All MIBs › Nortel-MsCarrier-MscPassport-AtmNetworkingMIB › mscARtgPnniHelloInactivityFactor
mscARtgPnniHelloInactivityFactor
Module: Nortel-MsCarrier-MscPassport-AtmNetworkingMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniHelloInactivityFactor
OID (numeric): 1.3.6.1.4.1.562.36.2.1.95.3.12.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the default number of Hello intervals allowed to pass without receiving a Hello from the neighbor node, before an attempt is made to re-stage, for routing control channels on this node. The hello inactivity timer is enabled in the oneWayInside, twoWayInside, oneWayOutside, twoWayOutside and commonOutside (see the helloState attribute on the Rcc component for a description of these states). Note that the value for the Hello interval used in the calculation is the one specified in the Hello packet from the neighbor node.
What is mscARtgPnniHelloInactivityFactor?
Sets (default 5) how many Hello intervals may pass without receiving a Hello from a neighbor before this node attempts to re-stage that PNNI routing control channel; the check runs during the oneWayInside/twoWayInside/oneWayOutside/twoWayOutside/commonOutside hello states.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.95.3.12.1.3 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniHelloInactivityFactor
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.95.3.12.1.3.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniHelloInactivityFactor.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.95.3.12.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mscARtgPnniHelloInactivityFactor.1
Start monitoring Nortel MSC Passport mobile carrier switch (ATM networking/routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniHelloInactivityFactor OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (ATM networking/routing) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.95 | mscARtg | Nortel-MsCarrier-MscPassport-AtmNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.95.3 | mscARtgPnni | Nortel-MsCarrier-MscPassport-AtmNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.95.3.12 | mscARtgPnniHlParmsTable | Nortel-MsCarrier-MscPassport-AtmNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.95.3.12.1 | mscARtgPnniHlParmsEntry | Nortel-MsCarrier-MscPassport-AtmNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.95.3.12.1.3 | mscARtgPnniHelloInactivityFactor | Nortel-MsCarrier-MscPassport-AtmNetworkingMIB |