Nortel-Magellan-Passport-BgpMIB :: vrIpBgpAggregateNetRipInterface

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-BgpMIB › vrIpBgpAggregateNetRipInterface

vrIpBgpAggregateNetRipInterface

Module: Nortel-Magellan-Passport-BgpMIB

OID (symbolic): Nortel-Magellan-Passport-BgpMIB::vrIpBgpAggregateNetRipInterface

OID (numeric): 1.3.6.1.4.1.562.2.4.1.100.6.21.6.2.10.1.7

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: This attribute specifies a local RIP interface which should be equal to one of the IP addresses provisioned as a logicalIf component under IpPort.

When this value is non-zero, the value of the protocol attribute must be either set to rip or to all. And this more specific route will be advertised together with the aggregated route only if it is learned through RIP and this RIP interface. The default value 0.0.0.0 indicates that the RIP interface is not specified.

What is vrIpBgpAggregateNetRipInterface?

The local RIP interface (by IP address) this more-specific route must have been learned through for it to be included with the aggregate; must match a provisioned logicalIf address. Non-zero requires vrIpBgpAggregateNetProtocol to be rip or all; 0.0.0.0 (the default) means unspecified.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.100.6.21.6.2.10.1.7
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-BgpMIB::vrIpBgpAggregateNetRipInterface

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.100.6.21.6.2.10.1.7.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-BgpMIB::vrIpBgpAggregateNetRipInterface.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.100.6.21.6.2.10.1.7.1 a <value>

Start monitoring Nortel Magellan Passport WAN switch (per-VR BGP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-BgpMIB::vrIpBgpAggregateNetRipInterface OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport WAN switch (per-VR BGP) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.100vrNortel-Magellan-Passport-VirtualRouterMIB
1.3.6.1.4.1.562.2.4.1.100.6vrIpNortel-Magellan-Passport-IpMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.100.6.21vrIpBgpNortel-Magellan-Passport-BgpMIB
1.3.6.1.4.1.562.2.4.1.100.6.21.6vrIpBgpAggregateNortel-Magellan-Passport-BgpMIB
1.3.6.1.4.1.562.2.4.1.100.6.21.6.2vrIpBgpAggregateNetNortel-Magellan-Passport-BgpMIB
1.3.6.1.4.1.562.2.4.1.100.6.21.6.2.10vrIpBgpAggregateNetProvTableNortel-Magellan-Passport-BgpMIB
1.3.6.1.4.1.562.2.4.1.100.6.21.6.2.10.1vrIpBgpAggregateNetProvEntryNortel-Magellan-Passport-BgpMIB
1.3.6.1.4.1.562.2.4.1.100.6.21.6.2.10.1.7vrIpBgpAggregateNetRipInterfaceNortel-Magellan-Passport-BgpMIB