All MIBs › Nortel-Magellan-Passport-AtmBaseMIB › lpArcPerVcQueueInterfaces
lpArcPerVcQueueInterfaces
Module: Nortel-Magellan-Passport-AtmBaseMIB
OID (symbolic): Nortel-Magellan-Passport-AtmBaseMIB::lpArcPerVcQueueInterfaces
OID (numeric): 1.3.6.1.4.1.562.2.4.1.12.19.100.1.25
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute of the same name.
This attribute specifies the number of independent ports or IMA components which support shaping and per-VC queueing on the LogicalProcessor.
When this attribute is not zero, at most 4 independent ports or 4 Ima virtual links are supported, regardless of whether or not traffic shaping is enabled on the associated AtmIf components. In this case only independent port instances 0-3 or Ima instances 0-3 can be supported on an associated AtmIf component.
For 2 ports cards, the valid values for this attribute are 0, 1, or 2. For 3 ports cards, the valid values for this attribute are 0, 1, or 3. For 8 ports cards, the valid values for this attribute are 0, 1, 2, or 4.
What is lpArcPerVcQueueInterfaces?
Sets how many independent ports or IMA links (0-4) on this FP support per-VC queueing and traffic shaping. The valid values depend on the card's port count -- e.g. only 0, 1 or 2 on a two-port card -- and setting it non-zero restricts shaped traffic to port/IMA instances 0 through 3.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.19.100.1.25 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmBaseMIB::lpArcPerVcQueueInterfaces
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.19.100.1.25.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmBaseMIB::lpArcPerVcQueueInterfaces.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.12.19.100.1.25.1 i <value>
Start monitoring Nortel Magellan Passport ATM WAN switch (base ATM interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmBaseMIB::lpArcPerVcQueueInterfaces OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM WAN switch (base ATM interface) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.12 | lp | Nortel-Magellan-Passport-LogicalProcessorMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.19 | lpArc | Nortel-Magellan-Passport-AtmBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.12.19.100 | lpArcProvTable | Nortel-Magellan-Passport-AtmBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1 | lpArcProvEntry | Nortel-Magellan-Passport-AtmBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1.25 | lpArcPerVcQueueInterfaces | Nortel-Magellan-Passport-AtmBaseMIB |