Nortel-Magellan-Passport-DisdnJapanInsMIB

All MIBs › Nortel-Magellan-Passport-DisdnJapanInsMIB

Category: Telephony/VoIP

Description: Manages Nortel Magellan Passport ISDN Japan INS-Net signaling protocol configuration and state.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Nortel-Magellan-Passport-DisdnJapanInsMIB?

Nortel-Magellan-Passport-DisdnJapanInsMIB is a Nortel proprietary MIB for the Magellan Passport WAN switching platform, specifically managing the Japanese ISDN INS-Net variant of D-channel signaling. It exposes configuration and status objects for the data signaling channel, including row-status control tables, Layer 2 framer parameters, and protocol timers (T200, T23) and retry counters (N200) governing the signaling link. Its monitoring value lies in software/protocol status: confirming whether a signaling channel's row status is active, checking the framer state, and verifying that Layer 2 timer/retry parameters match the expected INS-Net configuration to catch link instability. It depends on Nortel's broader Magellan Passport ISDN signaling channel MIB framework, of which this is the Japan INS-Net-specific extension. It is deployed on Nortel Magellan Passport multiservice WAN switches providing ISDN access in Japan-market telecom networks. Engineers can download the Nortel-Magellan-Passport-DisdnJapanInsMIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-Magellan-Passport-DisdnJapanInsMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nortel Magellan Passport WAN switch

Monitoring Examples

An operator would check dataSigChanInsRowStatus in the dataSigChanInsRowStatusTable to confirm a given INS-Net signaling channel is active, and inspect dataSigChanInsL2Table entries such as dataSigChanInsT200 and dataSigChanInsN200 to verify the Layer 2 timer and retransmission counts are within expected bounds. A channel repeatedly hitting its N200 retry limit or showing an unexpected dataSigChanInsFramer state would indicate a physical or signaling-level ISDN link problem needing investigation.

What Can Be Monitored

signaling channel row status
Layer 2 framer state
T200/T23 protocol timers
N200 retry count
channel storage type/index

Imported Objects

From Nortel-Magellan-Passport-DataIsdnMIB

dataSigChan	OBJECT-IDENTITY
dataSigChanIndex	OBJECT-TYPE

From Nortel-Magellan-Passport-StandardTextualConventionsMIB

DisplayString
RowStatus
StorageType
Unsigned32

From Nortel-Magellan-Passport-TextualConventionsMIB

Link
NonReplicated

From Nortel-Magellan-Passport-UsefulDefinitionsMIB

passportMIBs

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
dataSigChanIns	1.3.6.1.4.1.562.2.4.1.120.11
dataSigChanInsRowStatusTable	1.3.6.1.4.1.562.2.4.1.120.11.1		not-accessible	This entry controls the addition and deletion of dataSigChanIns components.
dataSigChanInsRowStatusEntry	1.3.6.1.4.1.562.2.4.1.120.11.1.1		not-accessible	A single entry in the table represents a single dataSigChanIns component.
ROW dataSigChanInsRowStatus	1.3.6.1.4.1.562.2.4.1.120.11.1.1.1	RowStatus	read-write	This variable is used as the basis for SNMP naming of dataSigChanIns components. These components can be added and deleted.
STR dataSigChanInsComponentName	1.3.6.1.4.1.562.2.4.1.120.11.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO dataSigChanInsStorageType	1.3.6.1.4.1.562.2.4.1.120.11.1.1.4	StorageType	read-only	This variable represents the storage type value for the dataSigChanIns tables.
NON dataSigChanInsIndex	1.3.6.1.4.1.562.2.4.1.120.11.1.1.10	NonReplicated	not-accessible	This variable represents the index for the dataSigChanIns tables.
dataSigChanInsFramer	1.3.6.1.4.1.562.2.4.1.120.11.2
dataSigChanInsFramerRowStatusTable	1.3.6.1.4.1.562.2.4.1.120.11.2.1		not-accessible	This entry controls the addition and deletion of dataSigChanInsFramer components.
dataSigChanInsFramerRowStatusEntry	1.3.6.1.4.1.562.2.4.1.120.11.2.1.1		not-accessible	A single entry in the table represents a single dataSigChanInsFramer component.
ROW dataSigChanInsFramerRowStatus	1.3.6.1.4.1.562.2.4.1.120.11.2.1.1.1	RowStatus	read-only	This variable is used as the basis for SNMP naming of dataSigChanInsFramer components. These components cannot be added nor deleted.
STR dataSigChanInsFramerComponentName	1.3.6.1.4.1.562.2.4.1.120.11.2.1.1.2	DisplayString	read-only	This variable provides the component's string name for use with the ASCII Console Interface
STO dataSigChanInsFramerStorageType	1.3.6.1.4.1.562.2.4.1.120.11.2.1.1.4	StorageType	read-only	This variable represents the storage type value for the dataSigChanInsFramer tables.
NON dataSigChanInsFramerIndex	1.3.6.1.4.1.562.2.4.1.120.11.2.1.1.10	NonReplicated	not-accessible	This variable represents the index for the dataSigChanInsFramer tables.
dataSigChanInsFramerProvTable	1.3.6.1.4.1.562.2.4.1.120.11.2.10		not-accessible	This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.
dataSigChanInsFramerProvEntry	1.3.6.1.4.1.562.2.4.1.120.11.2.10.1		not-accessible	An entry in the dataSigChanInsFramerProvTable.
LIN dataSigChanInsFramerInterfaceName	1.3.6.1.4.1.562.2.4.1.120.11.2.10.1.1	Link	read-write	This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.
dataSigChanInsFramerStateTable	1.3.6.1.4.1.562.2.4.1.120.11.2.12		not-accessible	This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide.
dataSigChanInsFramerStateEntry	1.3.6.1.4.1.562.2.4.1.120.11.2.12.1		not-accessible	An entry in the dataSigChanInsFramerStateTable.
INT dataSigChanInsFramerAdminState	1.3.6.1.4.1.562.2.4.1.120.11.2.12.1.1	INTEGER	read-only	This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component.
INT dataSigChanInsFramerOperationalState	1.3.6.1.4.1.562.2.4.1.120.11.2.12.1.2	INTEGER	read-only	This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.
INT dataSigChanInsFramerUsageState	1.3.6.1.4.1.562.2.4.1.120.11.2.12.1.3	INTEGER	read-only	This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time.
dataSigChanInsFramerStatsTable	1.3.6.1.4.1.562.2.4.1.120.11.2.13		not-accessible	This group contains the operational statistics data for a Framer component.
dataSigChanInsFramerStatsEntry	1.3.6.1.4.1.562.2.4.1.120.11.2.13.1		not-accessible	An entry in the dataSigChanInsFramerStatsTable.
U32 dataSigChanInsFramerFrmToIf	1.3.6.1.4.1.562.2.4.1.120.11.2.13.1.1	Unsigned32	read-only	This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value.
U32 dataSigChanInsFramerFrmFromIf	1.3.6.1.4.1.562.2.4.1.120.11.2.13.1.2	Unsigned32	read-only	This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value.
U32 dataSigChanInsFramerOctetFromIf	1.3.6.1.4.1.562.2.4.1.120.11.2.13.1.3	Unsigned32	read-only	The number of bytes received from the link interface by Framer.
U32 dataSigChanInsFramerAborts	1.3.6.1.4.1.562.2.4.1.120.11.2.13.1.4	Unsigned32	read-only	This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value.
U32 dataSigChanInsFramerCrcErrors	1.3.6.1.4.1.562.2.4.1.120.11.2.13.1.5	Unsigned32	read-only	This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value.
U32 dataSigChanInsFramerLrcErrors	1.3.6.1.4.1.562.2.4.1.120.11.2.13.1.6	Unsigned32	read-only	This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value.
U32 dataSigChanInsFramerNonOctetErrors	1.3.6.1.4.1.562.2.4.1.120.11.2.13.1.7	Unsigned32	read-only	This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value.
U32 dataSigChanInsFramerOverruns	1.3.6.1.4.1.562.2.4.1.120.11.2.13.1.8	Unsigned32	read-only	This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value.
U32 dataSigChanInsFramerUnderruns	1.3.6.1.4.1.562.2.4.1.120.11.2.13.1.9	Unsigned32	read-only	This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum value.
U32 dataSigChanInsFramerLargeFrmErrors	1.3.6.1.4.1.562.2.4.1.120.11.2.13.1.10	Unsigned32	read-only	This attribute counts the total number of frames received which were too large. The frame was longer than 500 bytes. This count wraps to zero after reaching its maximum value.
dataSigChanInsL2Table	1.3.6.1.4.1.562.2.4.1.120.11.11		not-accessible	This group represents the provisionable Layer 2 attributes of the Q931 CCITT protocol.
dataSigChanInsL2Entry	1.3.6.1.4.1.562.2.4.1.120.11.11.1		not-accessible	An entry in the dataSigChanInsL2Table.
U32 dataSigChanInsT23	1.3.6.1.4.1.562.2.4.1.120.11.11.1.1	Unsigned32	read-write	This attribute specifies the layer2 enable request timer.
U32 dataSigChanInsT200	1.3.6.1.4.1.562.2.4.1.120.11.11.1.2	Unsigned32	read-write	This attribute specifies the maximum time between a layer 2 frame and its acknowledgement
U32 dataSigChanInsN200	1.3.6.1.4.1.562.2.4.1.120.11.11.1.3	Unsigned32	read-write	This attribute specifies the maximum number of re-transmissions of a layer2 frame.
U32 dataSigChanInsT203	1.3.6.1.4.1.562.2.4.1.120.11.11.1.4	Unsigned32	read-write	This attribute specifies the maximum time that a no layer 2 traffic situation can last. Expiry triggers a check on whether the far end is a live.
U32 dataSigChanInsN201	1.3.6.1.4.1.562.2.4.1.120.11.11.1.5	Unsigned32	read-write	This attribute specifies the maximum number of octets in an information field.
U32 dataSigChanInsCircuitSwitchedK	1.3.6.1.4.1.562.2.4.1.120.11.11.1.6	Unsigned32	read-write	This attribute specifies the maximum number of frames for B channel use.
dataSigChanInsProvTable	1.3.6.1.4.1.562.2.4.1.120.11.13		not-accessible	This group defines the general options of the d-channel signalling link.
dataSigChanInsProvEntry	1.3.6.1.4.1.562.2.4.1.120.11.13.1		not-accessible	An entry in the dataSigChanInsProvTable.
INT dataSigChanInsSide	1.3.6.1.4.1.562.2.4.1.120.11.13.1.1	INTEGER	read-write	This attribute specifies whether the layer 2 HDLC interface is the network or user side of the connection.
dataSigChanInsOperTable	1.3.6.1.4.1.562.2.4.1.120.11.15		not-accessible	This group provides the operational attributes for the signalling protocol.
dataSigChanInsOperEntry	1.3.6.1.4.1.562.2.4.1.120.11.15.1		not-accessible	An entry in the dataSigChanInsOperTable.
U32 dataSigChanInsActiveChannels	1.3.6.1.4.1.562.2.4.1.120.11.15.1.1	Unsigned32	read-only	This attribute indicates the number of currently active channels. This includes data and voice channels.
U32 dataSigChanInsPeakActiveChannels	1.3.6.1.4.1.562.2.4.1.120.11.15.1.4	Unsigned32	read-only	This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period.
INT dataSigChanInsDChanStatus	1.3.6.1.4.1.562.2.4.1.120.11.15.1.7	INTEGER	read-only	This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is enabled. If the signalling channel stays in the established state, then it is waiting for a restart from the PBX. enabling means that the resources for processing calls are being initialized. If the signalling channel stays in the enabling state then it is waiting for a restart acknowledgement from the PBX. inService means that the resources for processing calls are available. restarting means that the resources for call processing are being rei- initialized.
dataSigChanInsToolsTable	1.3.6.1.4.1.562.2.4.1.120.11.16		not-accessible	This group contains a series of operational attributes which turn on and off several kinds of tracing.
dataSigChanInsToolsEntry	1.3.6.1.4.1.562.2.4.1.120.11.16.1		not-accessible	An entry in the dataSigChanInsToolsTable.
OCT dataSigChanInsTracing	1.3.6.1.4.1.562.2.4.1.120.11.16.1.1	OCTET STRING	read-write	This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueue attribute in Col/debug must be greater than 0 and a Telnet NMIS session must list the debug stream in in its data streams (ex. set nmis telnet session/1 dataStreams debug). Different types of tracing can be enabled simultaneously. Note that tracing consumes additional CPU resources and will slow down call processing on a heavily loaded card. If there is message block exhaustion tracing will be suspended for a period and then automatically reenabled. An alarm is generated on tracing suspension and resumption. This mechanism protects the function processor against excessive numbers of tracing messages. Types of tracing include: protocolErrors - get details of any protocol errors which are occuring. Protocol errors are also reported in summary form as alarms. q931Summary - Summary of the Q.931 messages on the signalling link, including certain call details (calling number, called number, release codes). q931Hex - Q.931 messages displayed in hex format. Useful to determine protocol compliance in case of errors reported on local or remote ends. q931Symbolic - Q.931 messages parsed to give maximum detail. Useful for understanding content of messages flowing on the link. portHex - Messages in hex format being sent and received on the link. Description of bits: protocolErrors(0) q931Summary(1) q931Hex(2) q931Symbolic(3) portHex(4)
disdnJapanInsMIB	1.3.6.1.4.1.562.2.4.2.118
disdnJapanInsGroup	1.3.6.1.4.1.562.2.4.2.118.1
disdnJapanInsGroupBE	1.3.6.1.4.1.562.2.4.2.118.1.5
disdnJapanInsGroupBE00	1.3.6.1.4.1.562.2.4.2.118.1.5.1
disdnJapanInsGroupBE00A	1.3.6.1.4.1.562.2.4.2.118.1.5.1.2
disdnJapanInsCapabilities	1.3.6.1.4.1.562.2.4.2.118.3
disdnJapanInsCapabilitiesBE	1.3.6.1.4.1.562.2.4.2.118.3.5
disdnJapanInsCapabilitiesBE00	1.3.6.1.4.1.562.2.4.2.118.3.5.1
disdnJapanInsCapabilitiesBE00A	1.3.6.1.4.1.562.2.4.2.118.3.5.1.2

RFC description

Manages the operational characteristics and signaling channel configuration for Japan ISDN (Disdn) connections on Nortel Magellan Passport systems.

Start monitoring Nortel Magellan Passport WAN switch (Japan INS-Net ISDN signaling) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Nortel-Magellan-Passport-DisdnJapanInsMIB

What Is Nortel-Magellan-Passport-DisdnJapanInsMIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description