disabled is selected, traffic shaping for this connection is disabled." DEFVAL { disabled } ::= { mscAtmIfVptUniSigVcdProvEntry 50 } mscAtmIfVptUniSigVcdUnshapedTransmitQueueing OBJECT-TYPE SYNTAX INTEGER { common(1), sameAsCa(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute only applies when this connection is unshaped. This attribute specifies the transmit queueing method for this connection if it is unshaped. Refer to the unshapedTransmitQueueing attribute under the AtmIf CA service category subcomponent for more details on the meaning of this attribute. When this attribute is set to sameAsCa, the transmit queueing method for the connection is based on the unshapedTransmitQueueing attribute of the connection's service category component under the ConnectionAdministrator. When this attribute is set to common, transmit traffic on this unshaped connection is destined for the common queue. The value sameAsInterface is for migration from previous software releases, but should no longer be used" DEFVAL { sameAsCa } ::= { mscAtmIfVptUniSigVcdProvEntry 60 } mscAtmIfVptUniSigVcdUsageParameterControl OBJECT-TYPE SYNTAX INTEGER { disabled(1), sameAsCa(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface. When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component. When disabled is selected, UPC for this connection is disabled. The value sameAsInterface is for migration from previous software releases, but should no longer be used" DEFVAL { disabled } ::= { mscAtmIfVptUniSigVcdProvEntry 70 } mscAtmIfVptUniSigVcdTdpTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniSigVcdTdpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute is a vector of five traffic parameters whose meanings are defined by the trafficDescType attribute. The values of peak cell rate (PCR), sustained cell rate (SCR) and requested shaping rate are expressed in cell/s. Maximum burst size (MBS) is expressed in cells. CDVT is expressed in microseconds. The values of PCR, SCR, MBS and CDVT are used for connection admission control (CAC). The value of CDVT is only used for connections where the atmServiceCategory is constantBitRate. For all other values of atmServiceCategory, CDVT is ignored. The values of PCR, SCR and requested shaping rate are used to determine the actual shaping rate where traffic shaping is enabled. When trafficDescType is 3, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameter 1 must be non-zero. Parameters 2 and 3 must be zero. When trafficDescType is 6, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 and 1 traffic; parameter 3 represents the MBS for CLP equal to 0 and 1 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 7, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 with cell discard; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. When trafficDescType is 8, parameter 1 represents the PCR for CLP equal to 0 and 1 traffic; parameter 2 represents the SCR for CLP equal to 0 traffic with cell tagging; parameter 3 represents the MBS for CLP equal to 0 traffic; parameter 4 represents the CDVT; and parameter 5 represents the requested shaping rate. A non-zero value in parameter 5 overrides any value in parameter 1. This result is used as the PCR. Parameters 1, 2, and 3 must be non-zero. Parameter 1 must be greater than or equal to parameter 2. Parameter 5 must either be zero (unused) or greater than or equal to parameter 2. Whenever it is valid for PCR to be specified, parameter 5 may also be used to specify a requested shaping rate. A non-zero value in parameter 5 overrides the value in parameter 1 and is used as the peak cell rate in calculations of CAC and shaping rate. For trafficDescType 3 the traffic is shaped at the next rate less than the PCR. For trafficDescType 6, 7, and 8, the traffic is shaped at the highest available rate which is between PCR and SCR. However, if there is no available shaping rate between PCR and SCR, traffic is shaped at the next rate above the PCR." ::= { mscAtmIfVptUniSigVcd 387 } mscAtmIfVptUniSigVcdTdpEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniSigVcdTdpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniSigVcdTdpTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniSigIndex, mscAtmIfVptUniSigVcdIndex, mscAtmIfVptUniSigVcdTdpIndex } ::= { mscAtmIfVptUniSigVcdTdpTable 1 } MscAtmIfVptUniSigVcdTdpEntry ::= SEQUENCE { mscAtmIfVptUniSigVcdTdpIndex Integer32, mscAtmIfVptUniSigVcdTdpValue Unsigned32 } mscAtmIfVptUniSigVcdTdpIndex OBJECT-TYPE SYNTAX Integer32 (1..5) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the mscAtmIfVptUniSigVcdTdpTable specific index for the mscAtmIfVptUniSigVcdTdpTable." ::= { mscAtmIfVptUniSigVcdTdpEntry 1 } mscAtmIfVptUniSigVcdTdpValue OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents an individual value for the mscAtmIfVptUniSigVcdTdpTable." ::= { mscAtmIfVptUniSigVcdTdpEntry 2 } -- AtmIf/n Iisp Address/address,type -- AtmIf/n Uni Address/address,type -- AtmIf/n Pnni Address/address,type -- AtmIf/n Vpt/m Iisp Address/address,type -- AtmIf/n Vpt/m Uni Address/address,type -- AtmIf/n Vpt/m Pnni Address/address,type -- -- This component represents an address (dynamic or static) -- associated with the interface. The index is a string of 1 to 40 hex -- digits or a single wildcard ('?'), and a type. The type identifies -- whether the Address component is for a primary, alternate, -- registered, or default address. -- -- The types primary and alternate are used for provisioned addresses. -- The type registered is used for dynamic addresses registered -- through ILMI. The type default is used for Soft PVP and Soft PVC -- addresses.Virtual interfaces do not have addresses of -- type default. -- -- The wildcard is only valid for provisioned addresses. If the address -- is a single wildcard, then that indicates that the interface supports -- all addresses. If there is no better match, then this interface may be -- chosen in the routing. If there is more than one interface with a -- single wildcard static address, then the choice is driven through a -- round robin algorithm. -- -- The round robin algorithm tries the primary routes and then the -- alternate routes if none of the primary routes succeed. -- If this node participates in a PNNI hierarchy, then a PnniInfo -- subcomponent can be provisioned under the AtmAddress -- component to specify the level to which this address will be -- advertised. mscAtmIfVptUniAddr OBJECT IDENTIFIER ::= { mscAtmIfVptUni 3 } mscAtmIfVptUniAddrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfVptUniAddr components." ::= { mscAtmIfVptUniAddr 1 } mscAtmIfVptUniAddrRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfVptUniAddr component." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniAddrAddressIndex, mscAtmIfVptUniAddrAddressTypeIndex } ::= { mscAtmIfVptUniAddrRowStatusTable 1 } MscAtmIfVptUniAddrRowStatusEntry ::= SEQUENCE { mscAtmIfVptUniAddrRowStatus RowStatus, mscAtmIfVptUniAddrComponentName DisplayString, mscAtmIfVptUniAddrStorageType StorageType, mscAtmIfVptUniAddrAddressIndex AsciiStringIndex, mscAtmIfVptUniAddrAddressTypeIndex INTEGER } mscAtmIfVptUniAddrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfVptUniAddr components. These components can be added and deleted." ::= { mscAtmIfVptUniAddrRowStatusEntry 1 } mscAtmIfVptUniAddrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfVptUniAddrRowStatusEntry 2 } mscAtmIfVptUniAddrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfVptUniAddr tables." ::= { mscAtmIfVptUniAddrRowStatusEntry 4 } mscAtmIfVptUniAddrAddressIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..40)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscAtmIfVptUniAddr tables." ::= { mscAtmIfVptUniAddrRowStatusEntry 10 } mscAtmIfVptUniAddrAddressTypeIndex OBJECT-TYPE SYNTAX INTEGER { primary(0), alternate(1), registered(2), default(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscAtmIfVptUniAddr tables." ::= { mscAtmIfVptUniAddrRowStatusEntry 11 } mscAtmIfVptUniAddrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniAddrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the operational attributes for the Address component." ::= { mscAtmIfVptUniAddr 10 } mscAtmIfVptUniAddrOperEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniAddrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniAddrOperTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniAddrAddressIndex, mscAtmIfVptUniAddrAddressTypeIndex } ::= { mscAtmIfVptUniAddrOperTable 1 } MscAtmIfVptUniAddrOperEntry ::= SEQUENCE { mscAtmIfVptUniAddrScope INTEGER, mscAtmIfVptUniAddrReachability INTEGER } mscAtmIfVptUniAddrScope OBJECT-TYPE SYNTAX INTEGER (-1..104) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the scope of the ATM address, which is the highest level to which this address will be advertised in the PNNI hierarchy. If no PnniInfo subcomponent has been provisioned, then the scope will default to the level of this node in the PNNI hierarchy. If this node does not participate in a PNNI hierarchy, then this attribute will have the value of -1." ::= { mscAtmIfVptUniAddrOperEntry 1 } mscAtmIfVptUniAddrReachability OBJECT-TYPE SYNTAX INTEGER { internal(0), exterior(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain." ::= { mscAtmIfVptUniAddrOperEntry 2 } -- AtmIf/n Iisp Address/address,type TerminateSPvpAndSPvc -- AtmIf/n Uni Address/address,type TerminateSPvpAndSPvc -- AtmIf/n Pnni Address/address,type TerminateSPvpAndSPvc -- AtmIf/n Vpt/m Iisp Address/address,type TerminateSPvpAndSPvc -- AtmIf/n Vpt/m Uni Address/address,type TerminateSPvpAndSPvc -- AtmIf/n Vpt/m Pnni Address/address,type TerminateSPvpAndSPvc -- -- The presence of this subcomponent indicates that SPvp and SPvc -- call setups terminate at this node if the destination address of the -- SPVP or SPVC matches the Address instance. mscAtmIfVptUniAddrTermSP OBJECT IDENTIFIER ::= { mscAtmIfVptUniAddr 2 } mscAtmIfVptUniAddrTermSPRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniAddrTermSPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfVptUniAddrTermSP components." ::= { mscAtmIfVptUniAddrTermSP 1 } mscAtmIfVptUniAddrTermSPRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniAddrTermSPRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfVptUniAddrTermSP component." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniAddrAddressIndex, mscAtmIfVptUniAddrAddressTypeIndex, mscAtmIfVptUniAddrTermSPIndex } ::= { mscAtmIfVptUniAddrTermSPRowStatusTable 1 } MscAtmIfVptUniAddrTermSPRowStatusEntry ::= SEQUENCE { mscAtmIfVptUniAddrTermSPRowStatus RowStatus, mscAtmIfVptUniAddrTermSPComponentName DisplayString, mscAtmIfVptUniAddrTermSPStorageType StorageType, mscAtmIfVptUniAddrTermSPIndex NonReplicated } mscAtmIfVptUniAddrTermSPRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfVptUniAddrTermSP components. These components can be added and deleted." ::= { mscAtmIfVptUniAddrTermSPRowStatusEntry 1 } mscAtmIfVptUniAddrTermSPComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfVptUniAddrTermSPRowStatusEntry 2 } mscAtmIfVptUniAddrTermSPStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfVptUniAddrTermSP tables." ::= { mscAtmIfVptUniAddrTermSPRowStatusEntry 4 } mscAtmIfVptUniAddrTermSPIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfVptUniAddrTermSP tables." ::= { mscAtmIfVptUniAddrTermSPRowStatusEntry 10 } -- AtmIf/n Iisp Addr/address,type PnniInfo -- AtmIf/n Uni Addr/address,type PnniInfo -- AtmIf/n Pnni Addr/address,type PnniInfo -- AtmIf/n Vpt/m Iisp Addr/address,type PnniInfo -- AtmIf/n Vpt/m Uni Addr/address,type PnniInfo -- AtmIf/n Vpt/m Pnni Addr/address,type PnniInfo -- -- This component contains provisioned information associated with -- the ATM address related to PNNI. This component appears only -- under provisioned Address components. mscAtmIfVptUniAddrPnniInfo OBJECT IDENTIFIER ::= { mscAtmIfVptUniAddr 3 } mscAtmIfVptUniAddrPnniInfoRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniAddrPnniInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfVptUniAddrPnniInfo components." ::= { mscAtmIfVptUniAddrPnniInfo 1 } mscAtmIfVptUniAddrPnniInfoRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniAddrPnniInfoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfVptUniAddrPnniInfo component." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniAddrAddressIndex, mscAtmIfVptUniAddrAddressTypeIndex, mscAtmIfVptUniAddrPnniInfoIndex } ::= { mscAtmIfVptUniAddrPnniInfoRowStatusTable 1 } MscAtmIfVptUniAddrPnniInfoRowStatusEntry ::= SEQUENCE { mscAtmIfVptUniAddrPnniInfoRowStatus RowStatus, mscAtmIfVptUniAddrPnniInfoComponentName DisplayString, mscAtmIfVptUniAddrPnniInfoStorageType StorageType, mscAtmIfVptUniAddrPnniInfoIndex NonReplicated } mscAtmIfVptUniAddrPnniInfoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfVptUniAddrPnniInfo components. These components can be added and deleted." ::= { mscAtmIfVptUniAddrPnniInfoRowStatusEntry 1 } mscAtmIfVptUniAddrPnniInfoComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfVptUniAddrPnniInfoRowStatusEntry 2 } mscAtmIfVptUniAddrPnniInfoStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfVptUniAddrPnniInfo tables." ::= { mscAtmIfVptUniAddrPnniInfoRowStatusEntry 4 } mscAtmIfVptUniAddrPnniInfoIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfVptUniAddrPnniInfo tables." ::= { mscAtmIfVptUniAddrPnniInfoRowStatusEntry 10 } mscAtmIfVptUniAddrPnniInfoProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniAddrPnniInfoProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the provisioned attributes relating to PNNI for a PnniInfo component." ::= { mscAtmIfVptUniAddrPnniInfo 10 } mscAtmIfVptUniAddrPnniInfoProvEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniAddrPnniInfoProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniAddrPnniInfoProvTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniAddrAddressIndex, mscAtmIfVptUniAddrAddressTypeIndex, mscAtmIfVptUniAddrPnniInfoIndex } ::= { mscAtmIfVptUniAddrPnniInfoProvTable 1 } MscAtmIfVptUniAddrPnniInfoProvEntry ::= SEQUENCE { mscAtmIfVptUniAddrPnniInfoScope INTEGER, mscAtmIfVptUniAddrPnniInfoReachability INTEGER } mscAtmIfVptUniAddrPnniInfoScope OBJECT-TYPE SYNTAX INTEGER (-1..104) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the scope of the ATM address, which is the highest level up to which this address will be advertised in the PNNI hierarchy. The scope must be set to a value numerically less than or equal to the level of the lowest level peer group containing this node. Setting the scope to 0 will cause the address to be advertised globally within this PNNI routing domain." DEFVAL { -1 } ::= { mscAtmIfVptUniAddrPnniInfoProvEntry 1 } mscAtmIfVptUniAddrPnniInfoReachability OBJECT-TYPE SYNTAX INTEGER { internal(0), exterior(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates whether the address is internal or exterior. An internal reachable address is an address of a destination that is directly attached to the logical node advertising the address. An exterior reachable address is an address that can be reached through a PNNI routing domain, but which is not located in that PNNI routing domain." DEFVAL { internal } ::= { mscAtmIfVptUniAddrPnniInfoProvEntry 2 } -- AtmIf/n Uni CallingAddressScreening -- AtmIf/n Iisp CallingAddressScreening -- This component represents the screening of incoming ATM SVC -- call requests against provisioned ATM calling addresses (that is, -- screening SVC calls coming from specific addresses). If this -- component is not provisioned, all call requests are accepted and no -- calling address screening takes place. mscAtmIfVptUniCallingAScr OBJECT IDENTIFIER ::= { mscAtmIfVptUni 4 } mscAtmIfVptUniCallingAScrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniCallingAScrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfVptUniCallingAScr components." ::= { mscAtmIfVptUniCallingAScr 1 } mscAtmIfVptUniCallingAScrRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniCallingAScrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfVptUniCallingAScr component." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniCallingAScrIndex } ::= { mscAtmIfVptUniCallingAScrRowStatusTable 1 } MscAtmIfVptUniCallingAScrRowStatusEntry ::= SEQUENCE { mscAtmIfVptUniCallingAScrRowStatus RowStatus, mscAtmIfVptUniCallingAScrComponentName DisplayString, mscAtmIfVptUniCallingAScrStorageType StorageType, mscAtmIfVptUniCallingAScrIndex NonReplicated } mscAtmIfVptUniCallingAScrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfVptUniCallingAScr components. These components can be added and deleted." ::= { mscAtmIfVptUniCallingAScrRowStatusEntry 1 } mscAtmIfVptUniCallingAScrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfVptUniCallingAScrRowStatusEntry 2 } mscAtmIfVptUniCallingAScrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfVptUniCallingAScr tables." ::= { mscAtmIfVptUniCallingAScrRowStatusEntry 4 } mscAtmIfVptUniCallingAScrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfVptUniCallingAScr tables." ::= { mscAtmIfVptUniCallingAScrRowStatusEntry 10 } mscAtmIfVptUniCallingAScrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniCallingAScrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the provisionable attributes for the CallingAScr component." ::= { mscAtmIfVptUniCallingAScr 10 } mscAtmIfVptUniCallingAScrProvEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniCallingAScrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniCallingAScrProvTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniCallingAScrIndex } ::= { mscAtmIfVptUniCallingAScrProvTable 1 } MscAtmIfVptUniCallingAScrProvEntry ::= SEQUENCE { mscAtmIfVptUniCallingAScrAdminStatus INTEGER, mscAtmIfVptUniCallingAScrDefaultInsertionAddress HexString } mscAtmIfVptUniCallingAScrAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the calling address screening feature is enabled or disabled. If enabled, incoming SVC calls are screened against provisioned addresses. If enabled and the calling address in the ATM SVC call request is provisioned to be accepted, the call is accepted or rejected according to the action specified for that address. If the value is enabled, and the calling address in the address request is not provisioned, the call is rejected If the value is disabled, no calling address screening is performed." DEFVAL { disabled } ::= { mscAtmIfVptUniCallingAScrProvEntry 1 } mscAtmIfVptUniCallingAScrDefaultInsertionAddress OBJECT-TYPE SYNTAX HexString (SIZE (0..20)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the address to be inserted into the SVC connection request if adminStatus is enabled and the connection request does not contain a calling address. If the adminStatus attribute is enabled and this attribute is empty, all incoming SVC calls which do not contain a calling address are rejected." DEFVAL { ''H } -- "" ::= { mscAtmIfVptUniCallingAScrProvEntry 2 } mscAtmIfVptUniCallingAScrStatTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniCallingAScrStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains statistics related to the incoming SVC call requests received while the adminStatus attribute is set to enabled." ::= { mscAtmIfVptUniCallingAScr 11 } mscAtmIfVptUniCallingAScrStatEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniCallingAScrStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniCallingAScrStatTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniCallingAScrIndex } ::= { mscAtmIfVptUniCallingAScrStatTable 1 } MscAtmIfVptUniCallingAScrStatEntry ::= SEQUENCE { mscAtmIfVptUniCallingAScrAcceptedCalls Counter32, mscAtmIfVptUniCallingAScrRejectedCalls Counter32, mscAtmIfVptUniCallingAScrUnmatchedCalls Counter32 } mscAtmIfVptUniCallingAScrAcceptedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the incoming SVC calls which were accepted because the address specified in the call request matched a provisioned ATM address and the associated action was accept. When the counter exceeds the maximum, it wraps to 0." ::= { mscAtmIfVptUniCallingAScrStatEntry 1 } mscAtmIfVptUniCallingAScrRejectedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the incoming SVC calls which were rejected because the address specified in the call request matched a provisioned ATM address, but the associated action was reject. When the counter exceeds the maximum, it wraps to 0." ::= { mscAtmIfVptUniCallingAScrStatEntry 2 } mscAtmIfVptUniCallingAScrUnmatchedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the incoming SVC calls which were rejected because none of the provisioned ATM addresses matched the applicable address in the incoming SVC call request. When the counter exceeds the maximum, it wraps to 0." ::= { mscAtmIfVptUniCallingAScrStatEntry 3 } -- AtmIf/n Uni CallingAScr Address/addr,action -- AtmIf/n Iisp CallingAScr Address/addr,action -- AtmIf/n Uni CalledAScr Address/addr,action -- AtmIf/n Iisp CalledAScr Address/addr,action -- This component specifies a calling (or called) address with an -- action to accept or reject a connection request which contains a -- matching calling (or called) address. -- For the Calling Address Screening feature, if the specified action is -- accept, any call whose calling address matches that address is -- accepted. If the specified action is reject, any call whose calling -- address matches that address is rejected. -- For the Called Address Screening feature, if the specified action is -- accept, any call whose called address matches that address, is -- accepted. If the specified action is reject, any call whose called -- address matches that address is rejected. -- For both features, the incoming SVC call request is rejected if the -- address is not provisioned and the feature is enabled. mscAtmIfVptUniCallingAScrAddr OBJECT IDENTIFIER ::= { mscAtmIfVptUniCallingAScr 2 } mscAtmIfVptUniCallingAScrAddrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniCallingAScrAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfVptUniCallingAScrAddr components." ::= { mscAtmIfVptUniCallingAScrAddr 1 } mscAtmIfVptUniCallingAScrAddrRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniCallingAScrAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfVptUniCallingAScrAddr component." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniCallingAScrIndex, mscAtmIfVptUniCallingAScrAddrAddressIndex, mscAtmIfVptUniCallingAScrAddrAddressActionIndex } ::= { mscAtmIfVptUniCallingAScrAddrRowStatusTable 1 } MscAtmIfVptUniCallingAScrAddrRowStatusEntry ::= SEQUENCE { mscAtmIfVptUniCallingAScrAddrRowStatus RowStatus, mscAtmIfVptUniCallingAScrAddrComponentName DisplayString, mscAtmIfVptUniCallingAScrAddrStorageType StorageType, mscAtmIfVptUniCallingAScrAddrAddressIndex AsciiStringIndex, mscAtmIfVptUniCallingAScrAddrAddressActionIndex INTEGER } mscAtmIfVptUniCallingAScrAddrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfVptUniCallingAScrAddr components. These components can be added and deleted." ::= { mscAtmIfVptUniCallingAScrAddrRowStatusEntry 1 } mscAtmIfVptUniCallingAScrAddrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfVptUniCallingAScrAddrRowStatusEntry 2 } mscAtmIfVptUniCallingAScrAddrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfVptUniCallingAScrAddr tables." ::= { mscAtmIfVptUniCallingAScrAddrRowStatusEntry 4 } mscAtmIfVptUniCallingAScrAddrAddressIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..40)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscAtmIfVptUniCallingAScrAddr tables." ::= { mscAtmIfVptUniCallingAScrAddrRowStatusEntry 10 } mscAtmIfVptUniCallingAScrAddrAddressActionIndex OBJECT-TYPE SYNTAX INTEGER { accept(0), reject(1) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscAtmIfVptUniCallingAScrAddr tables." ::= { mscAtmIfVptUniCallingAScrAddrRowStatusEntry 11 } -- AtmIf/n Uni CalledAddressScreening -- AtmIf/n Iisp CalledAddressScreening -- This component represents the screening of incoming ATM SVC -- call requests against provisioned ATM called addresses (that is, -- going to specific destinations). If this component is not provisioned, -- all call requests are accepted and no called address screening takes -- place. mscAtmIfVptUniCalledAScr OBJECT IDENTIFIER ::= { mscAtmIfVptUni 5 } mscAtmIfVptUniCalledAScrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniCalledAScrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfVptUniCalledAScr components." ::= { mscAtmIfVptUniCalledAScr 1 } mscAtmIfVptUniCalledAScrRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniCalledAScrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfVptUniCalledAScr component." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniCalledAScrIndex } ::= { mscAtmIfVptUniCalledAScrRowStatusTable 1 } MscAtmIfVptUniCalledAScrRowStatusEntry ::= SEQUENCE { mscAtmIfVptUniCalledAScrRowStatus RowStatus, mscAtmIfVptUniCalledAScrComponentName DisplayString, mscAtmIfVptUniCalledAScrStorageType StorageType, mscAtmIfVptUniCalledAScrIndex NonReplicated } mscAtmIfVptUniCalledAScrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfVptUniCalledAScr components. These components can be added and deleted." ::= { mscAtmIfVptUniCalledAScrRowStatusEntry 1 } mscAtmIfVptUniCalledAScrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfVptUniCalledAScrRowStatusEntry 2 } mscAtmIfVptUniCalledAScrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfVptUniCalledAScr tables." ::= { mscAtmIfVptUniCalledAScrRowStatusEntry 4 } mscAtmIfVptUniCalledAScrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmIfVptUniCalledAScr tables." ::= { mscAtmIfVptUniCalledAScrRowStatusEntry 10 } mscAtmIfVptUniCalledAScrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniCalledAScrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the provisionable attributes for the CalledAScr component." ::= { mscAtmIfVptUniCalledAScr 10 } mscAtmIfVptUniCalledAScrProvEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniCalledAScrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniCalledAScrProvTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniCalledAScrIndex } ::= { mscAtmIfVptUniCalledAScrProvTable 1 } MscAtmIfVptUniCalledAScrProvEntry ::= SEQUENCE { mscAtmIfVptUniCalledAScrAdminStatus INTEGER } mscAtmIfVptUniCalledAScrAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the called address screening feature is enabled or disabled. If the value is enabled, incoming SVC calls will be screened against provisioned called addresses. If the value is enabled and the called address in the ATM SVC call request has been provisioned, the call is accepted or rejected according to the action specified for that address. If the value is enabled and the called address in the call request is not provisioned, the call is rejected. If the value is disabled, no called address screening is performed." DEFVAL { disabled } ::= { mscAtmIfVptUniCalledAScrProvEntry 1 } mscAtmIfVptUniCalledAScrStatTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniCalledAScrStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains statistics related to the incoming SVC call requests received while the adminStatus attribute is set to enabled." ::= { mscAtmIfVptUniCalledAScr 11 } mscAtmIfVptUniCalledAScrStatEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniCalledAScrStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmIfVptUniCalledAScrStatTable." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniCalledAScrIndex } ::= { mscAtmIfVptUniCalledAScrStatTable 1 } MscAtmIfVptUniCalledAScrStatEntry ::= SEQUENCE { mscAtmIfVptUniCalledAScrAcceptedCalls Counter32, mscAtmIfVptUniCalledAScrRejectedCalls Counter32, mscAtmIfVptUniCalledAScrUnmatchedCalls Counter32 } mscAtmIfVptUniCalledAScrAcceptedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the incoming SVC calls which were accepted because the address specified in the call request matched a provisioned ATM address and the associated action was accept. When the counter exceeds the maximum, it wraps to 0." ::= { mscAtmIfVptUniCalledAScrStatEntry 1 } mscAtmIfVptUniCalledAScrRejectedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the incoming SVC calls which were rejected because the address specified in the call request matched a provisioned ATM address, but the associated action was reject. When the counter exceeds the maximum, it wraps to 0." ::= { mscAtmIfVptUniCalledAScrStatEntry 2 } mscAtmIfVptUniCalledAScrUnmatchedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the incoming SVC calls which were rejected because none of the provisioned ATM addresses matched the applicable address in the incoming SVC call request. When the counter exceeds the maximum, it wraps to 0." ::= { mscAtmIfVptUniCalledAScrStatEntry 3 } -- AtmIf/n Uni CallingAScr Address/addr,action -- AtmIf/n Iisp CallingAScr Address/addr,action -- AtmIf/n Uni CalledAScr Address/addr,action -- AtmIf/n Iisp CalledAScr Address/addr,action -- This component specifies a calling (or called) address with an -- action to accept or reject a connection request which contains a -- matching calling (or called) address. -- For the Calling Address Screening feature, if the specified action is -- accept, any call whose calling address matches that address is -- accepted. If the specified action is reject, any call whose calling -- address matches that address is rejected. -- For the Called Address Screening feature, if the specified action is -- accept, any call whose called address matches that address, is -- accepted. If the specified action is reject, any call whose called -- address matches that address is rejected. -- For both features, the incoming SVC call request is rejected if the -- address is not provisioned and the feature is enabled. mscAtmIfVptUniCalledAScrAddr OBJECT IDENTIFIER ::= { mscAtmIfVptUniCalledAScr 2 } mscAtmIfVptUniCalledAScrAddrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmIfVptUniCalledAScrAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmIfVptUniCalledAScrAddr components." ::= { mscAtmIfVptUniCalledAScrAddr 1 } mscAtmIfVptUniCalledAScrAddrRowStatusEntry OBJECT-TYPE SYNTAX MscAtmIfVptUniCalledAScrAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmIfVptUniCalledAScrAddr component." INDEX { mscAtmIfIndex, mscAtmIfVptIndex, mscAtmIfVptUniIndex, mscAtmIfVptUniCalledAScrIndex, mscAtmIfVptUniCalledAScrAddrAddressIndex, mscAtmIfVptUniCalledAScrAddrAddressActionIndex } ::= { mscAtmIfVptUniCalledAScrAddrRowStatusTable 1 } MscAtmIfVptUniCalledAScrAddrRowStatusEntry ::= SEQUENCE { mscAtmIfVptUniCalledAScrAddrRowStatus RowStatus, mscAtmIfVptUniCalledAScrAddrComponentName DisplayString, mscAtmIfVptUniCalledAScrAddrStorageType StorageType, mscAtmIfVptUniCalledAScrAddrAddressIndex AsciiStringIndex, mscAtmIfVptUniCalledAScrAddrAddressActionIndex INTEGER } mscAtmIfVptUniCalledAScrAddrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmIfVptUniCalledAScrAddr components. These components can be added and deleted." ::= { mscAtmIfVptUniCalledAScrAddrRowStatusEntry 1 } mscAtmIfVptUniCalledAScrAddrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmIfVptUniCalledAScrAddrRowStatusEntry 2 } mscAtmIfVptUniCalledAScrAddrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmIfVptUniCalledAScrAddr tables." ::= { mscAtmIfVptUniCalledAScrAddrRowStatusEntry 4 } mscAtmIfVptUniCalledAScrAddrAddressIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..40)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscAtmIfVptUniCalledAScrAddr tables." ::= { mscAtmIfVptUniCalledAScrAddrRowStatusEntry 10 } mscAtmIfVptUniCalledAScrAddrAddressActionIndex OBJECT-TYPE SYNTAX INTEGER { accept(0), reject(1) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mscAtmIfVptUniCalledAScrAddr tables." ::= { mscAtmIfVptUniCalledAScrAddrRowStatusEntry 11 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { mscAtmIfUniServiceExchange, -- mscAtmIfVptUniAccountConnectionType, -- mscAtmIfVptUniSigVcdTrafficShaping, -- mscAtmIfVptUniCallingAScrComponentName, -- mscAtmIfVptUniCallingAScrRowStatus, -- mscAtmIfUniSigAdminState, -- mscAtmIfVptUniSigLastTxCauseCode, -- mscAtmIfVptUniSigPeakConnections, -- mscAtmIfVptUniCalledAScrAddrComponentName, -- mscAtmIfUniCallingAScrUnmatchedCalls, -- mscAtmIfVptUniSigVcdTdpValue, -- mscAtmIfUniSigRowStatus, -- mscAtmIfVptUniCalledAScrRowStatus, -- mscAtmIfVptUniSigVcdTrafficDescType, -- mscAtmIfVptUniSigVcdUnshapedTransmitQueueing, -- mscAtmIfVptUniAddrTermSPRowStatus, -- mscAtmIfUniSigOperatingMode, -- mscAtmIfUniSigPeakConnections, -- mscAtmIfVptUniSigFailedConnections, -- mscAtmIfUniSigTxPdus, -- mscAtmIfVptUniCallingAScrRejectedCalls, -- mscAtmIfVptUniAddrComponentName, -- mscAtmIfUniSigUsageState, -- mscAtmIfVptUniCallingAScrAddrStorageType, -- mscAtmIfUniSigVcdWeight, -- mscAtmIfVptUniAddrPnniInfoRowStatus, -- mscAtmIfUniAddrPnniInfoReachability, -- mscAtmIfVptUniSigVcdWeight, -- mscAtmIfUniSigSuccessfulPmpConnections, -- mscAtmIfUniSigFailedConnections, -- mscAtmIfVptUniSigLastRxCauseCode, -- mscAtmIfUniAddrScope, -- mscAtmIfUniCallingAScrStorageType, -- mscAtmIfUniSigSuccessfulConnections, -- mscAtmIfUniLoopPrevention, -- mscAtmIfUniSigVcdQosClass, -- mscAtmIfVptUniSigAddressConversion, -- mscAtmIfUniSigLastTxDiagCode, -- mscAtmIfUniCallingAScrRejectedCalls, -- mscAtmIfUniCalledAScrAddrComponentName, -- mscAtmIfUniCalledAScrComponentName, -- mscAtmIfVptUniSigCurrentPmpConnections, -- mscAtmIfVptUniAddrStorageType, -- mscAtmIfVptUniStorageType, -- mscAtmIfUniSigCurrentPmpConnections, -- mscAtmIfUniCalledAScrAdminStatus, -- mscAtmIfUniSigVcdUsageParameterControl, -- mscAtmIfUniAddrTermSPComponentName, -- mscAtmIfVptUniCallingAScrAcceptedCalls, -- mscAtmIfUniSigVcdComponentName, -- mscAtmIfUniIlmiEsiToRegisterRowStatus, -- mscAtmIfUniSigVcdTrafficDescType, -- mscAtmIfVptUniSigStorageType, -- mscAtmIfUniIlmiVci, -- mscAtmIfVptUniCalledAScrComponentName, -- mscAtmIfUniMacAddress, -- mscAtmIfVptUniCalledAScrStorageType, -- mscAtmIfVptUniAddrReachability, -- mscAtmIfVptUniCalledAScrAdminStatus, -- mscAtmIfUniAddrPnniInfoComponentName, -- mscAtmIfUniCallingAScrAddrRowStatus, -- mscAtmIfUniCallingAScrRowStatus, -- mscAtmIfUniSigRxPdus, -- mscAtmIfVptUniAddrTermSPComponentName, -- mscAtmIfVptUniCalledAScrAddrRowStatus, -- mscAtmIfVptUniAddrPnniInfoStorageType, -- mscAtmIfVptUniCallingAScrAddrComponentName, -- mscAtmIfUniSigLastRxDiagCode, -- mscAtmIfUniCalledAScrUnmatchedCalls, -- mscAtmIfUniSigVci, -- mscAtmIfUniCalledAScrAcceptedCalls, -- mscAtmIfUniSigLastTxCauseCode, -- mscAtmIfUniSigPeakPmpConnections, -- mscAtmIfVptUniSoftPvpAndPvcHoldOffTime, -- mscAtmIfVptUniAccountCollection, -- mscAtmIfVptUniSigOperationalState, -- mscAtmIfUniIlmiEsiToRegisterValue, -- mscAtmIfVptUniSigVcdRowStatus, -- mscAtmIfVptUniSoftPvpAndPvcRetryPeriod, -- mscAtmIfUniCallingAScrAcceptedCalls, -- mscAtmIfVptUniSigComponentName, -- mscAtmIfUniIlmiComponentName, -- mscAtmIfUniCallingAScrComponentName, -- mscAtmIfVptUniServiceExchange, -- mscAtmIfUniSigNewCurrentConnections, -- mscAtmIfVptUniAddrRowStatus, -- mscAtmIfVptUniCalledAScrRejectedCalls, -- mscAtmIfVptUniSigAdminState, -- mscAtmIfUniSoftPvpAndPvcHoldOffTime, -- mscAtmIfUniCallingAScrAddrStorageType, -- mscAtmIfUniIlmiRxBadPdusDiscarded, -- mscAtmIfUniCalledAScrAddrStorageType, -- mscAtmIfUniSide, -- mscAtmIfUniSigAddressConversion, -- mscAtmIfUniComponentName, -- mscAtmIfVptUniSigRowStatus, -- mscAtmIfVptUniCalledAScrAcceptedCalls, -- mscAtmIfUniAccountClass, -- mscAtmIfUniSigLastRxCauseCode, -- mscAtmIfUniSigVcdStorageType, -- mscAtmIfVptUniAddrTermSPStorageType, -- mscAtmIfUniSigVcdTdpValue, -- mscAtmIfVptUniComponentName, -- mscAtmIfVptUniSigVcdStorageType, -- mscAtmIfUniAccountConnectionType, -- mscAtmIfUniAddrPnniInfoStorageType, -- mscAtmIfUniSigFailedPmpConnections, -- mscAtmIfUniIlmiStorageType, -- mscAtmIfVptUniCallingAScrAddrRowStatus, -- mscAtmIfVptUniSigPeakPmpConnections, -- mscAtmIfUniAddrComponentName, -- mscAtmIfUniCalledAScrAddrRowStatus, -- mscAtmIfUniCalledAScrRowStatus, -- mscAtmIfVptUniAddrScope, -- mscAtmIfVptUniCallingAScrStorageType, -- mscAtmIfVptUniLoopPrevention, -- mscAtmIfVptUniSigVcdQosClass, -- mscAtmIfVptUniSigFailedPmpConnections, -- mscAtmIfUniSigVcdUnshapedTransmitQueueing, -- mscAtmIfUniAddrTermSPRowStatus, -- mscAtmIfUniSigComponentName, -- mscAtmIfUniSigVcdRowStatus, -- mscAtmIfVptUniSigUsageState, -- mscAtmIfUniIlmiAdminState, -- mscAtmIfVptUniSigSuccessfulPmpConnections, -- mscAtmIfUniCalledAScrStorageType, -- mscAtmIfVptUniSigTxPdus, -- mscAtmIfVptUniSigVcdComponentName, -- mscAtmIfUniAddrPnniInfoRowStatus, -- mscAtmIfVptUniSigSuccessfulConnections, -- mscAtmIfUniIlmiRowStatus, -- mscAtmIfUniAddrTermSPStorageType, -- mscAtmIfUniCalledAScrRejectedCalls, -- mscAtmIfVptUniAddrPnniInfoReachability, -- mscAtmIfVptUniAddrPnniInfoComponentName, -- mscAtmIfVptUniSigVcdUsageParameterControl, -- mscAtmIfUniAccountCollection, -- mscAtmIfVptUniSigVcdAtmServiceCategory, -- mscAtmIfVptUniSigRxPdus, -- mscAtmIfVptUniSigVci, -- mscAtmIfUniAddrStorageType, -- mscAtmIfUniStorageType, -- mscAtmIfUniIlmiUsageState, -- mscAtmIfVptUniAddrPnniInfoScope, -- mscAtmIfVptUniSigLastRxDiagCode, -- mscAtmIfVptUniCalledAScrUnmatchedCalls, -- mscAtmIfUniVersion, -- mscAtmIfUniSigVcdTrafficShaping, -- mscAtmIfUniIlmiTxPdus, -- mscAtmIfVptUniSigLastTxDiagCode, -- mscAtmIfUniIlmiPrefixToRegisterRowStatus, -- mscAtmIfVptUniCallingAScrUnmatchedCalls, -- mscAtmIfUniAddrReachability, -- mscAtmIfVptUniVersion, -- mscAtmIfVptUniSigOperatingMode, -- mscAtmIfUniIlmiOperationalState, -- mscAtmIfUniSigOperationalState, -- mscAtmIfVptUniRowStatus, -- mscAtmIfUniIlmiPrefixToRegisterValue, -- mscAtmIfVptUniSigNewCurrentConnections, -- mscAtmIfUniCallingAScrAddrComponentName, -- mscAtmIfUniAddrRowStatus, -- mscAtmIfUniRowStatus, -- mscAtmIfVptUniCalledAScrAddrStorageType, -- mscAtmIfUniCallingAScrAdminStatus, -- mscAtmIfUniSigStorageType, -- mscAtmIfVptUniSide, -- mscAtmIfVptUniCallingAScrDefaultInsertionAddress, -- mscAtmIfUniCallingAScrDefaultInsertionAddress, -- mscAtmIfUniIlmiRxPdus, -- mscAtmIfVptUniCallingAScrAdminStatus, -- mscAtmIfVptUniAccountClass, -- mscAtmIfUniSoftPvpAndPvcRetryPeriod, -- mscAtmIfVptUniVpci, -- mscAtmIfUniSigVcdAtmServiceCategory, -- mscAtmIfUniAddrPnniInfoScope, -- mscAtmIfUniIlmiOperatingMode } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." atmUniGroup OBJECT IDENTIFIER ::= { atmUniMIB 1 } atmUniGroupCA OBJECT IDENTIFIER ::= { atmUniGroup 1 } atmUniGroupCA02 OBJECT IDENTIFIER ::= { atmUniGroupCA 3 } atmUniGroupCA02A OBJECT IDENTIFIER ::= { atmUniGroupCA02 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "MscPassport Release 1.2 AtmUni." -- STATUS mandatory -- DESCRIPTION "Carrier Passport AtmUni MIB: MIB Version CA02A, -- Software Version CA02S9C." -- SUPPORTS Nortel-MsCarrier-MscPassport-AtmUniMIB -- INCLUDES { atmUniGroupCA02A } atmUniCapabilities OBJECT IDENTIFIER ::= { atmUniMIB 3 } atmUniCapabilitiesCA OBJECT IDENTIFIER ::= { atmUniCapabilities 1 } atmUniCapabilitiesCA02 OBJECT IDENTIFIER ::= { atmUniCapabilitiesCA 3 } atmUniCapabilitiesCA02A OBJECT IDENTIFIER ::= { atmUniCapabilitiesCA02 2 } END