Nortel-MsCarrier-MscPassport-AtmNetworkingMIB :: mscAtmIfVpcSrcLastFailureDiagCode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-AtmNetworkingMIB › mscAtmIfVpcSrcLastFailureDiagCode

mscAtmIfVpcSrcLastFailureDiagCode

Module: Nortel-MsCarrier-MscPassport-AtmNetworkingMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscAtmIfVpcSrcLastFailureDiagCode

OID (numeric): 1.3.6.1.4.1.562.36.2.1.114.4.6.11.1.4

Node type: OBJECT-TYPE

Type: AsciiString

Access: read-only

Description: This attribute contains the diagnostic code in the last transmitted signalling message. The diagnostic code is contained in the CAUSE information element and identifies an information element type or timer type. The diagnostic code is present only if a procedural error is detected by the signalling protocol. A diagnostic code is always accompanied by the cause code. If there is no failure, this attribute is set to NULL.

What is mscAtmIfVpcSrcLastFailureDiagCode?

Holds the diagnostic code (up to 8 ASCII characters) accompanying the last CAUSE code, identifying the specific information element or timer type involved in a signalling procedural error; left NULL when there has been no failure.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.4.6.11.1.4
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscAtmIfVpcSrcLastFailureDiagCode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.114.4.6.11.1.4.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscAtmIfVpcSrcLastFailureDiagCode.1

Start monitoring Nortel MSC Passport mobile carrier switch (ATM networking/routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscAtmIfVpcSrcLastFailureDiagCode OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (ATM networking/routing) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1.114mscAtmIfNortel-MsCarrier-MscPassport-AtmCoreMIB
1.3.6.1.4.1.562.36.2.1.114.4mscAtmIfVpcNortel-MsCarrier-MscPassport-AtmCoreMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.114.4.6mscAtmIfVpcSrcNortel-MsCarrier-MscPassport-AtmNetworkingMIB
1.3.6.1.4.1.562.36.2.1.114.4.6.11mscAtmIfVpcSrcOperTableNortel-MsCarrier-MscPassport-AtmNetworkingMIB
1.3.6.1.4.1.562.36.2.1.114.4.6.11.1mscAtmIfVpcSrcOperEntryNortel-MsCarrier-MscPassport-AtmNetworkingMIB
1.3.6.1.4.1.562.36.2.1.114.4.6.11.1.4mscAtmIfVpcSrcLastFailureDiagCodeNortel-MsCarrier-MscPassport-AtmNetworkingMIB