Nortel-Magellan-Passport-BaseSnmpMIB :: vrSnmpIpStack

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-BaseSnmpMIB › vrSnmpIpStack

vrSnmpIpStack

Module: Nortel-Magellan-Passport-BaseSnmpMIB

OID (symbolic): Nortel-Magellan-Passport-BaseSnmpMIB::vrSnmpIpStack

OID (numeric): 1.3.6.1.4.1.562.2.4.1.100.8.20.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute controls which IP stack the Snmp component will use to send and receive Snmp traffic for Communites and Parties whose tdomain attribute specifies snmpUdpDomain as the transport protocol. If the value of this attribute is vrIp then Snmp Udp traffic will be sent and received using Ip as provisioned under the VirtualRouter. This requires provisioning of the ip feature. If the value of this attribute is ipiFrIpiVc then Snmp Udp traffic will be sent and received using IpiFr (Ip over Frame Relay) or IpiVc (Ip over Vc), whichever is provisioned. This requires provisioning of one of the ipiVc or ipiFr features.

What is vrSnmpIpStack?

Selects which IP stack the SNMP agent uses for UDP-based SNMP traffic: the virtual router's own IP stack (vrIp) or IP over Frame Relay/ATM (ipiFrIpiVc), depending on which underlying transport feature is provisioned.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.100.8.20.1.4
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-BaseSnmpMIB::vrSnmpIpStack

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.100.8.20.1.4.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-BaseSnmpMIB::vrSnmpIpStack.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.100.8.20.1.4.1 i <value>

Start monitoring Nortel Magellan Passport ATM/Frame Relay WAN switch (SNMP agent self-management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-BaseSnmpMIB::vrSnmpIpStack OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM/Frame Relay WAN switch (SNMP agent self-management) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.100vrNortel-Magellan-Passport-VirtualRouterMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.100.8vrSnmpNortel-Magellan-Passport-BaseSnmpMIB
1.3.6.1.4.1.562.2.4.1.100.8.20vrSnmpProvTableNortel-Magellan-Passport-BaseSnmpMIB
1.3.6.1.4.1.562.2.4.1.100.8.20.1vrSnmpProvEntryNortel-Magellan-Passport-BaseSnmpMIB
1.3.6.1.4.1.562.2.4.1.100.8.20.1.4vrSnmpIpStackNortel-Magellan-Passport-BaseSnmpMIB