Nortel-Magellan-Passport-AtmBaseMIB :: lpEngArcOvMulticastBranchesCapacity

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-AtmBaseMIB › lpEngArcOvMulticastBranchesCapacity

lpEngArcOvMulticastBranchesCapacity

Module: Nortel-Magellan-Passport-AtmBaseMIB

OID (symbolic): Nortel-Magellan-Passport-AtmBaseMIB::lpEngArcOvMulticastBranchesCapacity

OID (numeric): 1.3.6.1.4.1.562.2.4.1.12.23.5.2.10.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the number of multicast branches that can be enabled on this FP.

A multicast branch is used for cell replication on a VCC connection whose Vcc distributionType is pointToMultipoint. A branch represents one ATM destination for the replicated cells.

Increasing the value of this attribute reduces the memory available for the cell and frame storage.

For CQC based ATM FPs, the maximum value for this attribute is 10752.

What is lpEngArcOvMulticastBranchesCapacity?

Sets how many multicast cell-replication branches this FP may enable for point-to-multipoint VCCs (default 0, up to 16384, or 10752 on CQC-based FPs); raising it reduces memory available for cell and frame storage.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.23.5.2.10.1.2
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmBaseMIB::lpEngArcOvMulticastBranchesCapacity

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.23.5.2.10.1.2.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmBaseMIB::lpEngArcOvMulticastBranchesCapacity.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.12.23.5.2.10.1.2.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> lpEngArcOvMulticastBranchesCapacity.1

Start monitoring Nortel Magellan Passport ATM WAN switch (base ATM interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmBaseMIB::lpEngArcOvMulticastBranchesCapacity OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM WAN switch (base ATM interface) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.12lpNortel-Magellan-Passport-LogicalProcessorMIB
1.3.6.1.4.1.562.2.4.1.12.23lpEngNortel-Magellan-Passport-LogicalProcessorMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.12.23.5lpEngArcNortel-Magellan-Passport-AtmBaseMIB
1.3.6.1.4.1.562.2.4.1.12.23.5.2lpEngArcOvNortel-Magellan-Passport-AtmBaseMIB
1.3.6.1.4.1.562.2.4.1.12.23.5.2.10lpEngArcOvProvTableNortel-Magellan-Passport-AtmBaseMIB
1.3.6.1.4.1.562.2.4.1.12.23.5.2.10.1lpEngArcOvProvEntryNortel-Magellan-Passport-AtmBaseMIB
1.3.6.1.4.1.562.2.4.1.12.23.5.2.10.1.2lpEngArcOvMulticastBranchesCapacityNortel-Magellan-Passport-AtmBaseMIB