Nortel-MsCarrier-MscPassport-AtmMpeMIB :: mscAtmMpeAcIpCoS

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-MsCarrier-MscPassport-AtmMpeMIB › mscAtmMpeAcIpCoS

mscAtmMpeAcIpCoS

Module: Nortel-MsCarrier-MscPassport-AtmMpeMIB

OID (symbolic): Nortel-MsCarrier-MscPassport-AtmMpeMIB::mscAtmMpeAcIpCoS

OID (numeric): 1.3.6.1.4.1.562.36.2.1.118.2.10.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the Class of Service (CoS) given to each packet received on an ATM connection.

The initial CoS given to a packet may be overridden when the cosPolicyAssignment attribute is defined on either the IpPort component of the ProtocolPort linked to the ATM MPE or the Ip component of the protocol port's VirtualRouter.

When a packet is to be transmitted on an ATM MPE protocol port where multiple connections are available for the packet's next hop, the packet is forwarded on the connection where the ipCos value matches the CoS of the packet. When the packets' CoS does not match the ipCos value of any of the available connections, the packet is forwarded using next lowest CoS; failing this, the packet is forwarded using the next highest CoS.

What is mscAtmMpeAcIpCoS?

The Class of Service (0-3, default 0) assigned to packets received on this ATM connection. When multiple connections are available for a packet's next hop, the switch prefers the connection whose CoS matches the packet's, falling back to the next-lowest and then next-highest CoS if there's no exact match.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.118.2.10.1.2
snmpwalk -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmMpeMIB::mscAtmMpeAcIpCoS

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.36.2.1.118.2.10.1.2.1
snmpget -v2c -c public <target> Nortel-MsCarrier-MscPassport-AtmMpeMIB::mscAtmMpeAcIpCoS.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.36.2.1.118.2.10.1.2.1 i <value>

Start monitoring Nortel/Bay Networks Passport MscPassport carrier switch (ATM Multiprotocol Encapsulation) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-MsCarrier-MscPassport-AtmMpeMIB::mscAtmMpeAcIpCoS OID value, configure state conditions and alerts, and monitor any Nortel/Bay Networks Passport MscPassport carrier switch (ATM Multiprotocol Encapsulation) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.36msCarrierNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2mscPassportNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.36.2.1mscComponentsNortel-MsCarrier-MscPassport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.36.2.1.118mscAtmMpeNortel-MsCarrier-MscPassport-AtmMpeMIB
1.3.6.1.4.1.562.36.2.1.118.2mscAtmMpeAcNortel-MsCarrier-MscPassport-AtmMpeMIB
1.3.6.1.4.1.562.36.2.1.118.2.10mscAtmMpeAcProvTableNortel-MsCarrier-MscPassport-AtmMpeMIB
1.3.6.1.4.1.562.36.2.1.118.2.10.1mscAtmMpeAcProvEntryNortel-MsCarrier-MscPassport-AtmMpeMIB
1.3.6.1.4.1.562.36.2.1.118.2.10.1.2mscAtmMpeAcIpCoSNortel-MsCarrier-MscPassport-AtmMpeMIB