All MIBs › Nortel-MsCarrier-MscPassport-AtmUniMIB › mscAtmIfUniSigVcdUsageParameterControl
mscAtmIfUniSigVcdUsageParameterControl
Module: Nortel-MsCarrier-MscPassport-AtmUniMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmUniMIB::mscAtmIfUniSigVcdUsageParameterControl
OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.70
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software releases, but should no longer be used
What is mscAtmIfUniSigVcdUsageParameterControl?
Turns UPC (usage parameter control / traffic policing) on or off for traffic received on this connection; sameAsCa(2) inherits the setting from the service-category component, while disabled(1, the default) turns UPC off outright.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.70 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmUniMIB::mscAtmIfUniSigVcdUsageParameterControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.70.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmUniMIB::mscAtmIfUniSigVcdUsageParameterControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.70.1 i <value>
Start monitoring Nortel MSCarrier Passport (Magellan Passport) ATM switch (UNI signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmUniMIB::mscAtmIfUniSigVcdUsageParameterControl OID value, configure state conditions and alerts, and monitor any Nortel MSCarrier Passport (Magellan Passport) ATM switch (UNI signaling) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1.114 | mscAtmIf | Nortel-MsCarrier-MscPassport-AtmCoreMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.6 | mscAtmIfUni | Nortel-MsCarrier-MscPassport-AtmUniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.6.3 | mscAtmIfUniSig | Nortel-MsCarrier-MscPassport-AtmUniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2 | mscAtmIfUniSigVcd | Nortel-MsCarrier-MscPassport-AtmUniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10 | mscAtmIfUniSigVcdProvTable | Nortel-MsCarrier-MscPassport-AtmUniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1 | mscAtmIfUniSigVcdProvEntry | Nortel-MsCarrier-MscPassport-AtmUniMIB |
| 1.3.6.1.4.1.562.36.2.1.114.6.3.2.10.1.70 | mscAtmIfUniSigVcdUsageParameterControl | Nortel-MsCarrier-MscPassport-AtmUniMIB |