All MIBs › Nortel-Magellan-Passport-PorsVcMIB › rtgPorsProfSetupPriority
rtgPorsProfSetupPriority
Module: Nortel-Magellan-Passport-PorsVcMIB
OID (symbolic): Nortel-Magellan-Passport-PorsVcMIB::rtgPorsProfSetupPriority
OID (numeric): 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the priority at which a path is established. Zero is the highest priority and four is the lowest. When PORS establishes a path through the network, it uses the setupPriority attribute to determine its potential for bumping established paths to acquire their bandwidth. The holdingPriority, a complementary attribute of this attribute, specifies the priority a path maintains once it is established. A new path can bump an existing path if the new path's setupPriority is higher (numerically less) than the existing path's holdingPriority.
What is rtgPorsProfSetupPriority?
Sets the priority (0 highest, 4 lowest) a path using this profile requires at establishment time, determining its ability to bump other established paths for bandwidth. A path can bump an existing one only if its setupPriority numerically beats the existing path's holdingPriority.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.3 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-PorsVcMIB::rtgPorsProfSetupPriority
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.3.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-PorsVcMIB::rtgPorsProfSetupPriority.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.3.1 i <value>
Start monitoring Nortel Magellan Passport WAN switch (PORS virtual-circuit route selection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-PorsVcMIB::rtgPorsProfSetupPriority OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (PORS virtual-circuit route selection) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.40 | rtg | Nortel-Magellan-Passport-BaseRoutingMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.40.6 | rtgPors | Nortel-Magellan-Passport-PorsVcMIB |
| 1.3.6.1.4.1.562.2.4.1.40.6.7 | rtgPorsProf | Nortel-Magellan-Passport-PorsVcMIB |
| 1.3.6.1.4.1.562.2.4.1.40.6.7.11 | rtgPorsProfProvTable | Nortel-Magellan-Passport-PorsVcMIB |
| 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1 | rtgPorsProfProvEntry | Nortel-Magellan-Passport-PorsVcMIB |
| 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.3 | rtgPorsProfSetupPriority | Nortel-Magellan-Passport-PorsVcMIB |