Nortel-Magellan-Passport-SubnetInterfaceMIB :: modVcsCallSetupTimer

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-SubnetInterfaceMIB › modVcsCallSetupTimer

modVcsCallSetupTimer

Module: Nortel-Magellan-Passport-SubnetInterfaceMIB

OID (symbolic): Nortel-Magellan-Passport-SubnetInterfaceMIB::modVcsCallSetupTimer

OID (numeric): 1.3.6.1.4.1.562.2.4.1.16.2.13.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the Vc callSetupTimer in units of 1 second ticks. This timer specifies how long the Vc will wait, after sending a subnet Call Request packet into the network, for a response from the remote end of the Vc (in the form of a subnet Raccept packet). If, after sending a subnet Call packet into the network, a response is not received within this time period, the Vc will time out, clearing the call in the assumption that the remote end is unreachable. This timer must be long enough to take into account the time required for routing the subnet Call Request through the Source Call Routing and the Destination Call Routing systems in order to be delivered to the final destination.

What is modVcsCallSetupTimer?

Sets, in seconds (5-100, default 5), how long a virtual circuit waits for a call-accept response after sending a Call Request before timing out and clearing the call as unreachable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.16.2.13.1.3
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-SubnetInterfaceMIB::modVcsCallSetupTimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.16.2.13.1.3.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-SubnetInterfaceMIB::modVcsCallSetupTimer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.16.2.13.1.3.1 i <value>

Start monitoring Nortel Magellan Passport switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-SubnetInterfaceMIB::modVcsCallSetupTimer OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switches from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.16modNortel-Magellan-Passport-ShelfMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.16.2modVcsNortel-Magellan-Passport-SubnetInterfaceMIB
1.3.6.1.4.1.562.2.4.1.16.2.13modVcsIntOptTableNortel-Magellan-Passport-SubnetInterfaceMIB
1.3.6.1.4.1.562.2.4.1.16.2.13.1modVcsIntOptEntryNortel-Magellan-Passport-SubnetInterfaceMIB
1.3.6.1.4.1.562.2.4.1.16.2.13.1.3modVcsCallSetupTimerNortel-Magellan-Passport-SubnetInterfaceMIB