Nortel-Magellan-Passport-PorsVcMIB :: rtgRsRouteSelectionAttributes

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-Magellan-Passport-PorsVcMIBrtgRsRouteSelectionAttributes

rtgRsRouteSelectionAttributes

Module: Nortel-Magellan-Passport-PorsVcMIB

OID (symbolic): Nortel-Magellan-Passport-PorsVcMIB::rtgRsRouteSelectionAttributes

OID (numeric): 1.3.6.1.4.1.562.2.4.1.40.2.11.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute acts as a 2-position switch, allowing an operator to specify whether the route selection attributes kept by the RouteSelector should be as he/she set them: routeSelectionAttributes = fromOperator, or the route selection attributes could be updated automatically to contain the route selection attributes of the last automatic route request: routeSelectionAttributes = fromLastRouteRequest.

What is rtgRsRouteSelectionAttributes?

A two-position switch selecting whether the route-selection parameters RouteSelector uses come from what the operator explicitly configured (fromOperator) or are automatically refreshed from the most recent automatic route request (fromLastRouteRequest). Set it to fromLastRouteRequest when you want manual troubleshooting to mirror exactly what a live service just requested.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.2.11.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-PorsVcMIB::rtgRsRouteSelectionAttributes

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.2.11.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-PorsVcMIB::rtgRsRouteSelectionAttributes.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.40.2.11.1.1.1 i <value>

Start monitoring Nortel Magellan Passport WAN switch (PORS virtual-circuit route selection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-PorsVcMIB::rtgRsRouteSelectionAttributes OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (PORS virtual-circuit route selection) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.40rtgNortel-Magellan-Passport-BaseRoutingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.40.2rtgRsNortel-Magellan-Passport-PorsVcMIB
1.3.6.1.4.1.562.2.4.1.40.2.11rtgRsControlsTableNortel-Magellan-Passport-PorsVcMIB
1.3.6.1.4.1.562.2.4.1.40.2.11.1rtgRsControlsEntryNortel-Magellan-Passport-PorsVcMIB
1.3.6.1.4.1.562.2.4.1.40.2.11.1.1rtgRsRouteSelectionAttributesNortel-Magellan-Passport-PorsVcMIB