Nortel-Magellan-Passport-PorsVcMIB :: rtgRsBumpPreference

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-Magellan-Passport-PorsVcMIBrtgRsBumpPreference

rtgRsBumpPreference

Module: Nortel-Magellan-Passport-PorsVcMIB

OID (symbolic): Nortel-Magellan-Passport-PorsVcMIB::rtgRsBumpPreference

OID (numeric): 1.3.6.1.4.1.562.2.4.1.40.2.12.1.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute indicates whether bumping may be considered when selecting a route. By default, bumping may be considered only when it is necessary. That is, only when no other route to the destination or gateway node can be found An indication to always bump in order to find the best route may be set. In this case an absolutely best route to the destination or gateway node is found even if other paths along that route would need bumping.

What is rtgRsBumpPreference?

Controls how aggressively RouteSelector may bump lower-priority existing paths: by default only when necessary to find any route at all, or always in order to find the absolute best route even if bumping wasn't strictly required. Use the always-bump setting sparingly, since it can disrupt other lower-priority traffic just to optimize this one route.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.2.12.1.14
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-PorsVcMIB::rtgRsBumpPreference

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.2.12.1.14.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-PorsVcMIB::rtgRsBumpPreference.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.40.2.12.1.14.1 i <value>

Start monitoring Nortel Magellan Passport WAN switch (PORS virtual-circuit route selection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-PorsVcMIB::rtgRsBumpPreference OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (PORS virtual-circuit route selection) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.40rtgNortel-Magellan-Passport-BaseRoutingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.40.2rtgRsNortel-Magellan-Passport-PorsVcMIB
1.3.6.1.4.1.562.2.4.1.40.2.12rtgRsPathAttributesTableNortel-Magellan-Passport-PorsVcMIB
1.3.6.1.4.1.562.2.4.1.40.2.12.1rtgRsPathAttributesEntryNortel-Magellan-Passport-PorsVcMIB
1.3.6.1.4.1.562.2.4.1.40.2.12.1.14rtgRsBumpPreferenceNortel-Magellan-Passport-PorsVcMIB