All MIBs › Nortel-Magellan-Passport-AtmBaseMIB › lpEngFcrcPqcOvIpRoutesPoolCapacity
lpEngFcrcPqcOvIpRoutesPoolCapacity
Module: Nortel-Magellan-Passport-AtmBaseMIB
OID (symbolic): Nortel-Magellan-Passport-AtmBaseMIB::lpEngFcrcPqcOvIpRoutesPoolCapacity
OID (numeric): 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.10.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute indicates the number of desired IP routing entries for the Logical Processor. It is used to determine the number of IP routing resources to be allocated on the card.
Each IP routing resource can hold between one and three IP routing entries. To calculate the number of IP routing resources required, an average of 2 IP routing entries per IP routing resource is used.
If there are not enough resources on the card, a smaller pool is allocated. Operational attribute (in Fcrc Pqc) ipRoutesPoolSize indicates the actual size of the pool.
What is lpEngFcrcPqcOvIpRoutesPoolCapacity?
Sets the desired number of IP routing entries (0-100000, default 4096) for this Logical Processor, used to size how many IP routing hardware resources to allocate (roughly one resource per 2 entries on average); if the card lacks the resources to honor this request, the actual allocated size is reported in lpEngFcrcPqcIpRoutesPoolSize.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.10.1.1 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmBaseMIB::lpEngFcrcPqcOvIpRoutesPoolCapacity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.10.1.1.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmBaseMIB::lpEngFcrcPqcOvIpRoutesPoolCapacity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.10.1.1.1 i <value>
Start monitoring Nortel Magellan Passport ATM WAN switch (base ATM interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmBaseMIB::lpEngFcrcPqcOvIpRoutesPoolCapacity OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM WAN switch (base ATM interface) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.12 | lp | Nortel-Magellan-Passport-LogicalProcessorMIB |
| 1.3.6.1.4.1.562.2.4.1.12.23 | lpEng | Nortel-Magellan-Passport-LogicalProcessorMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.23.6 | lpEngFcrc | Nortel-Magellan-Passport-AtmBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3 | lpEngFcrcPqc | Nortel-Magellan-Passport-AtmBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2 | lpEngFcrcPqcOv | Nortel-Magellan-Passport-AtmBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.10 | lpEngFcrcPqcOvProvTable | Nortel-Magellan-Passport-AtmBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.10.1 | lpEngFcrcPqcOvProvEntry | Nortel-Magellan-Passport-AtmBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.12.23.6.3.2.10.1.1 | lpEngFcrcPqcOvIpRoutesPoolCapacity | Nortel-Magellan-Passport-AtmBaseMIB |