Nortel-Magellan-Passport-PorsTrunksMIB :: trkPaAdaptationBandwidth

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-PorsTrunksMIB › trkPaAdaptationBandwidth

trkPaAdaptationBandwidth

Module: Nortel-Magellan-Passport-PorsTrunksMIB

OID (symbolic): Nortel-Magellan-Passport-PorsTrunksMIB::trkPaAdaptationBandwidth

OID (numeric): 1.3.6.1.4.1.562.2.4.1.60.4.12.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the amount of bandwidth to be potentially freed up by rerouting connections if possible or freed up by bumping connections on the trunk when the second or third degree of adaptation is triggered.

The adaptationBandwidth value is used to determine the number of connections to be rerouted or bumped starting from the lowest holdingPriority, such that the total of the chosen connections reserved outgoing bandwidth requiredTxBandwidth reaches this adaptationBandwidth value.

If its value is greater than the maxReservableBwOut of Trunk/n Pa, the maxReservableBwOut amount of bandwidth is used for rerouting or bumping.

What is trkPaAdaptationBandwidth?

The amount of bandwidth, default 64000 bits per second, that adaptation should try to free up by rerouting or bumping low-priority connections when the second or third adaptation degree triggers; if it exceeds the trunk's max reservable bandwidth, the whole reservable amount is used instead.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.60.4.12.1.2
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-PorsTrunksMIB::trkPaAdaptationBandwidth

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.60.4.12.1.2.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-PorsTrunksMIB::trkPaAdaptationBandwidth.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.60.4.12.1.2.1 i <value>

Start monitoring Nortel Magellan Passport WAN switch (Packet-over-Ring Service trunks) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-PorsTrunksMIB::trkPaAdaptationBandwidth OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (Packet-over-Ring Service trunks) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.60trkNortel-Magellan-Passport-TrunksMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.60.4trkPaNortel-Magellan-Passport-PorsTrunksMIB
1.3.6.1.4.1.562.2.4.1.60.4.12trkPaAdaptationTableNortel-Magellan-Passport-PorsTrunksMIB
1.3.6.1.4.1.562.2.4.1.60.4.12.1trkPaAdaptationEntryNortel-Magellan-Passport-PorsTrunksMIB
1.3.6.1.4.1.562.2.4.1.60.4.12.1.2trkPaAdaptationBandwidthNortel-Magellan-Passport-PorsTrunksMIB