Nortel-Magellan-Passport-PorsVcMIB :: rtgPorsProfHoldingPriority

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNortel-Magellan-Passport-PorsVcMIBrtgPorsProfHoldingPriority

rtgPorsProfHoldingPriority

Module: Nortel-Magellan-Passport-PorsVcMIB

OID (symbolic): Nortel-Magellan-Passport-PorsVcMIB::rtgPorsProfHoldingPriority

OID (numeric): 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.4

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the priority that a path holds once it is established. Zero is the highest priority and four is the lowest. A path's holdingPriority determines this path's likelihood of being bumped by a new path to acquire its bandwidth. The setupPriority, a complementary attribute, indicates the priority of a path at establishment time. A new path can bump an existing path if the new path's setupPriority is higher (numerically less) than the existing path's holdingPriority.

What is rtgPorsProfHoldingPriority?

Sets the priority (0 highest, 4 lowest) a path using this profile retains once established, determining how vulnerable it is to being bumped by a new higher-priority path. Raise it (toward 0) for connections that must not be sacrificed to free bandwidth for other traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.4
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-PorsVcMIB::rtgPorsProfHoldingPriority

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.4.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-PorsVcMIB::rtgPorsProfHoldingPriority.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.4.1 i <value>

Start monitoring Nortel Magellan Passport WAN switch (PORS virtual-circuit route selection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-PorsVcMIB::rtgPorsProfHoldingPriority OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (PORS virtual-circuit route selection) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.40rtgNortel-Magellan-Passport-BaseRoutingMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.40.6rtgPorsNortel-Magellan-Passport-PorsVcMIB
1.3.6.1.4.1.562.2.4.1.40.6.7rtgPorsProfNortel-Magellan-Passport-PorsVcMIB
1.3.6.1.4.1.562.2.4.1.40.6.7.11rtgPorsProfProvTableNortel-Magellan-Passport-PorsVcMIB
1.3.6.1.4.1.562.2.4.1.40.6.7.11.1rtgPorsProfProvEntryNortel-Magellan-Passport-PorsVcMIB
1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.4rtgPorsProfHoldingPriorityNortel-Magellan-Passport-PorsVcMIB