All MIBs › Nortel-Magellan-Passport-AtmBaseMIB › lpArcLnnConnectionPoolCapacity
lpArcLnnConnectionPoolCapacity
Module: Nortel-Magellan-Passport-AtmBaseMIB
OID (symbolic): Nortel-Magellan-Passport-AtmBaseMIB::lpArcLnnConnectionPoolCapacity
OID (numeric): 1.3.6.1.4.1.562.2.4.1.12.19.100.1.44
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute is migrated to the Lp/n Eng Fcrc Ov attribute of the same name.
This attribute specifies the maximum number of resource records for the connections which utilize Logical Network Number (LNN) on the LogicalProcessor.
A logical network is a subset of passport modules together with a subset of trunks that interconnect those modules. It carries the traffic for a defined set of network protocols. A LNN is used to identify a logical network. The connectionless services which utilize the logical networks require some processing at the intermediate nodes. This pool is allocated at the intermediate nodes to sustain these connectionless services.
Due to limited resources, not all of the provisioned number of LNN connection resource records may be allocated. The actual number of resource records allocated is indicated by the sum of Aru lnnConnectionPoolAvailable and Aru lnnConnectionPoolUsage attributes.
If the McsMgr DprsMcsEpG/x Ep/y EpD transportConnectionPreference attribute is set to atmOnly, each instance of the McsMgr DprsMcsEpG/x Ep/y component uses one resource record from this pool.
What is lpArcLnnConnectionPoolCapacity?
Sets how many Logical Network Number (LNN) resource records the LogicalProcessor can hold (1-512, default 128) for connectionless traffic passing through this node between Passport modules; each DprsMcsEpG endpoint configured for atmOnly transport consumes one record from this pool.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.19.100.1.44 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmBaseMIB::lpArcLnnConnectionPoolCapacity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.19.100.1.44.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmBaseMIB::lpArcLnnConnectionPoolCapacity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.12.19.100.1.44.1 i <value>
Start monitoring Nortel Magellan Passport ATM WAN switch (base ATM interface) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmBaseMIB::lpArcLnnConnectionPoolCapacity OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM WAN switch (base ATM interface) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.12 | lp | Nortel-Magellan-Passport-LogicalProcessorMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.19 | lpArc | Nortel-Magellan-Passport-AtmBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.12.19.100 | lpArcProvTable | Nortel-Magellan-Passport-AtmBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1 | lpArcProvEntry | Nortel-Magellan-Passport-AtmBaseMIB |
| 1.3.6.1.4.1.562.2.4.1.12.19.100.1.44 | lpArcLnnConnectionPoolCapacity | Nortel-Magellan-Passport-AtmBaseMIB |