Nortel-Magellan-Passport-VnsMIB :: rtgVnsNodeNextHopLinkGroup1

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-Magellan-Passport-VnsMIBrtgVnsNodeNextHopLinkGroup1

rtgVnsNodeNextHopLinkGroup1

Module: Nortel-Magellan-Passport-VnsMIB

OID (symbolic): Nortel-Magellan-Passport-VnsMIB::rtgVnsNodeNextHopLinkGroup1

OID (numeric): 1.3.6.1.4.1.562.2.4.1.40.3.2.10.1.2

Node type: OBJECT-TYPE

Type: RowPointer

Access: read-only

Description: The first possible link group available that can be used to reach a neighbour which is the next hop in the path to the destination Node for the throughput Class of Service (COS). VNS traffic is routed deterministically across the links in up to two link groups, when available. The link groups selected are those associated with minimum metric COS paths to the destination. If two link groups are in use then the metric of the paths associated with each are identical.

If no link groups are listed then the destination is not reachable (except in the case of the local node's Id).

Link group instances are managed by the TransportResource component. Further information about the links in the group can be obtained from it.

What is rtgVnsNodeNextHopLinkGroup1?

This is intended to point to the first link group usable to reach the next-hop neighbour toward a destination node for the throughput class of service, with an empty value meaning the destination is unreachable; the MIB marks this table's subtree as currently not implemented. An admin should not rely on this object for live next-hop data given the not-implemented status noted in the source MIB.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.3.2.10.1.2
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-VnsMIB::rtgVnsNodeNextHopLinkGroup1

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.3.2.10.1.2.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-VnsMIB::rtgVnsNodeNextHopLinkGroup1.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rtgVnsNodeNextHopLinkGroup1.1

Start monitoring Nortel Magellan Passport WAN switch, legacy (Virtual Networking Services) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-VnsMIB::rtgVnsNodeNextHopLinkGroup1 OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch, legacy (Virtual Networking Services) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.40rtgNortel-Magellan-Passport-BaseRoutingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.40.3rtgVnsNortel-Magellan-Passport-VnsMIB
1.3.6.1.4.1.562.2.4.1.40.3.2rtgVnsNodeNortel-Magellan-Passport-VnsMIB
1.3.6.1.4.1.562.2.4.1.40.3.2.10rtgVnsNodeOperTableNortel-Magellan-Passport-VnsMIB
1.3.6.1.4.1.562.2.4.1.40.3.2.10.1rtgVnsNodeOperEntryNortel-Magellan-Passport-VnsMIB
1.3.6.1.4.1.562.2.4.1.40.3.2.10.1.2rtgVnsNodeNextHopLinkGroup1Nortel-Magellan-Passport-VnsMIB