Nortel-MsCarrier-MscPassport-AtmMpeMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 mscPassportMIBs, mscComponents FROM Nortel-MsCarrier-MscPassport-UsefulDefinitionsMIB Counter32, DisplayString, StorageType, RowStatus, InterfaceIndex, Integer32, Unsigned32 FROM Nortel-MsCarrier-MscPassport-StandardTextualConventionsMIB Link FROM Nortel-MsCarrier-MscPassport-TextualConventionsMIB; -- LAST-UPDATED "9909010000Z" -- ORGANIZATION "Nortel Networks" -- CONTACT-INFO " -- Nortel Carrier Data Network Management -- -- Postal: P.O. Box 3511, Station C -- Ottawa, Ontario -- Canada K1Y 4H7 -- -- via the WEB: http://www.nortelnetworks.com -- select 'Contact Us' from the menu -- -- via phone: 1-800-4NORTEL" -- DESCRIPTION -- "The module describing the Nortel MsCarrier MscPassport -- AtmMpe Enterprise MIB." atmMpeMIB OBJECT IDENTIFIER ::= { mscPassportMIBs 65 } -- AtmMpe/n -- This component represents a logical interface between the Virtual -- Router and an ATM media (AtmIf). Multiprotocol Encapsulation as -- specified in RFC1483 is used to transfer higher-layer protocol data -- across virtual channels in an ATM network. AtmMpes provide a -- means to associate multiple ATM virtual channel connections with a -- single VirtualRouter ProtocolPort. The AtmMpe component is -- associated with a ProtocolPort via a linkage attribute and virtual -- channel connections via a linkage attribute in each AtmConnection -- subcomponent. mscAtmMpe OBJECT IDENTIFIER ::= { mscComponents 118 } mscAtmMpeRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmMpeRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmMpe components." ::= { mscAtmMpe 1 } mscAtmMpeRowStatusEntry OBJECT-TYPE SYNTAX MscAtmMpeRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmMpe component." INDEX { mscAtmMpeIndex } ::= { mscAtmMpeRowStatusTable 1 } MscAtmMpeRowStatusEntry ::= SEQUENCE { mscAtmMpeRowStatus RowStatus, mscAtmMpeComponentName DisplayString, mscAtmMpeStorageType StorageType, mscAtmMpeIndex Integer32 } mscAtmMpeRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmMpe components. These components can be added and deleted." ::= { mscAtmMpeRowStatusEntry 1 } mscAtmMpeComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmMpeRowStatusEntry 2 } mscAtmMpeStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmMpe tables." ::= { mscAtmMpeRowStatusEntry 4 } mscAtmMpeIndex OBJECT-TYPE SYNTAX Integer32 (0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmMpe tables." ::= { mscAtmMpeRowStatusEntry 10 } mscAtmMpeCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmMpeCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { mscAtmMpe 10 } mscAtmMpeCidDataEntry OBJECT-TYPE SYNTAX MscAtmMpeCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmMpeCidDataTable." INDEX { mscAtmMpeIndex } ::= { mscAtmMpeCidDataTable 1 } MscAtmMpeCidDataEntry ::= SEQUENCE { mscAtmMpeCustomerIdentifier Unsigned32 } mscAtmMpeCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { mscAtmMpeCidDataEntry 1 } mscAtmMpeIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmMpeIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { mscAtmMpe 11 } mscAtmMpeIfEntryEntry OBJECT-TYPE SYNTAX MscAtmMpeIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmMpeIfEntryTable." INDEX { mscAtmMpeIndex } ::= { mscAtmMpeIfEntryTable 1 } MscAtmMpeIfEntryEntry ::= SEQUENCE { mscAtmMpeIfAdminStatus INTEGER, mscAtmMpeIfIndex InterfaceIndex } mscAtmMpeIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscAtmMpeIfEntryEntry 1 } mscAtmMpeIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { mscAtmMpeIfEntryEntry 2 } mscAtmMpeProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmMpeProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for the AtmMpe component." ::= { mscAtmMpe 12 } mscAtmMpeProvEntry OBJECT-TYPE SYNTAX MscAtmMpeProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmMpeProvTable." INDEX { mscAtmMpeIndex } ::= { mscAtmMpeProvTable 1 } MscAtmMpeProvEntry ::= SEQUENCE { mscAtmMpeMaxTransmissionUnit Unsigned32, mscAtmMpeEncapType INTEGER, mscAtmMpeIlsForwarder Link } mscAtmMpeMaxTransmissionUnit OBJECT-TYPE SYNTAX Unsigned32 (256..9188) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute sets the size of the largest datagram which can be sent on the interface. This includes the size of the Logical Link Control header (if applicable) as well as the protocol data unit." DEFVAL { 9188 } ::= { mscAtmMpeProvEntry 1 } mscAtmMpeEncapType OBJECT-TYPE SYNTAX INTEGER { llcEncap(1), ipVcEncap(2), ipxVcEncap(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the rfc1483 encapsulation type to be used for the AtmConnections under this AtmMpe. Specifying llcEncap allows multiplexing of multiple protocols over the VCCs. The protocol of the carried PDU will be identified by an IEEE 802.2 Logical Link Control header. If Bridging or Inverse ARP is to be carried over a VCC, llcEncap must be used. Specifying ipVcEncap or ipxVcEncap indicates that all the VCCs (i.e. AtmConnections) under an AtmMpe component will use VC based multiplexing and will carry IP or IPX PDUs only. Thus an IpxPort cannot be provisioned under a protocol port linked to an AtmMpe component with encapsulation type of ipVcEncap. Similarly, an IpPort cannot be provisioned under a protocol port linked to an AtmMpe component with encapsulation type of ipxVcEncap." DEFVAL { llcEncap } ::= { mscAtmMpeProvEntry 2 } mscAtmMpeIlsForwarder OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the IlsForwarder component this AtmMpe component is using." ::= { mscAtmMpeProvEntry 3 } mscAtmMpeMediaProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmMpeMediaProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the base provisioning data for the Atm Mpe component." ::= { mscAtmMpe 13 } mscAtmMpeMediaProvEntry OBJECT-TYPE SYNTAX MscAtmMpeMediaProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmMpeMediaProvTable." INDEX { mscAtmMpeIndex } ::= { mscAtmMpeMediaProvTable 1 } MscAtmMpeMediaProvEntry ::= SEQUENCE { mscAtmMpeLinkToProtocolPort Link } mscAtmMpeLinkToProtocolPort OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a protocol port component name. The attribute associates an AtmMpe application with a protocol port." ::= { mscAtmMpeMediaProvEntry 1 } mscAtmMpeStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmMpeStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscAtmMpe 14 } mscAtmMpeStateEntry OBJECT-TYPE SYNTAX MscAtmMpeStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmMpeStateTable." INDEX { mscAtmMpeIndex } ::= { mscAtmMpeStateTable 1 } MscAtmMpeStateEntry ::= SEQUENCE { mscAtmMpeAdminState INTEGER, mscAtmMpeOperationalState INTEGER, mscAtmMpeUsageState INTEGER } mscAtmMpeAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscAtmMpeStateEntry 1 } mscAtmMpeOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscAtmMpeStateEntry 2 } mscAtmMpeUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscAtmMpeStateEntry 3 } mscAtmMpeOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmMpeOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { mscAtmMpe 15 } mscAtmMpeOperStatusEntry OBJECT-TYPE SYNTAX MscAtmMpeOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmMpeOperStatusTable." INDEX { mscAtmMpeIndex } ::= { mscAtmMpeOperStatusTable 1 } MscAtmMpeOperStatusEntry ::= SEQUENCE { mscAtmMpeSnmpOperStatus INTEGER } mscAtmMpeSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mscAtmMpeOperStatusEntry 1 } -- AtmMpe/n Ac/n -- This component represents a virtual channel through which -- internetworking frames will be transported using rfc1483 -- encapsulation. The AtmConnection component contains OSI state -- information, frame based statistics, and the linkage to an ATM -- virtual channel connection. This component's instance value is used -- by higher-layer protocols when referring to a specific ATM -- connection. mscAtmMpeAc OBJECT IDENTIFIER ::= { mscAtmMpe 2 } mscAtmMpeAcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmMpeAcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mscAtmMpeAc components." ::= { mscAtmMpeAc 1 } mscAtmMpeAcRowStatusEntry OBJECT-TYPE SYNTAX MscAtmMpeAcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mscAtmMpeAc component." INDEX { mscAtmMpeIndex, mscAtmMpeAcIndex } ::= { mscAtmMpeAcRowStatusTable 1 } MscAtmMpeAcRowStatusEntry ::= SEQUENCE { mscAtmMpeAcRowStatus RowStatus, mscAtmMpeAcComponentName DisplayString, mscAtmMpeAcStorageType StorageType, mscAtmMpeAcIndex Integer32 } mscAtmMpeAcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mscAtmMpeAc components. These components can be added and deleted." ::= { mscAtmMpeAcRowStatusEntry 1 } mscAtmMpeAcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mscAtmMpeAcRowStatusEntry 2 } mscAtmMpeAcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mscAtmMpeAc tables." ::= { mscAtmMpeAcRowStatusEntry 4 } mscAtmMpeAcIndex OBJECT-TYPE SYNTAX Integer32 (1..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mscAtmMpeAc tables." ::= { mscAtmMpeAcRowStatusEntry 10 } mscAtmMpeAcProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmMpeAcProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for the AtmConnection component." ::= { mscAtmMpeAc 10 } mscAtmMpeAcProvEntry OBJECT-TYPE SYNTAX MscAtmMpeAcProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmMpeAcProvTable." INDEX { mscAtmMpeIndex, mscAtmMpeAcIndex } ::= { mscAtmMpeAcProvTable 1 } MscAtmMpeAcProvEntry ::= SEQUENCE { mscAtmMpeAcAtmConnection Link, mscAtmMpeAcIpCoS Unsigned32 } mscAtmMpeAcAtmConnection OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Atm nailed up endpoint, AtmIf/n Vcc/ vpi.vci Nep, that this connection is associated with." ::= { mscAtmMpeAcProvEntry 1 } mscAtmMpeAcIpCoS OBJECT-TYPE SYNTAX Unsigned32 (0..3) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Class of Service (CoS) given to each packet received on an ATM connection. The initial CoS given to a packet may be overridden when the cosPolicyAssignment attribute is defined on either the IpPort component of the ProtocolPort linked to the ATM MPE or the Ip component of the protocol port's VirtualRouter. When a packet is to be transmitted on an ATM MPE protocol port where multiple connections are available for the packet's next hop, the packet is forwarded on the connection where the ipCos value matches the CoS of the packet. When the packets' CoS does not match the ipCos value of any of the available connections, the packet is forwarded using next lowest CoS; failing this, the packet is forwarded using the next highest CoS." DEFVAL { 0 } ::= { mscAtmMpeAcProvEntry 2 } mscAtmMpeAcStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmMpeAcStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mscAtmMpeAc 11 } mscAtmMpeAcStateEntry OBJECT-TYPE SYNTAX MscAtmMpeAcStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmMpeAcStateTable." INDEX { mscAtmMpeIndex, mscAtmMpeAcIndex } ::= { mscAtmMpeAcStateTable 1 } MscAtmMpeAcStateEntry ::= SEQUENCE { mscAtmMpeAcAdminState INTEGER, mscAtmMpeAcOperationalState INTEGER, mscAtmMpeAcUsageState INTEGER } mscAtmMpeAcAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mscAtmMpeAcStateEntry 1 } mscAtmMpeAcOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mscAtmMpeAcStateEntry 2 } mscAtmMpeAcUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mscAtmMpeAcStateEntry 3 } mscAtmMpeAcOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmMpeAcOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes for the AtmConnection component." ::= { mscAtmMpeAc 12 } mscAtmMpeAcOperEntry OBJECT-TYPE SYNTAX MscAtmMpeAcOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmMpeAcOperTable." INDEX { mscAtmMpeIndex, mscAtmMpeAcIndex } ::= { mscAtmMpeAcOperTable 1 } MscAtmMpeAcOperEntry ::= SEQUENCE { mscAtmMpeAcSpeed Counter32 } mscAtmMpeAcSpeed OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the approximate bit rate for the connection. The bit rate is determined from the cell rate provisioned for the Vcc linked to this connection. The cell rate is multiplied by 53 bytes per cell and 8 bits per byte to obtain the bit rate. The ifSpeed of the entry in the ifTable corresponding to the AtmMpe component is the lowest speed of all the connections associated with the AtmMpe component." ::= { mscAtmMpeAcOperEntry 1 } mscAtmMpeAcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MscAtmMpeAcStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the frame based statistics maintained for the AtmConnection component. For cell based statistics, see the Vcc component." ::= { mscAtmMpeAc 13 } mscAtmMpeAcStatsEntry OBJECT-TYPE SYNTAX MscAtmMpeAcStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mscAtmMpeAcStatsTable." INDEX { mscAtmMpeIndex, mscAtmMpeAcIndex } ::= { mscAtmMpeAcStatsTable 1 } MscAtmMpeAcStatsEntry ::= SEQUENCE { mscAtmMpeAcOutPackets Counter32, mscAtmMpeAcOutOctets Counter32, mscAtmMpeAcOutDiscards Counter32, mscAtmMpeAcInPackets Counter32, mscAtmMpeAcInOctets Counter32, mscAtmMpeAcInUnknownProtos Counter32, mscAtmMpeAcInErrors Counter32 } mscAtmMpeAcOutPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets sent on this connection. This counter will wrap around to 0 when it exceeds its maximum count." ::= { mscAtmMpeAcStatsEntry 1 } mscAtmMpeAcOutOctets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of octets sent on this connection. This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION" ::= { mscAtmMpeAcStatsEntry 2 } mscAtmMpeAcOutDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets which were supposed to be sent on this connection but were discarded due to congestion or the connection being down. This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION" ::= { mscAtmMpeAcStatsEntry 3 } mscAtmMpeAcInPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets received on this connection. This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION" ::= { mscAtmMpeAcStatsEntry 4 } mscAtmMpeAcInOctets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The attribute counts the total number of octets received on this connection. This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION" ::= { mscAtmMpeAcStatsEntry 5 } mscAtmMpeAcInUnknownProtos OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets received on this connection which were discarded because they contained an unknown or unsupported protocol (includes packets received for protocols not currently bound to the associated ProtocolPort component). This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION" ::= { mscAtmMpeAcStatsEntry 6 } mscAtmMpeAcInErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets received on the connection which contained errors preventing them from being delivered to a higher-layer protocol (includes short frames). This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION" ::= { mscAtmMpeAcStatsEntry 7 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { mscAtmMpeComponentName, -- mscAtmMpeLinkToProtocolPort, -- mscAtmMpeAcInOctets, -- mscAtmMpeIfAdminStatus, -- mscAtmMpeAcInPackets, -- mscAtmMpeCustomerIdentifier, -- mscAtmMpeAcUsageState, -- mscAtmMpeEncapType, -- mscAtmMpeAcOutOctets, -- mscAtmMpeSnmpOperStatus, -- mscAtmMpeAcOutPackets, -- mscAtmMpeUsageState, -- mscAtmMpeAcStorageType, -- mscAtmMpeIfIndex, -- mscAtmMpeIlsForwarder, -- mscAtmMpeAcOperationalState, -- mscAtmMpeAcInUnknownProtos, -- mscAtmMpeStorageType, -- mscAtmMpeRowStatus, -- mscAtmMpeMaxTransmissionUnit, -- mscAtmMpeAcSpeed, -- mscAtmMpeOperationalState, -- mscAtmMpeAcOutDiscards, -- mscAtmMpeAcAdminState, -- mscAtmMpeAcComponentName, -- mscAtmMpeAcInErrors, -- mscAtmMpeAcIpCoS, -- mscAtmMpeAcAtmConnection, -- mscAtmMpeAcRowStatus, -- mscAtmMpeAdminState } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." atmMpeGroup OBJECT IDENTIFIER ::= { atmMpeMIB 1 } atmMpeGroupCA OBJECT IDENTIFIER ::= { atmMpeGroup 1 } atmMpeGroupCA02 OBJECT IDENTIFIER ::= { atmMpeGroupCA 3 } atmMpeGroupCA02A OBJECT IDENTIFIER ::= { atmMpeGroupCA02 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "MscPassport Release 1.2 AtmMpe." -- STATUS mandatory -- DESCRIPTION "Carrier Passport AtmMpe MIB: MIB Version CA02A, -- Software Version CA02S9C." -- SUPPORTS Nortel-MsCarrier-MscPassport-AtmMpeMIB -- INCLUDES { atmMpeGroupCA02A } atmMpeCapabilities OBJECT IDENTIFIER ::= { atmMpeMIB 3 } atmMpeCapabilitiesCA OBJECT IDENTIFIER ::= { atmMpeCapabilities 1 } atmMpeCapabilitiesCA02 OBJECT IDENTIFIER ::= { atmMpeCapabilitiesCA 3 } atmMpeCapabilitiesCA02A OBJECT IDENTIFIER ::= { atmMpeCapabilitiesCA02 2 } END