All MIBs › Nortel-Magellan-Passport-PorsVcMIB › rtgPorsProfBumpPreference
rtgPorsProfBumpPreference
Module: Nortel-Magellan-Passport-PorsVcMIB
OID (symbolic): Nortel-Magellan-Passport-PorsVcMIB::rtgPorsProfBumpPreference
OID (numeric): 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.18
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies when bumping may be triggered as a result of this call being routed/rerouted or optimized. There are two possibilities: bumpWhenNecessary: means that this call will only trigger the bumping of another call (subject to setup/holding priority restrictions) when there is no other way to establish a route for this call. bumpToObtainBestRoute: means that this call may trigger the bumping of other calls (subject to setup/holding priority restrictions) if doing so would result in this call obtaining a better (lower cost/delay) route. Since bumping to obtain the best route can be somewhat intrusive the default is only to bump when there is no other way to route the call.
What is rtgPorsProfBumpPreference?
Selects when bumping other calls is allowed for connections on this profile: bumpWhenNecessary (default, only if there's no other way to route this call) or bumpToObtainBestRoute (bump other calls even just to get a better route for this one). Reserve bumpToObtainBestRoute for high-priority traffic where you accept some disruption to other calls in exchange for the optimal route.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.18 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-PorsVcMIB::rtgPorsProfBumpPreference
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.18.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-PorsVcMIB::rtgPorsProfBumpPreference.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.18.1 i <value>
Start monitoring Nortel Magellan Passport WAN switch (PORS virtual-circuit route selection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-PorsVcMIB::rtgPorsProfBumpPreference OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (PORS virtual-circuit route selection) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.40 | rtg | Nortel-Magellan-Passport-BaseRoutingMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.40.6 | rtgPors | Nortel-Magellan-Passport-PorsVcMIB |
| 1.3.6.1.4.1.562.2.4.1.40.6.7 | rtgPorsProf | Nortel-Magellan-Passport-PorsVcMIB |
| 1.3.6.1.4.1.562.2.4.1.40.6.7.11 | rtgPorsProfProvTable | Nortel-Magellan-Passport-PorsVcMIB |
| 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1 | rtgPorsProfProvEntry | Nortel-Magellan-Passport-PorsVcMIB |
| 1.3.6.1.4.1.562.2.4.1.40.6.7.11.1.18 | rtgPorsProfBumpPreference | Nortel-Magellan-Passport-PorsVcMIB |