Nortel-Magellan-Passport-VnsMIB :: rtgVnsNodeNextHopLinkGroup2

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-Magellan-Passport-VnsMIBrtgVnsNodeNextHopLinkGroup2

rtgVnsNodeNextHopLinkGroup2

Module: Nortel-Magellan-Passport-VnsMIB

OID (symbolic): Nortel-Magellan-Passport-VnsMIB::rtgVnsNodeNextHopLinkGroup2

OID (numeric): 1.3.6.1.4.1.562.2.4.1.40.3.2.10.1.3

Node type: OBJECT-TYPE

Type: RowPointer

Access: read-only

Description: The second possible link group available that can be used to reach a neighbour which is the next hop in the path to the destination Node for the specified Class of Service (COS). VNS traffic is routed deterministically across the links in up to two link groups, when available. If only one link group is available this attribute will be left blank. The link groups selected are those associated with minimum metric COS paths to the destination. If two link groups are in use then the metric of the paths associated with each are identical.

Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it.

What is rtgVnsNodeNextHopLinkGroup2?

This is intended to point to a second, equally-costed link group usable to reach the next-hop neighbour toward a destination node, left blank if only one link group is available; the MIB marks this table's subtree as currently not implemented. An admin should not rely on this object for live next-hop data given the not-implemented status noted in the source MIB.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.3.2.10.1.3
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VnsMIB::rtgVnsNodeNextHopLinkGroup2

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.3.2.10.1.3.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-VnsMIB::rtgVnsNodeNextHopLinkGroup2.1

Start monitoring Nortel Magellan Passport WAN switch, legacy (Virtual Networking Services) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VnsMIB::rtgVnsNodeNextHopLinkGroup2 OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch, legacy (Virtual Networking Services) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.40rtgNortel-Magellan-Passport-BaseRoutingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.40.3rtgVnsNortel-Magellan-Passport-VnsMIB
1.3.6.1.4.1.562.2.4.1.40.3.2rtgVnsNodeNortel-Magellan-Passport-VnsMIB
1.3.6.1.4.1.562.2.4.1.40.3.2.10rtgVnsNodeOperTableNortel-Magellan-Passport-VnsMIB
1.3.6.1.4.1.562.2.4.1.40.3.2.10.1rtgVnsNodeOperEntryNortel-Magellan-Passport-VnsMIB
1.3.6.1.4.1.562.2.4.1.40.3.2.10.1.3rtgVnsNodeNextHopLinkGroup2Nortel-Magellan-Passport-VnsMIB