All MIBs › Nortel-MsCarrier-MscPassport-AtmNetworkingMIB › mscARtgPnniDefaultScope
mscARtgPnniDefaultScope
Module: Nortel-MsCarrier-MscPassport-AtmNetworkingMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniDefaultScope
OID (numeric): 1.3.6.1.4.1.562.36.2.1.95.3.10.1.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the default PNNI scope for ATM addresses associated with this node. The PNNI scope determines the level to which the address will be advertised within the PNNI routing domain. A provisioned Addr component may override the default scope in a PnniInfo subcomponent.
A value of 0 means that all addresses which do not have provisioned scopes will be advertised globally within the PNNI routing domain.
The value specified must be numerically smaller than or equal to that of the lowest level at which this node is configured in the PNNI hierarchy.
What is mscARtgPnniDefaultScope?
Sets the default PNNI advertising scope (0-104) for this node's ATM addresses that don't have their own provisioned scope; a value of 0 advertises those addresses globally across the whole PNNI routing domain, while the chosen value must be numerically at or below the node's lowest configured PNNI hierarchy level.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.95.3.10.1.2 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniDefaultScope
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.95.3.10.1.2.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniDefaultScope.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.95.3.10.1.2.1 i <value>
Start monitoring Nortel MSC Passport mobile carrier switch (ATM networking/routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniDefaultScope OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (ATM networking/routing) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.95 | mscARtg | Nortel-MsCarrier-MscPassport-AtmNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.95.3 | mscARtgPnni | Nortel-MsCarrier-MscPassport-AtmNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.95.3.10 | mscARtgPnniProvTable | Nortel-MsCarrier-MscPassport-AtmNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.95.3.10.1 | mscARtgPnniProvEntry | Nortel-MsCarrier-MscPassport-AtmNetworkingMIB |
| 1.3.6.1.4.1.562.36.2.1.95.3.10.1.2 | mscARtgPnniDefaultScope | Nortel-MsCarrier-MscPassport-AtmNetworkingMIB |