Nortel-Magellan-Passport-PorsTrunksMIB :: trkLChSetupPriority

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-PorsTrunksMIB › trkLChSetupPriority

trkLChSetupPriority

Module: Nortel-Magellan-Passport-PorsTrunksMIB

OID (symbolic): Nortel-Magellan-Passport-PorsTrunksMIB::trkLChSetupPriority

OID (numeric): 1.3.6.1.4.1.562.2.4.1.60.5.10.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: This attribute gives the priority at which a path is established. Zero (0) is the highest priority and four (4) is the lowest. When PORS establishes a path through the network, it uses the setupPriority attribute to determine its potential for bumping established paths to acquire their bandwidth. The holdingPriority, a complementary attribute of this component, indicates the priority a path maintains once it is established. A new path can bump an existing path if the new path's setupPriority is higher (or numerically less) than the existing path's holdingPriority.

What is trkLChSetupPriority?

The priority (0=highest, 4=lowest) used when this path was first established, determining its ability to bump other existing paths to acquire bandwidth; a new path can bump an existing one if its setupPriority outranks the existing path's holdingPriority. Per this MIB revision this table is not yet implemented.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.60.5.10.1.3
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-PorsTrunksMIB::trkLChSetupPriority

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.60.5.10.1.3.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-PorsTrunksMIB::trkLChSetupPriority.1

Start monitoring Nortel Magellan Passport WAN switch (Packet-over-Ring Service trunks) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-PorsTrunksMIB::trkLChSetupPriority OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (Packet-over-Ring Service trunks) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.60trkNortel-Magellan-Passport-TrunksMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.60.5trkLChNortel-Magellan-Passport-PorsTrunksMIB
1.3.6.1.4.1.562.2.4.1.60.5.10trkLChOperTableNortel-Magellan-Passport-PorsTrunksMIB
1.3.6.1.4.1.562.2.4.1.60.5.10.1trkLChOperEntryNortel-Magellan-Passport-PorsTrunksMIB
1.3.6.1.4.1.562.2.4.1.60.5.10.1.3trkLChSetupPriorityNortel-Magellan-Passport-PorsTrunksMIB