Nortel-Magellan-Passport-AtmBaseMIB :: lpAruTotalConnectionPoolUsage

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-AtmBaseMIB › lpAruTotalConnectionPoolUsage

lpAruTotalConnectionPoolUsage

Module: Nortel-Magellan-Passport-AtmBaseMIB

OID (symbolic): Nortel-Magellan-Passport-AtmBaseMIB::lpAruTotalConnectionPoolUsage

OID (numeric): 1.3.6.1.4.1.562.2.4.1.12.20.100.1.5

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-only

Description: If the LogicalProcessor is associated with a card of a cardType other than 4pE1Aal1 or 4pDS1Aal1, this attribute indicates the total number of enabled VCCs and VPCs in AtmIfs associated with this LogicalProcessor. An example of a VCC not in the enabled state is a VCC with a Test subcomponent. This attribute is equal to the sum of the AtmIf Ca connectionPoolUsage attributes of AtmIfs associated with this LogicalProcessor.

If the LogicalProcessor is associated with a card of cardType 4pE1Aal1 or 4pDS1Aal1, this attribute indicates the total number of Ces components associated with this LogicalProcessor.

What is lpAruTotalConnectionPoolUsage?

Reports the current number of enabled VCC/VPC connections in use on this LogicalProcessor (or, on 4pE1Aal1/4pDS1Aal1 cards, the number of Ces components), up to 10752; an admin compares this against lpArcTotalConnectionPoolCapacity to see how close the FP is to running out of connection resources.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.20.100.1.5
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmBaseMIB::lpAruTotalConnectionPoolUsage

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.20.100.1.5.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmBaseMIB::lpAruTotalConnectionPoolUsage.1

Start monitoring Nortel Magellan Passport ATM WAN switch (base ATM interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmBaseMIB::lpAruTotalConnectionPoolUsage OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM WAN switch (base ATM interface) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.12lpNortel-Magellan-Passport-LogicalProcessorMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.12.20lpAruNortel-Magellan-Passport-AtmBaseMIB
1.3.6.1.4.1.562.2.4.1.12.20.100lpAruOperTableNortel-Magellan-Passport-AtmBaseMIB
1.3.6.1.4.1.562.2.4.1.12.20.100.1lpAruOperEntryNortel-Magellan-Passport-AtmBaseMIB
1.3.6.1.4.1.562.2.4.1.12.20.100.1.5lpAruTotalConnectionPoolUsageNortel-Magellan-Passport-AtmBaseMIB