Nortel-MsCarrier-MscPassport-AtmNetworkingMIB :: mscARtgPnniRfAtmServiceCategory

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-AtmNetworkingMIB › mscARtgPnniRfAtmServiceCategory

mscARtgPnniRfAtmServiceCategory

Module: Nortel-MsCarrier-MscPassport-AtmNetworkingMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniRfAtmServiceCategory

OID (numeric): 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies the ATM service category for both directions of the connection.

If this attribute is set to derivedFromBBC, the Broadband Bearer Capability (BBC) and bestEffort attributes are used to determine the atmServiceCategory of this connection.

If this attribute is set to other than derivedFromBBC, the value of this attribute is used to override the provisioned BBC IE parameters. In those cases, the BBC attributes are not used.

The constantBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. The consistent availability of a fixed quantity of bandwidth is considered appropriate for CBR service. Cells which are delayed beyond the value specified by CellTransfer Delay are assumed to be of significantly reduce value to the application.

The rtVariableBitRate service category is intended for real time applications, that is those requiring tightly constrained delay and delay variation, as would be appropriate for voice and video applications. Sources are expected to transmit at a rate which varies with time. Equivalently, the source can be described as 'bursty'. Cells which are delayed beyond the value specified by CTD are assumed to be of significantly reduced value to the application. VBR real time service may support statistical multiplexing of real time sources.

The nrtVariableBitRate service category is intended for non-real time applications which have bursty traffic characteristics and which can be characterized in terms of a PCR, SCR, and MBS. For those cells which are transferred within the traffic contract, the application expects a low cell loss ratio. For all connections, it expects a bound on the mean cell transfer delay. VBR non-real time service may support statistical multiplexing of connections.

The unspecifiedBitRate service is intended for non-real time applications; that is, those not requiring tightly constrained delay and delay variation. UBR sources are expected to be bursty. UBR service supports a high degree of statistical multiplexing among sources. UBR service does not specify traffic related service guarantees. No numerical commitments are made with respect to the cell loss ratio experienced by a UBR connection, or as to the cell transfer delay experienced by cells on the connection.

What is mscARtgPnniRfAtmServiceCategory?

Sets the ATM service category (CBR, real-time VBR, non-real-time VBR, or UBR, default unspecifiedBitRate/UBR) used for this route computation's traffic contract, or derivedFromBBC to instead let the Broadband Bearer Capability and best-effort attributes determine it -- exactly one of the two methods may be active at a time.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.6
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniRfAtmServiceCategory

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.6.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniRfAtmServiceCategory.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.6.1 i <value>

Start monitoring Nortel MSC Passport mobile carrier switch (ATM networking/routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniRfAtmServiceCategory OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (ATM networking/routing) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.95mscARtgNortel-MsCarrier-MscPassport-AtmNetworkingMIB
1.3.6.1.4.1.562.36.2.1.95.3mscARtgPnniNortel-MsCarrier-MscPassport-AtmNetworkingMIB
1.3.6.1.4.1.562.36.2.1.95.3.2mscARtgPnniRfNortel-MsCarrier-MscPassport-AtmNetworkingMIB
1.3.6.1.4.1.562.36.2.1.95.3.2.10mscARtgPnniRfCriteriaTableNortel-MsCarrier-MscPassport-AtmNetworkingMIB
1.3.6.1.4.1.562.36.2.1.95.3.2.10.1mscARtgPnniRfCriteriaEntryNortel-MsCarrier-MscPassport-AtmNetworkingMIB
1.3.6.1.4.1.562.36.2.1.95.3.2.10.1.6mscARtgPnniRfAtmServiceCategoryNortel-MsCarrier-MscPassport-AtmNetworkingMIB