Nortel-Magellan-Passport-AtmBaseMIB :: lpEngArcAqmOvConnectionPoolCapacity

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-AtmBaseMIB › lpEngArcAqmOvConnectionPoolCapacity

lpEngArcAqmOvConnectionPoolCapacity

Module: Nortel-Magellan-Passport-AtmBaseMIB

OID (symbolic): Nortel-Magellan-Passport-AtmBaseMIB::lpEngArcAqmOvConnectionPoolCapacity

OID (numeric): 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This attribute specifies the maximum number of connections (VCC, VPC, and VPT) that can be configured on the AQM instance of the LogicalProcessor.

The value of this attribute should be less than or equal to totalConnectionPoolCapacity of the Arc component. Note that 3 connections are used for each standard Vpt and 2 for each basic Vpt.

The default value derivedFromArc is obtained using the following equation:

totalConnectionPoolCapacity / number of AQM component on FP.

VALUES (

0 = derivedFromArc

)

What is lpEngArcAqmOvConnectionPoolCapacity?

Sets the maximum number of connections (VCC, VPC, VPT) this AQM instance may configure (0, or 1-16000); a value of 0 (derivedFromArc, the default) auto-derives the cap by dividing the parent Arc's totalConnectionPoolCapacity across the AQM components on the FP.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmBaseMIB::lpEngArcAqmOvConnectionPoolCapacity

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmBaseMIB::lpEngArcAqmOvConnectionPoolCapacity.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10.1.1.1 i <value>

Start monitoring Nortel Magellan Passport ATM WAN switch (base ATM interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmBaseMIB::lpEngArcAqmOvConnectionPoolCapacity OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM WAN switch (base ATM interface) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.12lpNortel-Magellan-Passport-LogicalProcessorMIB
1.3.6.1.4.1.562.2.4.1.12.23lpEngNortel-Magellan-Passport-LogicalProcessorMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.12.23.5lpEngArcNortel-Magellan-Passport-AtmBaseMIB
1.3.6.1.4.1.562.2.4.1.12.23.5.4lpEngArcAqmNortel-Magellan-Passport-AtmBaseMIB
1.3.6.1.4.1.562.2.4.1.12.23.5.4.2lpEngArcAqmOvNortel-Magellan-Passport-AtmBaseMIB
1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10lpEngArcAqmOvProvTableNortel-Magellan-Passport-AtmBaseMIB
1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10.1lpEngArcAqmOvProvEntryNortel-Magellan-Passport-AtmBaseMIB
1.3.6.1.4.1.562.2.4.1.12.23.5.4.2.10.1.1lpEngArcAqmOvConnectionPoolCapacityNortel-Magellan-Passport-AtmBaseMIB