All MIBs › Nortel-MsCarrier-MscPassport-AtmMpeMIB › mscAtmMpeEncapType
mscAtmMpeEncapType
Module: Nortel-MsCarrier-MscPassport-AtmMpeMIB
OID (symbolic): Nortel-MsCarrier-MscPassport-AtmMpeMIB::mscAtmMpeEncapType
OID (numeric): 1.3.6.1.4.1.562.36.2.1.118.12.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies the rfc1483 encapsulation type to be used for the AtmConnections under this AtmMpe. Specifying llcEncap allows multiplexing of multiple protocols over the VCCs. The protocol of the carried PDU will be identified by an IEEE 802.2 Logical Link Control header. If Bridging or Inverse ARP is to be carried over a VCC, llcEncap must be used. Specifying ipVcEncap or ipxVcEncap indicates that all the VCCs (i.e. AtmConnections) under an AtmMpe component will use VC based multiplexing and will carry IP or IPX PDUs only. Thus an IpxPort cannot be provisioned under a protocol port linked to an AtmMpe component with encapsulation type of ipVcEncap. Similarly, an IpPort cannot be provisioned under a protocol port linked to an AtmMpe component with encapsulation type of ipxVcEncap.
What is mscAtmMpeEncapType?
The RFC 1483 encapsulation type used for connections under this AtmMpe: llcEncap (allows multiple protocols multiplexed via an 802.2 LLC header, required for bridging or inverse ARP), ipVcEncap, or ipxVcEncap (dedicated VC-based multiplexing carrying only IP or only IPX respectively). This choice constrains which kind of protocol port can be provisioned underneath it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.118.12.1.2 snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmMpeMIB::mscAtmMpeEncapType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.118.12.1.2.1 snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmMpeMIB::mscAtmMpeEncapType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.118.12.1.2.1 i <value>
Start monitoring Nortel/Bay Networks Passport MscPassport carrier switch (ATM Multiprotocol Encapsulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmMpeMIB::mscAtmMpeEncapType OID value, configure state conditions and alerts, and monitor any Nortel/Bay Networks Passport MscPassport carrier switch (ATM Multiprotocol Encapsulation) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.36 | msCarrier | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2 | mscPassport | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.36.2.1 | mscComponents | Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.118 | mscAtmMpe | Nortel-MsCarrier-MscPassport-AtmMpeMIB |
| 1.3.6.1.4.1.562.36.2.1.118.12 | mscAtmMpeProvTable | Nortel-MsCarrier-MscPassport-AtmMpeMIB |
| 1.3.6.1.4.1.562.36.2.1.118.12.1 | mscAtmMpeProvEntry | Nortel-MsCarrier-MscPassport-AtmMpeMIB |
| 1.3.6.1.4.1.562.36.2.1.118.12.1.2 | mscAtmMpeEncapType | Nortel-MsCarrier-MscPassport-AtmMpeMIB |