All MIBs › Nortel-Magellan-Passport-AtmBaseMIB › lpArcMulticastBranchesCapacity
lpArcMulticastBranchesCapacity
Module: Nortel-Magellan-Passport-AtmBaseMIB
OID (symbolic): Nortel-Magellan-Passport-AtmBaseMIB::lpArcMulticastBranchesCapacity
OID (numeric): 1.3.6.1.4.1.562.2.4.1.12.19.100.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute is migrated to the Lp/n Eng Arc Ov attribute of the same name.
This attribute specifies the number of multicast branches that can be enabled on the Logical Processor.
A multicast branch is used for cell replication on a Vcc connection whose Vcc distributionType is pointToMultipoint. A branch represent one ATM destination for the replicated cells
Increasing the value of this attribute reduces the CQM memory available for the cell and frame free lists.
What is lpArcMulticastBranchesCapacity?
Sets how many multicast cell-replication branches (destination endpoints for a point-to-multipoint VCC) the LogicalProcessor may enable, up to 10752. Raising this value reduces the CQM memory left over for the cell and frame free lists, so an admin should only increase it if the FP actually carries multicast VCCs.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.19.100.1.6 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmBaseMIB::lpArcMulticastBranchesCapacity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.19.100.1.6.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmBaseMIB::lpArcMulticastBranchesCapacity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.12.19.100.1.6.1 i <value>
Start monitoring Nortel Magellan Passport ATM WAN switch (base ATM interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmBaseMIB::lpArcMulticastBranchesCapacity OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM WAN switch (base ATM interface) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.12 | lp | Nortel-Magellan-Passport-LogicalProcessorMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.19 | lpArc | Nortel-Magellan-Passport-AtmBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.12.19.100 | lpArcProvTable | Nortel-Magellan-Passport-AtmBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1 | lpArcProvEntry | Nortel-Magellan-Passport-AtmBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1.6 | lpArcMulticastBranchesCapacity | Nortel-Magellan-Passport-AtmBaseMIB |