Nortel-MsCarrier-MscPassport-AtmNetworkingMIB :: mscARtgPnniAvcrPm

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-AtmNetworkingMIB › mscARtgPnniAvcrPm

mscARtgPnniAvcrPm

Module: Nortel-MsCarrier-MscPassport-AtmNetworkingMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniAvcrPm

OID (numeric): 1.3.6.1.4.1.562.36.2.1.95.3.14.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute when multiplied by the current Available Cell Rate specifies the threshold used in the algorithms that determine significant change for AvCR parameters. If the resulting threshold is lower than minimum threshold, minimum threshold will be used.

Increasing the value of the attribute increases the range of insignificance and reduces the amount of PTSP flooding due to changes in resource availability.

What is mscARtgPnniAvcrPm?

Multiplier (1-99, default 50) applied to the current Available Cell Rate to derive the change-significance threshold for AvCR metrics, falling back to the mscARtgPnniAvcrMt minimum threshold if this computed value is lower; raising it reduces PTSP flooding from resource-availability changes.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.95.3.14.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniAvcrPm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.95.3.14.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniAvcrPm.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.95.3.14.1.2.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> mscARtgPnniAvcrPm.1

Start monitoring Nortel MSC Passport mobile carrier switch (ATM networking/routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmNetworkingMIB::mscARtgPnniAvcrPm OID value, configure state conditions and alerts, and monitor any Nortel MSC Passport mobile carrier switch (ATM networking/routing) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.95mscARtgNortel-MsCarrier-MscPassport-AtmNetworkingMIB
1.3.6.1.4.1.562.36.2.1.95.3mscARtgPnniNortel-MsCarrier-MscPassport-AtmNetworkingMIB
1.3.6.1.4.1.562.36.2.1.95.3.14mscARtgPnniThreshParmsTableNortel-MsCarrier-MscPassport-AtmNetworkingMIB
1.3.6.1.4.1.562.36.2.1.95.3.14.1mscARtgPnniThreshParmsEntryNortel-MsCarrier-MscPassport-AtmNetworkingMIB
1.3.6.1.4.1.562.36.2.1.95.3.14.1.2mscARtgPnniAvcrPmNortel-MsCarrier-MscPassport-AtmNetworkingMIB