NOTES-MIB

All MIBs › NOTES-MIB

Category: Applications

Description: Provides SNMP objects for managing Lotus Notes or Domino server availability and session statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NOTES-MIB?

NOTES-MIB is an enterprise MIB (branch lotus/notes/notesPump) for monitoring IBM/Lotus Notes and Domino mail server infrastructure. It exposes objects covering mail routing and delivery statistics, statistics collection metadata, and general server statistics indexing, giving visibility into the software-service health of a Domino mail transfer agent rather than physical hardware. Key monitoring uses include tracking dead mail, delivered mail counts, total mail failures, and transferred/routed mail volumes to gauge whether the mail server's queueing and transfer processes are functioning correctly, alongside a proxy agent version object useful for software version tracking. It also exposes statistics start/current time objects that let a poller gauge how long a counting interval has been running. This is a vendor-specific MIB tied to Lotus/Domino messaging software rather than a hardware device, deployed wherever a Domino mail/routing server needs to be monitored by an enterprise NMS. Engineers can download the NOTES-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NOTES-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Lotus Notes/Domino mail server

Monitoring Examples

An administrator would poll lnDeadMail and lnTotalMailFailures to detect a mail routing problem, since a rising dead-mail count usually indicates misaddressed messages or a downstream routing failure. Comparing lnDeliveredMail against lnTotalRoutedMail and lnTransferredMail over the interval bounded by lnStatsStartTime and lnStatsCurrentTime reveals whether the server is keeping pace with inbound mail volume or falling behind. Walking lnAllStatsTable/lnAllStatsEntry with lnStatisticIndex and lnStatisticString exposes the full set of named Domino statistics counters for deeper diagnostics. lnMainProxyAgentVersion lets an admin confirm the agent software version deployed on the server.

What Can Be Monitored

dead mail count
delivered mail count
total mail failures
total routed mail
transferred mail count
mail proxy agent version

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
lotus	1.3.6.1.4.1.334
notes	1.3.6.1.4.1.334.72
NTF lnUnknownEventTrap	1.3.6.1.4.1.334.72.0.0			This trap indicates that a Notes Event of Unknown severity has occurred. Configuration of which events generated traps is performed in the Public Address book.
NTF lnFatalEventTrap	1.3.6.1.4.1.334.72.0.1			This trap indicates that a Notes Event of Fatal severity has occurred. Configuration of which events generated traps is performed in the Public Address book.
NTF lnFailureEventTrap	1.3.6.1.4.1.334.72.0.2			This trap indicates that a Notes Event of Failure severity has occurred. Configuration of which events generated traps is performed in the Public Address book.
NTF lnWarning1EventTrap	1.3.6.1.4.1.334.72.0.3			This trap indicates that a Notes Event of Warning1 severity has occurred. Configuration of which events generated traps is performed in the Public Address book.
NTF lnWarning2EventTrap	1.3.6.1.4.1.334.72.0.4			This trap indicates that a Notes Event of Warning2 severity has occurred. Configuration of which events generated traps is performed in the Public Address book.
NTF lnNormalEventTrap	1.3.6.1.4.1.334.72.0.5			This trap indicates that a Notes Event of Normal severity has occurred. Configuration of which events generated traps is performed in the Public Address book.
NTF lnServerUpTrap	1.3.6.1.4.1.334.72.0.11			This trap indicates that the Notes server has come up.
NTF lnServerDownTrap	1.3.6.1.4.1.334.72.0.12			This trap indicates that the Notes server has gone down.
NTF lnServerPulseFailedTrap	1.3.6.1.4.1.334.72.0.13			This trap indicates that the Notes server is not responding to the Lotus notes SNMP agent. The server may have crashed, or may be busy.
NTF lnServerPulseRestoredTrap	1.3.6.1.4.1.334.72.0.14			This trap indicates that the Notes server is now responding to the Lotus notes SNMP agent.
NTF lnSystemRebootingTrap	1.3.6.1.4.1.334.72.0.15			This trap indicates that the operating system the Notes server is running has recieved an SNMP reboot request. The system is now rebooting, this may take up to 5 minutes.
NTF lnServerNotRespondingTrap	1.3.6.1.4.1.334.72.0.16			This trap indicates that the Notes server has not responded to the Lotus Notes SNMP agent for several minutes. There is a chance that the Notes server may have crashed.
NTF lnServerNowRespondingTrap	1.3.6.1.4.1.334.72.0.17			This trap indicates that the Notes server is now responding to the Lotus Notes SNMP agent after failing to respond for several minutes. The server may be overloaded.
NTF lnAlarmStatisticThreshold	1.3.6.1.4.1.334.72.0.30			This trap is sent by NotesView for AIX when an alarm statistic threshold is hit
NTF lnAlarmServerStatusChange	1.3.6.1.4.1.334.72.0.31			This trap is sent by NotesView for AIX when the alarm status of the server changes.
NTF lnAlarmPortStatusChange	1.3.6.1.4.1.334.72.0.32			This trap is sent by NotesView for AIX when the alarm status of a port changes.
NTF lnAlarmTaskStatusChange	1.3.6.1.4.1.334.72.0.33			This trap is sent by NotesView for AIX when the alarm status of a permanent task changes.
NTF lnAlarmNVStatClear	1.3.6.1.4.1.334.72.0.34			This trap is sent by NotesView for AIX to indicate that an alarm statistic threshold condition has been cleared.
NTF lnAlarmAutoDiscovery	1.3.6.1.4.1.334.72.0.35			This trap is sent by NotesView for AIX to indicate a discrepancy between the information that Autodiscovery has detected, and what the server has reported.
NTF lnAlarmServerNotesEvent	1.3.6.1.4.1.334.72.0.36			This trap is sent by NotesView for AIX when a Notes server event occurs.
NTF lnAlarmServerCfgChangeEvent	1.3.6.1.4.1.334.72.0.37			This trap is sent by NotesView for AIX if the server configuration has changed.
NTF lnAlarmMailProbeEvent	1.3.6.1.4.1.334.72.0.38			This trap is sent by NotesView for AIX if the Mail Probe task needs to generate an alarm.
NTF lnAlarmServerSNMPEvent	1.3.6.1.4.1.334.72.0.39			This trap is sent by NotesView for AIX if the there is an SNMP event that generates an alarm.
NTF lnAlarmNSFRemoteConsoleEvent	1.3.6.1.4.1.334.72.0.40			This trap is sent by NotesView for AIX if the there is an NSF remote console event
NTF lnAlarmMailBoxEvent	1.3.6.1.4.1.334.72.0.41			This trap is sent by NotesView for AIX if the there is a MailBox event.
NTF lnAlarmClearAll	1.3.6.1.4.1.334.72.0.50			This trap is sent by NotesView for AIX to cause the alarm manager daemon (nvalarmgrd) to clear all alarms for all servers and connections. The status of all objects on the map will be reset to UNKNOWN.
NTF lnAlarmClearServers	1.3.6.1.4.1.334.72.0.51			This trap is sent by NotesView for AIX to cause the alarm manager daemon (nvalarmgrd) to clear all alarms for a given server or group of servers. The status of all the connections for each serverId specified in the PDU will also be cleared. The resulting status of all related objects on the map will be reset to UNKNOWN.
NTF lnSignalAutodiscoveryStart	1.3.6.1.4.1.334.72.0.52			This trap is sent by the NotesView for AIX console when the Autodiscovery process starts. The NotesView Alarm Manager daemon (nvalarmgrd) will suspends all Alarm processing until the Autodiscovery process is complete.
NTF lnSignalAutodiscoveryFinished	1.3.6.1.4.1.334.72.0.53			This trap will be used by NotesView for AIX to signal the Alarm Manager daemon (nvalarmgrd) that the Autodiscovery process has completed or stopped. Alarm processing will continue at this point, and all alarms that were received during Autodiscovery will be processed.
NTF lnSignalServerConfigChg	1.3.6.1.4.1.334.72.0.54			This trap will be used by NotesView for AIX to signal the Alarm Manager daemon (nvalarmgrd) that there has been a Notes server configuration change.
NTF lnTrapRequestMostSevereStatus	1.3.6.1.4.1.334.72.0.55			This trap will be sent by the NotesView management station when it needs to be updated with the most severe status of a given object
NTF lnTrapDisplayAlarmClearServers	1.3.6.1.4.1.334.72.0.60			This trap will be generated by the NotesView Alarm Manager in order to display which server had its alarms cleared as a result of receiving lnAlarmClearServers (trap type 51). One of these traps will be generated for each server bound in the PDU for the lnAlarmClearServers trap. For display only. The Alarm Manager does not do any processing for this trap.
NTF lnTrapDisplayClearedAlarm	1.3.6.1.4.1.334.72.0.70			This trap will be sent by the NotesView management station when it receives a clearing alarm from the poller (or console) to display the alarm information on the NetView event cards. The alarms are configured not to be displayed in the event cards, since the PDU of an Alarm trap doesn't contain any information useful to the user. Once the alarm is received, the PDU is deciphered and this informational trap is generated by the NotesView Alarm Manager.
NTF lnTrapDisplayIndeterminateAlarm	1.3.6.1.4.1.334.72.0.71			This trap will be sent by the NotesView management station when it receives an indeterminate alarm from the poller (or console) to display the alarm information on the NetView event cards. The alarms are configured not to be displayed in the event cards, since the PDU of an Alarm trap doesn't contain any information useful to the user. Once the alarm is received, the PDU is deciphered and this informational trap is generated by the NotesView Alarm Manager.
NTF lnTrapDisplayWarningAlarm	1.3.6.1.4.1.334.72.0.72			This trap will be sent by the NotesView management station when it receives a warning alarm from the poller (or console) to display the alarm information on the NetView event cards. The alarms are configured not to be displayed on the event cards, since the PDU of an Alarm trap doesn't contain any information useful to the user. Once the alarm is received, the PDU is deciphered and this informational trap is generated by the NotesView Alarm Manager.
NTF lnTrapDisplayMinorAlarm	1.3.6.1.4.1.334.72.0.73			This trap will be sent by the NotesView management station when it receives a minor alarm from the poller (or console) to display the alarm information on the NetView event cards. The alarms are configured not to be displayed in the event cards, since the PDU of an Alarm trap doesn't contain any information useful to the user. Once the alarm is received, the PDU is deciphered and this informational trap is generated by the NotesView Alarm Manager.
NTF lnTrapDisplayCriticalAlarm	1.3.6.1.4.1.334.72.0.74			This trap will be sent by the NotesView management station when it receives a critical alarm from the poller (or console) to display the alarm information on the NetView event cards. The alarms are configured not to be displayed in the event cards, since the PDU of an Alarm trap doesn't contain any information useful to the user. Once the alarm is received, the PDU is deciphered and this informational trap is generated by the NotesView Alarm Manager.
NTF lnTrapDisplayMajorAlarm	1.3.6.1.4.1.334.72.0.75			This trap will be sent by the NotesView management station when it receives a major alarm from the poller (or console) to display the alarm information on the NetView event cards. The alarms are configured not to be displayed in the event cards, since the PDU of an Alarm trap doesn't contain any information useful to the user. Once the alarm is received, the PDU is deciphered and this informational trap is generated by the NotesView Alarm Manager.
lnInfo	1.3.6.1.4.1.334.72.1
lnStats	1.3.6.1.4.1.334.72.1.1
lnAllStatsTable	1.3.6.1.4.1.334.72.1.1.1		not-accessible	A table containing a one statistic per entry view of the entire Notes server statistics structure.
lnAllStatsEntry	1.3.6.1.4.1.334.72.1.1.1.1		not-accessible	The entry type definition for the lnAllStatsTable.
INT lnStatisticIndex	1.3.6.1.4.1.334.72.1.1.1.1.1	INTEGER	read-only	A unique value for each statistic in the Notes server statistics structure.
STR lnStatisticString	1.3.6.1.4.1.334.72.1.1.1.1.2	DisplayString	read-only	A string describing one statistic from the Notes Server statistics structure.
INT lnStatsStartTime	1.3.6.1.4.1.334.72.1.1.2	INTEGER	read-only	Time and date at which the statistics agent was last started. Represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch).
INT lnStatsCurrentTime	1.3.6.1.4.1.334.72.1.1.3	INTEGER	read-only	Time and date of the last statistics update. Represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch).
lnMail	1.3.6.1.4.1.334.72.1.1.4
INT lnDeadMail	1.3.6.1.4.1.334.72.1.1.4.1	INTEGER	read-only	Number of dead (undeliverable) mail messages.
INT lnDeliveredMail	1.3.6.1.4.1.334.72.1.1.4.2	INTEGER	read-only	Number of messges received by router.
INT lnTotalMailFailures	1.3.6.1.4.1.334.72.1.1.4.3	INTEGER	read-only	Total number of routing failures since the server started.
INT lnTotalRoutedMail	1.3.6.1.4.1.334.72.1.1.4.4	INTEGER	read-only	Total number of mail messages routed since the server started.
INT lnTransferredMail	1.3.6.1.4.1.334.72.1.1.4.5	INTEGER	read-only	Number of messages router attempted to transfer.
INT lnWaitingMail	1.3.6.1.4.1.334.72.1.1.4.6	INTEGER	read-only	Number of mail messages waiting to be routed.
INT lnNumWaitingRecipients	1.3.6.1.4.1.334.72.1.1.4.7	INTEGER	read-only	Number of pending mail messages awaiting local delivery.
STR lnMailDomain	1.3.6.1.4.1.334.72.1.1.4.8	DisplayString	read-only	Notes server's mail domain.
INT lnAverageMailDeliverTime	1.3.6.1.4.1.334.72.1.1.4.9	INTEGER	read-only	Average time for mail delivery in seconds.
INT lnAverageMailServerHops	1.3.6.1.4.1.334.72.1.1.4.10	INTEGER	read-only	Average number of server hops for mail delivery.
INT lnAverageMailSizeDelivered	1.3.6.1.4.1.334.72.1.1.4.11	INTEGER	read-only	Average size of mail messages delivered in bytes.
INT lnMaximumMailDeliverTime	1.3.6.1.4.1.334.72.1.1.4.12	INTEGER	read-only	Maximum time for mail delivery in seconds.
INT lnMaximumMailServerHops	1.3.6.1.4.1.334.72.1.1.4.13	INTEGER	read-only	Maximum number of server hops for mail delivery.
INT lnMaximumMailSizeDelivered	1.3.6.1.4.1.334.72.1.1.4.14	INTEGER	read-only	Maximum size of mail delivered in bytes.
INT lnMinimumMailDeliverTime	1.3.6.1.4.1.334.72.1.1.4.15	INTEGER	read-only	Minimum time for mail delivery in seconds.
INT lnMinimumMailServerHops	1.3.6.1.4.1.334.72.1.1.4.16	INTEGER	read-only	Minimum number of server hops for mail delivery.
INT lnMinimumMailSizeDelivered	1.3.6.1.4.1.334.72.1.1.4.17	INTEGER	read-only	Minimum size of mail delivered in bytes.
INT lnTotalKBTransferred	1.3.6.1.4.1.334.72.1.1.4.18	INTEGER	read-only	Total mail transferred in kilobytes.
INT lnMailTransferFailures	1.3.6.1.4.1.334.72.1.1.4.19	INTEGER	read-only	Number of mail messages the router was unable to transfer.
lnReplica	1.3.6.1.4.1.334.72.1.1.5
INT lnRepDocsAdded	1.3.6.1.4.1.334.72.1.1.5.1	INTEGER	read-only	Number of docs added via replication since server was started.
INT lnRepDocsDeleted	1.3.6.1.4.1.334.72.1.1.5.2	INTEGER	read-only	Number of docs deleted via replication since server was started.
INT lnRepDocsUpdated	1.3.6.1.4.1.334.72.1.1.5.3	INTEGER	read-only	Number of docs updated via replication since server was started.
INT lnRepFailed	1.3.6.1.4.1.334.72.1.1.5.4	INTEGER	read-only	Number of replications that generated an error.
INT lnRepSuccessful	1.3.6.1.4.1.334.72.1.1.5.5	INTEGER	read-only	Number of successful replications.
lnReplicaCluster	1.3.6.1.4.1.334.72.1.1.5.6
INT lnRepClusterDocsAdded	1.3.6.1.4.1.334.72.1.1.5.6.1	INTEGER	read-only	The number of documents added by the cluster replicator
INT lnRepClusterDocsDeleted	1.3.6.1.4.1.334.72.1.1.5.6.2	INTEGER	read-only	The number of documents deleted by the cluster replicator
INT lnRepClusterDocsUpdated	1.3.6.1.4.1.334.72.1.1.5.6.3	INTEGER	read-only	The number of documents updated by the cluster replicator
INT lnRepClusterFailed	1.3.6.1.4.1.334.72.1.1.5.6.4	INTEGER	read-only	The number of failed replications since server startup.
INT lnRepClusterFilesLocal	1.3.6.1.4.1.334.72.1.1.5.6.5	INTEGER	read-only	The number of databases on the current server for which there are replicas on other servers in the cluster.
INT lnRepClusterFilesRemote	1.3.6.1.4.1.334.72.1.1.5.6.6	INTEGER	read-only	The number of databases on other servers to which the cluster replicator pushes changes.
INT lnRepClusterRetrySkipped	1.3.6.1.4.1.334.72.1.1.5.6.7	INTEGER	read-only	The number of times the cluster replicator did not attempt to replicate a database. The retry is skipped when the destination server is known to be unreachable, or the database is waiting for another retry attempt.
INT lnRepClusterRetryWaiting	1.3.6.1.4.1.334.72.1.1.5.6.8	INTEGER	read-only	The number of replicas that are waiting for retry attempts.
INT lnRepClusterSecondsOnQueue	1.3.6.1.4.1.334.72.1.1.5.6.9	INTEGER	read-only	The amount of time in seconds that the last database replicated spent on the work queue.
INT lnRepClusterSecondsOnQueueAvg	1.3.6.1.4.1.334.72.1.1.5.6.10	INTEGER	read-only	The average amount of time in seconds that a database spent on the work queue.
INT lnRepClusterSecondsOnQueueMax	1.3.6.1.4.1.334.72.1.1.5.6.11	INTEGER	read-only	The maximum amount of time in seconds that a database spent on the work queue.
INT lnRepClusterServers	1.3.6.1.4.1.334.72.1.1.5.6.12	INTEGER	read-only	The number of other servers in the cluster that are receiving replications from this server.
INT lnRepClusterSessionBytesIn	1.3.6.1.4.1.334.72.1.1.5.6.13	INTEGER	read-only	The total number of bytes received during cluster replication
INT lnRepClusterSessionBytesOut	1.3.6.1.4.1.334.72.1.1.5.6.14	INTEGER	read-only	The total number of bytes sent during cluster replication
INT lnRepClusterSuccessful	1.3.6.1.4.1.334.72.1.1.5.6.15	INTEGER	read-only	The number of successful replications since server startup.
INT lnRepClusterWorkQueueDepth	1.3.6.1.4.1.334.72.1.1.5.6.16	INTEGER	read-only	The current number of databases awaiting replication by the cluster replicator.
INT lnRepClusterWorkQueueDepthAvg	1.3.6.1.4.1.334.72.1.1.5.6.17	INTEGER	read-only	The average work queue depth since server startup.
INT lnRepClusterWorkQueueDepthMax	1.3.6.1.4.1.334.72.1.1.5.6.18	INTEGER	read-only	The maximum depth reached by the work queue since server startup.
lnServer	1.3.6.1.4.1.334.72.1.1.6
lnServerTask	1.3.6.1.4.1.334.72.1.1.6.1
INT lnTaskCount	1.3.6.1.4.1.334.72.1.1.6.1.1	INTEGER	read-only	Number of Notes server tasks currently executing.
lnTaskTable	1.3.6.1.4.1.334.72.1.1.6.1.2		not-accessible	A table containing one entry for each Notes server task that is actually running.
lnTaskEntry	1.3.6.1.4.1.334.72.1.1.6.1.2.1		not-accessible	The entry type definition for the lnTaskTable.
INT lnTaskIndex	1.3.6.1.4.1.334.72.1.1.6.1.2.1.1	INTEGER	read-only	A unique value for each entry in lnTaskTable.
INT lnTaskType	1.3.6.1.4.1.334.72.1.1.6.1.2.1.2	INTEGER	read-only	The type of server task being represented by this entry
STR lnTaskData	1.3.6.1.4.1.334.72.1.1.6.1.2.1.3	DisplayString	read-only	Information associated with this task entry. See the description for lnTaskType.
STR lnTaskName	1.3.6.1.4.1.334.72.1.1.6.1.2.1.4	DisplayString	read-only	The actual name of the task as it appears in the SERVER.TASK statistic on the server
STR lnReplicatorStatus	1.3.6.1.4.1.334.72.1.1.6.1.3	DisplayString	read-only	Status of the Replicator task. Provided as a separate MIB variable for the sake of efficiency.
STR lnRouterStatus	1.3.6.1.4.1.334.72.1.1.6.1.4	DisplayString	read-only	Status of the Router task. Provided as a separate MIB variable for the sake of efficiency.
STR lnEventStatus	1.3.6.1.4.1.334.72.1.1.6.1.5	DisplayString	read-only	Status of the Event task. Provided as a separate MIB variable for the sake of efficiency.
lnServerInfo	1.3.6.1.4.1.334.72.1.1.6.2
STR lnServerName	1.3.6.1.4.1.334.72.1.1.6.2.1	DisplayString	read-only	Server Name.
STR lnServerTitle	1.3.6.1.4.1.334.72.1.1.6.2.2	DisplayString	read-only	Title assigned to this server.
STR lnServerAdministrators	1.3.6.1.4.1.334.72.1.1.6.2.3	DisplayString	read-only	Contents of Administrator field from server record in Public Address book.
STR lnServerNotesVersion	1.3.6.1.4.1.334.72.1.1.6.2.4	DisplayString	read-only	Release of the Notes server that is running.
STR lnServerSystemVersion	1.3.6.1.4.1.334.72.1.1.6.2.5	DisplayString	read-only	Release of the Operating System running on the server.
INT lnServerBootID	1.3.6.1.4.1.334.72.1.1.6.2.6	INTEGER	read-only	Unique number identifying the time this server was last booted.
STR lnServerDataPath	1.3.6.1.4.1.334.72.1.1.6.2.7	DisplayString	read-only	Drive and directory defined as this server's data directory.
STR lnServerSwapPath	1.3.6.1.4.1.334.72.1.1.6.2.8	DisplayString	read-only	Drive and directory for this server's swap file (NOTE: this stat relies on the NOTES.INI variable 'SWAPPATH' if config.sys contains a swap path different from the default.)
INT lnServerRS232Ports	1.3.6.1.4.1.334.72.1.1.6.2.9	INTEGER	read-only	Number of RS232 ports on this server.
INT lnServerCoprocessor	1.3.6.1.4.1.334.72.1.1.6.2.10	INTEGER	read-only	Returns 'Yes', if server is a 486 or 386 w/ 387, otherwise, Returns 'No'.
INT lnServerOS	1.3.6.1.4.1.334.72.1.1.6.2.11	INTEGER	read-only	Operating System the current Notes server is running.
INT lnServerCPUCount	1.3.6.1.4.1.334.72.1.1.6.2.12	INTEGER	read-only	The number of processors installed on this server.
STR lnServerCPUType	1.3.6.1.4.1.334.72.1.1.6.2.13	DisplayString	read-only	The type of processor installed on the server (386,486, Pentium, etc).
lnServerUsersTable	1.3.6.1.4.1.334.72.1.1.6.2.14		not-accessible	A table containing one entry for each Notes user on the server.
lnServerUsersEntry	1.3.6.1.4.1.334.72.1.1.6.2.14.1		not-accessible	The entry type definition for the lnServerUsersTable.
INT lnServerUsersIndex	1.3.6.1.4.1.334.72.1.1.6.2.14.1.1	INTEGER	read-only	A unique value for each entry in lnServerUsersTable.
STR lnServerUserName	1.3.6.1.4.1.334.72.1.1.6.2.14.1.2	DisplayString	read-only	Notes UserName of server user.
STR lnServerUserSessionID	1.3.6.1.4.1.334.72.1.1.6.2.14.1.3	DisplayString	read-only	The user's Notes session ID.
INT lnServerUserAccessedDBs	1.3.6.1.4.1.334.72.1.1.6.2.14.1.4	INTEGER	read-only	The number of databases accessed by the users.
STR lnServerPorts	1.3.6.1.4.1.334.72.1.1.6.2.15	DisplayString	read-only	A list of ports on the server.
STR lnServerPoweredBy	1.3.6.1.4.1.334.72.1.1.6.2.16	DisplayString	read-only	Indicates what is powering the Domino server. A value here would indicate the system is running Release 4.5 or better of the Domino server. Value should = Notes
lnServerStats	1.3.6.1.4.1.334.72.1.1.6.3
INT lnServerDroppedSessions	1.3.6.1.4.1.334.72.1.1.6.3.1	INTEGER	read-only	Number of dropped sessions.
INT lnServerTransPerMin	1.3.6.1.4.1.334.72.1.1.6.3.2	INTEGER	read-only	Average number of transactions per minute since the server was started.
INT lnServerTransPerMinPeak	1.3.6.1.4.1.334.72.1.1.6.3.3	INTEGER	read-only	Peak number of transactions that took place in any given minute since the server was started.
INT lnServerTransPerMinPeakTime	1.3.6.1.4.1.334.72.1.1.6.3.4	INTEGER	read-only	Date and time when the peak number of transactions per minute was last reached. Represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch).
INT lnServerTransTotal	1.3.6.1.4.1.334.72.1.1.6.3.5	INTEGER	read-only	Total number of transactions the server has completed since it was started.
INT lnServerUsers	1.3.6.1.4.1.334.72.1.1.6.3.6	INTEGER	read-only	Number of users with sessions open on the server.
INT lnServerUsers1MinPeak	1.3.6.1.4.1.334.72.1.1.6.3.7	INTEGER	read-only	The peak number of concurrent users active within the last minute.
INT lnServerUsers1MinPeakTime	1.3.6.1.4.1.334.72.1.1.6.3.8	INTEGER	read-only	Date and time when the peak number of active concurrent users were reached within the last minute. Represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch).
INT lnServerUsers5MinPeak	1.3.6.1.4.1.334.72.1.1.6.3.9	INTEGER	read-only	The peak number of concurrent users that were active within the last five minutes.
INT lnServerUsers5MinPeakTime	1.3.6.1.4.1.334.72.1.1.6.3.10	INTEGER	read-only	Date and time when the peak number of active concurrent users were reached within the last five minutes. Represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch).
INT lnServerUsersPeak	1.3.6.1.4.1.334.72.1.1.6.3.11	INTEGER	read-only	The peak number of concurrent users with open sessions since the server was started.
INT lnServerUsersPeakTime	1.3.6.1.4.1.334.72.1.1.6.3.12	INTEGER	read-only	Date and time when the peak number of concurrent users with open sessions was last reached. Represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch).
INT lnServerOpenReqMaxUsers	1.3.6.1.4.1.334.72.1.1.6.3.13	INTEGER	read-only	The number of times that a client has attempted to open a database on this server when the server was at its MAXUSERS limit.
INT lnServerOpenReqPreV4Client	1.3.6.1.4.1.334.72.1.1.6.3.14	INTEGER	read-only	The number of times Notes Release 4.0 (or higher) clients have attempted to open a database on this server.
INT lnServerOpenReqRestricted	1.3.6.1.4.1.334.72.1.1.6.3.15	INTEGER	read-only	The number of times that a client has attempted to open a database on this server when the server was RESTRICTED.
INT lnServerOpenReqV4Client	1.3.6.1.4.1.334.72.1.1.6.3.16	INTEGER	read-only	The number of times Notes Clients post Release 4.0 have attempted to open a database on this server.
INT lnServerBusyTimeQueryReceivedCount	1.3.6.1.4.1.334.72.1.1.6.3.17	INTEGER	read-only	The number of external 'busytime' queries the server has received.
INT lnServerBusyTimeQueryRetObjSched	1.3.6.1.4.1.334.72.1.1.6.3.18	INTEGER	read-only	The number of schedules that were returned by queries counted by lnServerBusyTimeQueriesReceivedCount
lnCluster	1.3.6.1.4.1.334.72.1.1.6.4
STR lnClusterName	1.3.6.1.4.1.334.72.1.1.6.4.1	DisplayString	read-only	The name of the cluster this server is a member of.
INT lnClusterAvailIndex	1.3.6.1.4.1.334.72.1.1.6.4.2	INTEGER	read-only	The current percentage or an index of the current server's availability. A value of 0 indicates that the server has virtually no available resources. A value of 100 indicates that the server is completely available.
INT lnClusterAvailThreshold	1.3.6.1.4.1.334.72.1.1.6.4.3	INTEGER	read-only	The current setting of this server's availability threshold. The value is compared against lnClusterAvailIndex. BUSY - The availability index has dropped below the threshold.
STR lnClusterPortName	1.3.6.1.4.1.334.72.1.1.6.4.4	DisplayString	read-only	Default PortName being used for intra cluster network traffic. There is no default port. Any available and active port may be used for intra cluster traffic.
INT lnClusterProbeCount	1.3.6.1.4.1.334.72.1.1.6.4.5	INTEGER	read-only	The total number of times this cluster member has completed a probe request for another cluster member.
INT lnClusterProbeTimeout	1.3.6.1.4.1.334.72.1.1.6.4.6	INTEGER	read-only	In Minutes. The interval between intra cluster probes or cluster member heartbeats.
lnClusterTable	1.3.6.1.4.1.334.72.1.1.6.4.7		read-only	A table containing one entry for each configured Notes server cluster member known by this server.
lnClusterEntry	1.3.6.1.4.1.334.72.1.1.6.4.7.1		read-only	The entry type definition for the lnClusterTable.
INT lnClusterTableIndex	1.3.6.1.4.1.334.72.1.1.6.4.7.1.1	INTEGER	read-only	A unique value for each entry in the lnClusterTable.
STR lnClusterMemberName	1.3.6.1.4.1.334.72.1.1.6.4.7.1.2	DisplayString	read-only	Name of Notes Cluster Member.
STR lnClusterMemberIndex	1.3.6.1.4.1.334.72.1.1.6.4.7.1.3	DisplayString	read-only	The last known load information for a cluster member.
lnOpenRedirects	1.3.6.1.4.1.334.72.1.1.6.4.8
INT lnClusterFailoverByPathSucc	1.3.6.1.4.1.334.72.1.1.6.4.8.1	INTEGER	read-only	The number of times this server was successfully able to redirect a client to another cluster member after the client was unable to open a database by pathname on a cluster member.
INT lnClusterFailoverByPathUnsucc	1.3.6.1.4.1.334.72.1.1.6.4.8.2	INTEGER	read-only	The number of times this server was unsuccessful at redirecting a client to another cluster member after the client was unable to open a database by pathname for a cluster member.
INT lnClusterFailoverSucc	1.3.6.1.4.1.334.72.1.1.6.4.8.3	INTEGER	read-only	The number of times this server was successfully able to redirect a client to another cluster member after the client was unable to open a database by replica ID on a cluster member.
INT lnClusterFailoverUnsucc	1.3.6.1.4.1.334.72.1.1.6.4.8.4	INTEGER	read-only	The number of times this server was unsuccessful at redirecting a client to another cluster member after the client was unable to open a database by replica ID on a cluster member.
INT lnClusterLoadBalByPathSucc	1.3.6.1.4.1.334.72.1.1.6.4.8.5	INTEGER	read-only	The number of times this server was successfully able to redirect a client to another cluster member after the client attempted to open a database by pathname on a cluster member that was BUSY.
INT lnClusterLoadBalByPathUnsucc	1.3.6.1.4.1.334.72.1.1.6.4.8.6	INTEGER	read-only	The number of times this server was unsuccessful at redirecting a client to another cluster member after the client attempted to open a database by pathname on a cluster member that was BUSY.
INT lnClusterLoadBalSucc	1.3.6.1.4.1.334.72.1.1.6.4.8.7	INTEGER	read-only	The number of times this server was successfully able to redirect a client to another cluster member after the client attempted to open a database by replica ID on a cluster member that was BUSY.
INT lnClusterLoadBalUnsucc	1.3.6.1.4.1.334.72.1.1.6.4.8.8	INTEGER	read-only	The number of times this server was unsuccessful at redirecting a client to another cluster member after the client attempted to open a database by replica ID on a cluster member that was BUSY.
lnOpenRequest	1.3.6.1.4.1.334.72.1.1.6.4.9
INT lnClusterOpenReqClustBusy	1.3.6.1.4.1.334.72.1.1.6.4.9.1	INTEGER	read-only	The number of times that a client attempted to open a database on this cluster member when it and the rest of the cluster were BUSY.
INT lnClusterOpenReqDBOutofServ	1.3.6.1.4.1.334.72.1.1.6.4.9.2	INTEGER	read-only	The number of times a client attempted to open a database that has been marked as out of service on this cluster member.
INT lnClusterOpenReqLoadBalanced	1.3.6.1.4.1.334.72.1.1.6.4.9.3	INTEGER	read-only	The number of times a client attempted to open a database on this cluster member when the cluster member was BUSY.
lnClusterTrans	1.3.6.1.4.1.334.72.1.1.6.4.10
INT lnClusterTransIntAvgTime	1.3.6.1.4.1.334.72.1.1.6.4.10.1	INTEGER	read-only	Average transaction time (in milliseconds) for this member of the cluster. Based on transaction data captured over a number of recent intervals of time.
INT lnClusterTransIntInSec	1.3.6.1.4.1.334.72.1.1.6.4.10.2	INTEGER	read-only	Current setting for the length of the intervals. Used to capture transaction data for load balance computations.
INT lnClusterTransIntUsedInAvg	1.3.6.1.4.1.334.72.1.1.6.4.10.3	INTEGER	read-only	Current setting of the number for intervals being used to capture transaction data on load balance computations.
INT lnClusterTransLastIntAvgTime	1.3.6.1.4.1.334.72.1.1.6.4.10.4	INTEGER	read-only	Average transaction time for the last interval of transaction data captured on this cluster member.
INT lnClusterTransNormValue	1.3.6.1.4.1.334.72.1.1.6.4.10.5	INTEGER	read-only	The current setting for the acceptable average transaction time (in milliseconds) on this cluster member.
INT lnClusterProbeError	1.3.6.1.4.1.334.72.1.1.6.4.11	INTEGER	read-only	The number of times a server received an error while probing another server.
lnComm	1.3.6.1.4.1.334.72.1.1.7
INT lnNumClosedOldSessions	1.3.6.1.4.1.334.72.1.1.7.1	INTEGER	read-only	Number of sessions dropped because of too many concurrent users.
lnNetbiosTable	1.3.6.1.4.1.334.72.1.1.7.2		not-accessible	A table containing one entry for each active NetBIOS port on the server. Notes R3 only.
lnNetbiosEntry	1.3.6.1.4.1.334.72.1.1.7.2.1		not-accessible	The entry type definition for the lnNetbiosTable, Notes R3
INT lnNBIndex	1.3.6.1.4.1.334.72.1.1.7.2.1.1	INTEGER	read-only	A unique value for each entry in lnNetbiosTable.
STR lnNBPort	1.3.6.1.4.1.334.72.1.1.7.2.1.2	DisplayString	read-only	NetBIOS port associated with this table entry.
INT lnNBUnitNumber	1.3.6.1.4.1.334.72.1.1.7.2.1.3	INTEGER	read-only	Unit number for this NetBIOS port.
INT lnNBMajVersion	1.3.6.1.4.1.334.72.1.1.7.2.1.4	INTEGER	read-only	Major version number of the NetBIOS driver being run on this port.
INT lnNMMinVersion	1.3.6.1.4.1.334.72.1.1.7.2.1.5	INTEGER	read-only	Minor version number of the NetBIOS driver being run on this port.
INT lnNBReportPeriod	1.3.6.1.4.1.334.72.1.1.7.2.1.6	INTEGER	read-only	Period of time over which the statistics for this port have been accumulating.
INT lnNBInUseSessions	1.3.6.1.4.1.334.72.1.1.7.2.1.7	INTEGER	read-only	Number of NetBIOS sessions currently in use.
INT lnNBMaxSessions	1.3.6.1.4.1.334.72.1.1.7.2.1.8	INTEGER	read-only	Maximum number of concurrent NetBIOS sessions configured for this port.
INT lnNBAvailCmdBlocks	1.3.6.1.4.1.334.72.1.1.7.2.1.9	INTEGER	read-only	The number of NetBIOS command blocks which are currently available for use.
INT lnNBTotalCmdBlocks	1.3.6.1.4.1.334.72.1.1.7.2.1.10	INTEGER	read-only	Maximum number of NetBIOS command blocks configured for this port.
INT lnNBPacketSize	1.3.6.1.4.1.334.72.1.1.7.2.1.11	INTEGER	read-only	Packet size for this NetBIOS port (in bytes).
INT lnNBReceivedPackets	1.3.6.1.4.1.334.72.1.1.7.2.1.12	INTEGER	read-only	Total number of packets received by this port.
INT lnNBSentPackets	1.3.6.1.4.1.334.72.1.1.7.2.1.13	INTEGER	read-only	Total number of packets sent from this port.
INT lnNBAbortedTransmissions	1.3.6.1.4.1.334.72.1.1.7.2.1.14	INTEGER	read-only	Number of aborted transmissions for this port.
INT lnNBRetriedTransmissions	1.3.6.1.4.1.334.72.1.1.7.2.1.15	INTEGER	read-only	Number of retried transmissions for this port.
INT lnNBAlignmentErrors	1.3.6.1.4.1.334.72.1.1.7.2.1.16	INTEGER	read-only	Number of alignment errors for this port.
INT lnNBCollisionErrors	1.3.6.1.4.1.334.72.1.1.7.2.1.17	INTEGER	read-only	Number of collision errors for this port.
INT lnNBCRCErrors	1.3.6.1.4.1.334.72.1.1.7.2.1.18	INTEGER	read-only	Number of checksum errors for this port.
lnXPCTable	1.3.6.1.4.1.334.72.1.1.7.3		not-accessible	A table containing one entry for each active XPC port on the server.
lnXPCEntry	1.3.6.1.4.1.334.72.1.1.7.3.1		not-accessible	The entry type definition for the lnXPCTable.
INT lnXPCIndex	1.3.6.1.4.1.334.72.1.1.7.3.1.1	INTEGER	read-only	A unique value for each entry in the lnXPCTable.
STR lnXPCPort	1.3.6.1.4.1.334.72.1.1.7.3.1.2	DisplayString	read-only	XPC port associated with this table entry.
STR lnXPCStatus	1.3.6.1.4.1.334.72.1.1.7.3.1.3	DisplayString	read-only	The status of this XPC port.
INT lnXPCCarrierSpeed	1.3.6.1.4.1.334.72.1.1.7.3.1.4	INTEGER	read-only	Communication speed (in bits per second) between local modem and remote modem.
INT lnXPCPortSpeed	1.3.6.1.4.1.334.72.1.1.7.3.1.5	INTEGER	read-only	Communication speed (in bits per second) between server and local modem.
INT lnXPCActiveSessions	1.3.6.1.4.1.334.72.1.1.7.3.1.6	INTEGER	read-only	Number of active user sessions on this XPC port.
INT lnXPCKiloBytesReceived	1.3.6.1.4.1.334.72.1.1.7.3.1.7	INTEGER	read-only	Number of kilobytes received by this port.
INT lnXPCKiloBytesSent	1.3.6.1.4.1.334.72.1.1.7.3.1.8	INTEGER	read-only	Number of kilobytes sent by this port.
INT lnXPCMsgsReceived	1.3.6.1.4.1.334.72.1.1.7.3.1.9	INTEGER	read-only	Number of messages received by this port.
INT lnXPCMsgsSent	1.3.6.1.4.1.334.72.1.1.7.3.1.10	INTEGER	read-only	Number of messages sent by this port.
INT lnXPCCRCErrors	1.3.6.1.4.1.334.72.1.1.7.3.1.11	INTEGER	read-only	Number of checksum errors from this port.
INT lnXPCPortErrors	1.3.6.1.4.1.334.72.1.1.7.3.1.12	INTEGER	read-only	Number of port errors.
INT lnXPCRetransmissions	1.3.6.1.4.1.334.72.1.1.7.3.1.13	INTEGER	read-only	Number of retransmissions from this port.
INT lnAppleTalkStatsLogged	1.3.6.1.4.1.334.72.1.1.7.4	INTEGER	read-only	Number of AppleTalk statistics logged by the Notes server.
INT lnNetWareSPXIIStatsLogged	1.3.6.1.4.1.334.72.1.1.7.5	INTEGER	read-only	Number of NetWare SPX II statistics logged by the Notes server.
lnNetPortTable	1.3.6.1.4.1.334.72.1.1.7.6		not-accessible	A table containing one entry for each configured Notes network port on the server. This table is new to the MIB as of Notes Release 4. This table replaces most of the lnComm variables, remaining for backward compatibility, found in Release 3 of Notes.
lnNetPortEntry	1.3.6.1.4.1.334.72.1.1.7.6.1		not-accessible	The entry type definition for the lnNetPortTable. This is specific to Notes Release 4.
INT lnNetPortIndex	1.3.6.1.4.1.334.72.1.1.7.6.1.1	INTEGER	read-only	A unique value for each entry in lnPortTable.
STR lnNetPortName	1.3.6.1.4.1.334.72.1.1.7.6.1.2	DisplayString	read-only	The port name associate with this entry.
INT lnNetPortKBytesRec	1.3.6.1.4.1.334.72.1.1.7.6.1.3	INTEGER	read-only	Total kilobytes received on this port. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnNetPortKBytesSent	1.3.6.1.4.1.334.72.1.1.7.6.1.4	INTEGER	read-only	Total kilobytes sent on this port. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnNetPortSessEstIn	1.3.6.1.4.1.334.72.1.1.7.6.1.5	INTEGER	read-only	The number of inbound sessions established on this port.
INT lnNetPortSessEstOut	1.3.6.1.4.1.334.72.1.1.7.6.1.6	INTEGER	read-only	The number of outbound sessions established on this port.
INT lnNetPortSessLimit	1.3.6.1.4.1.334.72.1.1.7.6.1.7	INTEGER	read-only	The current limit on the number of concurrent sessions on the port.
INT lnNetPortSessLimitMax	1.3.6.1.4.1.334.72.1.1.7.6.1.8	INTEGER	read-only	Upward boundary of the range in which lnPortSessLimit may vary.
INT lnNetPortSessLimitMin	1.3.6.1.4.1.334.72.1.1.7.6.1.9	INTEGER	read-only	Lower boundary of the range in which lnPortSessLimit may vary.
INT lnNetPortSessPeak	1.3.6.1.4.1.334.72.1.1.7.6.1.10	INTEGER	read-only	The peak number of concurrent sessions on this port.
INT lnNetPortSessRecycled	1.3.6.1.4.1.334.72.1.1.7.6.1.11	INTEGER	read-only	Number of dropped sessions due to low network resources.
INT lnNetPortSessRecycling	1.3.6.1.4.1.334.72.1.1.7.6.1.12	INTEGER	read-only	Number of sessions currently being dropped due to low network resources.
INT lnSNARemoteLU	1.3.6.1.4.1.334.72.1.1.7.6.1.13	INTEGER	read-only	Remote LU.
INT lnSNALocalLU	1.3.6.1.4.1.334.72.1.1.7.6.1.14	INTEGER	read-only	Local LU.
INT lnSNALNCVersion	1.3.6.1.4.1.334.72.1.1.7.6.1.15	INTEGER	read-only	SNA LNC Version.
INT lnSNAVersion	1.3.6.1.4.1.334.72.1.1.7.6.1.16	INTEGER	read-only	SNA Version.
INT lnSNAMaxSessions	1.3.6.1.4.1.334.72.1.1.7.6.1.17	INTEGER	read-only	Maximum number of SNA sessions that can exist.
INT lnSNAActiveSessions	1.3.6.1.4.1.334.72.1.1.7.6.1.18	INTEGER	read-only	The total number of active SNA sessions.
INT lnSNATPType	1.3.6.1.4.1.334.72.1.1.7.6.1.19	INTEGER	read-only	SNA transaction program type.
INT lnSNATPState	1.3.6.1.4.1.334.72.1.1.7.6.1.20	INTEGER	read-only	SNA transaction program state.
INT lnSNAConversationId	1.3.6.1.4.1.334.72.1.1.7.6.1.21	INTEGER	read-only	SNA conversation ID.
INT lnSNAMaxSendRUSize	1.3.6.1.4.1.334.72.1.1.7.6.1.22	INTEGER	read-only	Maximum send request unit size sent.
INT lnSNAMaxRcvRUSize	1.3.6.1.4.1.334.72.1.1.7.6.1.23	INTEGER	read-only	Maximum send request unit size received.
INT lnSNASendPacingSize	1.3.6.1.4.1.334.72.1.1.7.6.1.24	INTEGER	read-only	The maximum number of outstanding request units which can be transmitted before receiving a pacing response from the remote LU.
INT lnSNARcvPacingSize	1.3.6.1.4.1.334.72.1.1.7.6.1.25	INTEGER	read-only	The maximum number of oustanding request units which can be received before transmitting a pacing response to the remote LU.
INT lnSNAPacingType	1.3.6.1.4.1.334.72.1.1.7.6.1.26	INTEGER	read-only	The SNA pacing size was originally determined at the creation of a session and remained constant through the life of the session. More recent implementations allow the pacing size to dynamically change through the life of the session to increase efficiency and take advantage of available buffers. This number represents the type of pacing done.
INT lnX25LocalResets	1.3.6.1.4.1.334.72.1.1.7.6.1.27	INTEGER	read-only	The total number of local resets on this X25 port.
INT lnX25RemoteResets	1.3.6.1.4.1.334.72.1.1.7.6.1.28	INTEGER	read-only	The total number of remote resets on this X25 port.
INT lnX25WindowSize	1.3.6.1.4.1.334.72.1.1.7.6.1.29	INTEGER	read-only	The window size on this X25 port.
INT lnX25FrameSize	1.3.6.1.4.1.334.72.1.1.7.6.1.30	INTEGER	read-only	The network frame size on this X25 port.
INT lnX25PktSize	1.3.6.1.4.1.334.72.1.1.7.6.1.31	INTEGER	read-only	The network packet size on this X25 port.
INT lnX25UnderRuns	1.3.6.1.4.1.334.72.1.1.7.6.1.32	INTEGER	read-only	This occurs when data is not given to the UART on an X.25 board fast enough for it to generate a complete packet on the wire.
INT lnX25OverRuns	1.3.6.1.4.1.334.72.1.1.7.6.1.33	INTEGER	read-only	This occurs when data is given to the UART on an X.25 board faster than the board can generate packets to put on the wire.
INT lnX25REJTran	1.3.6.1.4.1.334.72.1.1.7.6.1.34	INTEGER	read-only	The total number of REJs transmitted by this X25 port.
INT lnX25REJRcv	1.3.6.1.4.1.334.72.1.1.7.6.1.35	INTEGER	read-only	The total number of REJs received by this X25 port.
INT lnX25VCCfg	1.3.6.1.4.1.334.72.1.1.7.6.1.36	INTEGER	read-only	The total number of virtual circuits configured on this X25 port.
INT lnX25VCInUse	1.3.6.1.4.1.334.72.1.1.7.6.1.37	INTEGER	read-only	The total number of virtual circuits currently in use on this X25 port.
INT lnX25CRCErrors	1.3.6.1.4.1.334.72.1.1.7.6.1.38	INTEGER	read-only	The remote DTE address on this X25 port.
INT lnX25LocalDTEAddress	1.3.6.1.4.1.334.72.1.1.7.6.1.39	INTEGER	read-only	The local DTE address on this X25 port.
lnDisk	1.3.6.1.4.1.334.72.1.1.8
INT lnDiskFixed	1.3.6.1.4.1.334.72.1.1.8.1	INTEGER	read-only	Number of fixed disks configured on this server.
INT lnDiskFreeSwap	1.3.6.1.4.1.334.72.1.1.8.2	INTEGER	read-only	Amount of free space left in swap area (in kilobytes).
lnDriveTable	1.3.6.1.4.1.334.72.1.1.8.3		not-accessible	A table containing one entry for each disk (including network disks) configured on the server.
lnDriveEntry	1.3.6.1.4.1.334.72.1.1.8.3.1		not-accessible	The entry type definition for the lnDriveTable.
INT lnDriveIndex	1.3.6.1.4.1.334.72.1.1.8.3.1.1	INTEGER	read-only	A unique value for each entry in lnDriveTable.
STR lnDriveLetter	1.3.6.1.4.1.334.72.1.1.8.3.1.2	DisplayString	read-only	The drive letter of the disk associated with this entry.
INT lnDriveSize	1.3.6.1.4.1.334.72.1.1.8.3.1.3	INTEGER	read-only	The total size of this drive in kilobytes. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnDriveFree	1.3.6.1.4.1.334.72.1.1.8.3.1.4	INTEGER	read-only	The amount of free space left on this drive in kilobytes. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnDiskRemote	1.3.6.1.4.1.334.72.1.1.8.4	INTEGER	read-only	The number of network disks or volumes mounted.
lnMem	1.3.6.1.4.1.334.72.1.1.9
INT lnMemAllocTotal	1.3.6.1.4.1.334.72.1.1.9.1	INTEGER	read-only	Total memory allocated (should be sum of process and shared).
INT lnMemAllocProcess	1.3.6.1.4.1.334.72.1.1.9.2	INTEGER	read-only	Total process-private memory allocated by all currently-running processes.
INT lnMemAllocShared	1.3.6.1.4.1.334.72.1.1.9.3	INTEGER	read-only	Total shared memory allocated.
STR lnMemAvailability	1.3.6.1.4.1.334.72.1.1.9.4	DisplayString	read-only	Available memory on this server.
INT lnMemFree	1.3.6.1.4.1.334.72.1.1.9.5	INTEGER	read-only	Total free memory, reported in kilobytes, as shown in the MEM.FREE Notes statistic. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnMemSwapSize	1.3.6.1.4.1.334.72.1.1.9.6	INTEGER	read-only	Size of swap file (NOTE: this stat relies on the NOTES.INI variable 'SWAPPATH' if config.sys contains a swap path different from the default.)
INT lnMemPhysicalRAM	1.3.6.1.4.1.334.72.1.1.9.7	INTEGER	read-only	The total amount of physical memory on the server.
lnDatabase	1.3.6.1.4.1.334.72.1.1.10
INT lnDBBufferControlPoolSize	1.3.6.1.4.1.334.72.1.1.10.1	INTEGER	read-only	Size of the buffer control pool.
INT lnDBBufferControlPoolUsed	1.3.6.1.4.1.334.72.1.1.10.2	INTEGER	read-only	Number of bytes used in buffer control pool. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnDBBufferPoolAllocated	1.3.6.1.4.1.334.72.1.1.10.3	INTEGER	read-only	Number of bytes allocated from the buffer pool.
INT lnDBBufferPoolMaximum	1.3.6.1.4.1.334.72.1.1.10.4	INTEGER	read-only	Maximum size of the buffer pool.
INT lnDBBufferPoolUsed	1.3.6.1.4.1.334.72.1.1.10.5	INTEGER	read-only	Number of used buffers from the buffer pool.
INT lnDBNSFPoolSize	1.3.6.1.4.1.334.72.1.1.10.6	INTEGER	read-only	Size of NSF pool.
INT lnDBNSFPoolUsed	1.3.6.1.4.1.334.72.1.1.10.7	INTEGER	read-only	Amount of space used in NSF pool. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnDBBufferPoolPercentReadsInBuffer	1.3.6.1.4.1.334.72.1.1.10.8	INTEGER	read-only	Percentage of buffer pool reads.
INT lnDBBufferPoolReads	1.3.6.1.4.1.334.72.1.1.10.9	INTEGER	read-only	Number of database buffer pool reads.
INT lnDBBufferPoolWrites	1.3.6.1.4.1.334.72.1.1.10.10	INTEGER	read-only	Number of database buffer pool writes.
INT lnDBNIFPoolSize	1.3.6.1.4.1.334.72.1.1.10.11	INTEGER	read-only	Size of database NIF pool.
INT lnDBNIFPoolUsed	1.3.6.1.4.1.334.72.1.1.10.12	INTEGER	read-only	Number of database NIF pools. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnDBNIFPoolPeak	1.3.6.1.4.1.334.72.1.1.10.13	INTEGER	read-only	The peak number of database NIF pools. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnDBNSFPoolPeak	1.3.6.1.4.1.334.72.1.1.10.14	INTEGER	read-only	The peak number of database NSF pools. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnDBCacheCurrentEntries	1.3.6.1.4.1.334.72.1.1.10.15	INTEGER	read-only	The number of databases currently in the cache. Administrators should monitor this number to see whether it approaches the NSF-DBCACHE-MAXENTRIES setting. If it does, this indicates the cache is under pressure. If this situation occurs frequently, the administrator should increase the setting for NSF-DBCACHE-MAXENTRIES.
INT lnDBCacheHighWaterMark	1.3.6.1.4.1.334.72.1.1.10.16	INTEGER	read-only	The maximum number of databases in the cache during this running of the Domino server program. Note that this number may be artificially high due to startup activity, so it may be of limited use as a genuine indicator of cache performance.
INT lnDBCacheHits	1.3.6.1.4.1.334.72.1.1.10.17	INTEGER	read-only	The number of times an lnDBCacheInitialDbOpen is satisfied by finding a database in the cache. A high 'hits-to-opens' ratio indicates the database cache is working effectively, since most users are opening databases in the cache without having to wait for the usual time required by an initial (non-cache) open. If the ratio is low (in other words, more users are having to wait for databases not in the cache to open), the administrator can increase the NSF-DBCACHE-MAXENTRIES settings.
INT lnDBCacheInitialDbOpens	1.3.6.1.4.1.334.72.1.1.10.18	INTEGER	read-only	The number of times a user/server opened a database that was not already being used by another user/server. By comparing this number to lnDBCacheHits, administrators can gauge the effectiveness of the cache.
INT lnDBCacheLookups	1.3.6.1.4.1.334.72.1.1.10.19	INTEGER	read-only	The number of lookups performed on the cache.
INT lnDBCacheMaxEntries	1.3.6.1.4.1.334.72.1.1.10.20	INTEGER	read-only	The number of databases that the server can currently hold in its cache at once.
INT lnDBCacheOvercrowdingRejections	1.3.6.1.4.1.334.72.1.1.10.21	INTEGER	read-only	The number of times a database is not placed into the cache when it is closed because lnDBCacheCurrentEntries equals or exceeds lnDBCacheMaxEntries*1.5. This number should stay low. If it begins to rise, you should increase the NSF-DbCache-Maxentries settings.
INT lnDBBufferControlPoolPeak	1.3.6.1.4.1.334.72.1.1.10.22	INTEGER	read-only	The peak size of buffer control pool. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
lnAgentMgr	1.3.6.1.4.1.334.72.1.1.11
INT lnDailyAccessDenials	1.3.6.1.4.1.334.72.1.1.11.1	INTEGER	read-only	The number of times the agent manager failed to execute a given task, probably due to ACL restrictions.
INT lnDailyScheduledRuns	1.3.6.1.4.1.334.72.1.1.11.2	INTEGER	read-only	The number of tasks that the agent manager has scheduled to run during the course of the day.
INT lnDailyTriggeredRuns	1.3.6.1.4.1.334.72.1.1.11.3	INTEGER	read-only	The number of tasks that the agent manager has had triggered to run by an event during the course of the day.
INT lnDailyUnsuccessfulRuns	1.3.6.1.4.1.334.72.1.1.11.4	INTEGER	read-only	The number of tasks the agent manager has unsuccessfully run during the course of the day.
STR lnDailyUsedRunTime	1.3.6.1.4.1.334.72.1.1.11.5	DisplayString	read-only	The number of seconds used to run an agent.
INT lnHourlyAccessDenials	1.3.6.1.4.1.334.72.1.1.11.6	INTEGER	read-only	The number of tasks that the agent manager failed to execute during the last hour, probably due to ACL restrictions.
INT lnHourlyScheduledRuns	1.3.6.1.4.1.334.72.1.1.11.7	INTEGER	read-only	The number of tasks the agent manager has scheduled to run during the last hour.
INT lnHourlyTriggeredRuns	1.3.6.1.4.1.334.72.1.1.11.8	INTEGER	read-only	The number of tasks the agent manager has had triggered to run by an event during the last hour.
INT lnHourlyUnsuccessfulRuns	1.3.6.1.4.1.334.72.1.1.11.9	INTEGER	read-only	The number of tasks the agent manager has unsuccessfully run during the last hour.
STR lnHourlyUsedRunTime	1.3.6.1.4.1.334.72.1.1.11.10	DisplayString	read-only	The number of seconds to run an agent.
lnMTA	1.3.6.1.4.1.334.72.1.1.12
lnMTATable	1.3.6.1.4.1.334.72.1.1.12.1		not-accessible	A table containing one entry for each running Notes server MTA.
lnMTAEntry	1.3.6.1.4.1.334.72.1.1.12.1.1		not-accessible	The entry type definition for the lnMTATable.
INT lnMTAIndex	1.3.6.1.4.1.334.72.1.1.12.1.1.1	INTEGER	read-only	A unique value for each MTA running on the Notes server.
STR lnMTAName	1.3.6.1.4.1.334.72.1.1.12.1.1.2	DisplayString	read-only	A string representing the name of a MTA running on the Notes server.
INT lnMTADeadMsgs	1.3.6.1.4.1.334.72.1.1.12.1.1.3	INTEGER	read-only	The number of dead mail messages. (Messages that are stuck in the MTA queue.)
INT lnMTAWaitingRecp	1.3.6.1.4.1.334.72.1.1.12.1.1.4	INTEGER	read-only	The number of recipients for pending mail. (The number of recipients responsible for lnMTAWaitingMsgs.)
INT lnMTAWaitingMsgs	1.3.6.1.4.1.334.72.1.1.12.1.1.5	INTEGER	read-only	The amount of mail awaiting routing. (The number of messages that are in the process of being routed.)
INT lnMTATransferFailures	1.3.6.1.4.1.334.72.1.1.12.1.1.6	INTEGER	read-only	The number of messages the MTA could not transfer.
INT lnMTATotalKBTransferred	1.3.6.1.4.1.334.72.1.1.12.1.1.7	INTEGER	read-only	The total number of kilobyte transferred outbound or into any of the .box's by this MTA.
INT lnMTATransferredMsgs	1.3.6.1.4.1.334.72.1.1.12.1.1.8	INTEGER	read-only	The total number of messages transferred outbound or into any of the .box's by this MTA.
INT lnMTATotalRouted	1.3.6.1.4.1.334.72.1.1.12.1.1.9	INTEGER	read-only	The total amount of mail routed (# of recipients routed to) outbound or into any of the .box's.
lnWeb	1.3.6.1.4.1.334.72.1.1.13
INT lnWebAccessFtp	1.3.6.1.4.1.334.72.1.1.13.1	INTEGER	read-only	The number of FTP connections on this Web server.
INT lnWebAccessGopher	1.3.6.1.4.1.334.72.1.1.13.2	INTEGER	read-only	The number of Gopher connections on this Web server.
INT lnWebAccessHttp	1.3.6.1.4.1.334.72.1.1.13.3	INTEGER	read-only	The number of HTTP connections on this Web server.
INT lnWebKBytesReceived	1.3.6.1.4.1.334.72.1.1.13.4	INTEGER	read-only	Total kilobytes received by this Web server.
INT lnWebKBytesSent	1.3.6.1.4.1.334.72.1.1.13.5	INTEGER	read-only	Total kilobytes sent by this Web server.
INT lnWebImageCacheHits	1.3.6.1.4.1.334.72.1.1.13.6	INTEGER	read-only	The number of successful hits on the image cache.
INT lnWebImageCacheMisses	1.3.6.1.4.1.334.72.1.1.13.7	INTEGER	read-only	The number of image cache misses.
STR lnWebLogMessages	1.3.6.1.4.1.334.72.1.1.13.8	DisplayString	read-only	'Yes' if message logging is turned on.
INT lnWebActiveProcesses	1.3.6.1.4.1.334.72.1.1.13.9	INTEGER	read-only	The number of active Web Retriever processes.
INT lnWebBusyProcesses	1.3.6.1.4.1.334.72.1.1.13.10	INTEGER	read-only	The number of Web Retriever processes currently busy working.
INT lnWebIdleProcesses	1.3.6.1.4.1.334.72.1.1.13.11	INTEGER	read-only	The number of Web Retriever processes that are sitting idle.
INT lnWebMaxProcesses	1.3.6.1.4.1.334.72.1.1.13.12	INTEGER	read-only	The maximum number of Web Retriever processes allowable on this server.
STR lnWebProcessState	1.3.6.1.4.1.334.72.1.1.13.13	DisplayString	read-only	The number of image cache misses.
STR lnWebTimeCurrent	1.3.6.1.4.1.334.72.1.1.13.14	DisplayString	read-only	The current time, as set on this Web Retriever.
STR lnWebTimeDuration	1.3.6.1.4.1.334.72.1.1.13.15	DisplayString	read-only	Shows the amount of time this Web Retriever has been running.
STR lnWebTimeStart	1.3.6.1.4.1.334.72.1.1.13.16	DisplayString	read-only	The time the Web Retriever processes started.
INT lnWebUrlFail	1.3.6.1.4.1.334.72.1.1.13.17	INTEGER	read-only	The number URL requests that have failed on this Web Retriever.
INT lnWebUrlRequested	1.3.6.1.4.1.334.72.1.1.13.18	INTEGER	read-only	The total number of URL requests on this Web Retriever.
INT lnWebUrlSucceeded	1.3.6.1.4.1.334.72.1.1.13.19	INTEGER	read-only	The number of URL requests successfully completed on this server.
STR lnWebRetrieverVersion	1.3.6.1.4.1.334.72.1.1.13.20	DisplayString	read-only	The version of the Web Retriever software that is running.
INT lnWebVpoolMaxBuf	1.3.6.1.4.1.334.72.1.1.13.21	INTEGER	read-only	The number of buffer VPOOLs which have reached maximum size.
INT lnWebVpoolMaxElement	1.3.6.1.4.1.334.72.1.1.13.22	INTEGER	read-only	The number of element VPOOLs which have reached maximum size.
INT lnWebVpoolMaxMarker	1.3.6.1.4.1.334.72.1.1.13.23	INTEGER	read-only	The number of marker VPOOLs which have reached maximum size.
INT lnWebVpoolMaxText	1.3.6.1.4.1.334.72.1.1.13.24	INTEGER	read-only	The number of text VPOOLs which have reached maximum size.
INT lnWebVpoolMaxUrl	1.3.6.1.4.1.334.72.1.1.13.25	INTEGER	read-only	The number of URL VPOOLs which have reached maximum size.
lnWebProcessTable	1.3.6.1.4.1.334.72.1.1.13.26		not-accessible	This table will show statistics for all Web Retriever processes on the server.
lnWebProcEntry	1.3.6.1.4.1.334.72.1.1.13.26.1		not-accessible	This defines the MIB variables specific to each Web Retriever process.
INT lnWebProcIndex	1.3.6.1.4.1.334.72.1.1.13.26.1.1	INTEGER	read-only	A unique index entry for each Web Retriever process.
STR lnWebProcNumber	1.3.6.1.4.1.334.72.1.1.13.26.1.2	DisplayString	read-only	The number associated with the Web Retriever process in the Notes stats structure.
INT lnWebProcAccFtp	1.3.6.1.4.1.334.72.1.1.13.26.1.3	INTEGER	read-only	The number of FTP connections this Web Retriever process is handling.
INT lnWebProcAccGopher	1.3.6.1.4.1.334.72.1.1.13.26.1.4	INTEGER	read-only	The number of Gopher connections this Web Retriever process is handling.
INT lnWebProcAccHttp	1.3.6.1.4.1.334.72.1.1.13.26.1.5	INTEGER	read-only	The number of HTTP connections this Web Retriever process is handling.
INT lnWebProcKBytesRec	1.3.6.1.4.1.334.72.1.1.13.26.1.6	INTEGER	read-only	The total number of kilobytes this Web Retriever process has received.
INT lnWebProcKBytesSent	1.3.6.1.4.1.334.72.1.1.13.26.1.7	INTEGER	read-only	The total number of kilobytes this Web Retriever process has sent.
INT lnWebProcCacheHits	1.3.6.1.4.1.334.72.1.1.13.26.1.8	INTEGER	read-only	The total number of successful image cache hits for this Web Retriever.
INT lnWebProcCacheMisses	1.3.6.1.4.1.334.72.1.1.13.26.1.9	INTEGER	read-only	The total number of image cache misses for this Web Retriever.
INT lnWebProcPid	1.3.6.1.4.1.334.72.1.1.13.26.1.10	INTEGER	read-only	The process ID associated with this Web Retriever process.
INT lnWebProcUrlFail	1.3.6.1.4.1.334.72.1.1.13.26.1.11	INTEGER	read-only	The number of URL opens that failed for this Web Retriever process.
INT lnWebProcUrlReq	1.3.6.1.4.1.334.72.1.1.13.26.1.12	INTEGER	read-only	The number of URL open requests this Web Retriever process handled.
INT lnWebProcUrlSucc	1.3.6.1.4.1.334.72.1.1.13.26.1.13	INTEGER	read-only	The number of successful URL opens this Web Retriever process handled.
INT lnWebProcVpoolCurBuf	1.3.6.1.4.1.334.72.1.1.13.26.1.14	INTEGER	read-only	The number of buffer VPOOLs currently allocated for this Web Retriever process.
INT lnWebProcVpoolCurElement	1.3.6.1.4.1.334.72.1.1.13.26.1.15	INTEGER	read-only	The number of element VPOOLs currently allocated for this Web Retriever process.
INT lnWebProcVpoolCurMarker	1.3.6.1.4.1.334.72.1.1.13.26.1.16	INTEGER	read-only	The number of marker VPOOLs currently allocated for this Web Retriever process.
INT lnWebProcVpoolCurText	1.3.6.1.4.1.334.72.1.1.13.26.1.17	INTEGER	read-only	The number of text VPOOLs currently allocated for this Web Retriever process.
INT lnWebProcVpoolCurUrl	1.3.6.1.4.1.334.72.1.1.13.26.1.18	INTEGER	read-only	The number of URL VPOOLs currently allocated for this Web Retriever process.
INT lnWebProcVpoolMaxBuf	1.3.6.1.4.1.334.72.1.1.13.26.1.19	INTEGER	read-only	The number of buffer VPOOLs allocated for this Web Retriever process that have reached their maximum size.
INT lnWebProcVpoolMaxElement	1.3.6.1.4.1.334.72.1.1.13.26.1.20	INTEGER	read-only	The number of element VPOOLs allocated to this Web Retriever process that have reached their maximum size.
INT lnWebProcVpoolMaxMarker	1.3.6.1.4.1.334.72.1.1.13.26.1.21	INTEGER	read-only	The number of VPOOLs allocated to this Web Retriever process that have reached their maximum size.
INT lnWebProcVpoolMaxText	1.3.6.1.4.1.334.72.1.1.13.26.1.22	INTEGER	read-only	The number of text VPOOLs allocated to this Web Retriever process that have reached their maximum size.
INT lnWebProcVpoolMaxUrl	1.3.6.1.4.1.334.72.1.1.13.26.1.23	INTEGER	read-only	The number of URL VPOOLs allocated to this Web Retriever process that have reached their maximum size.
lnObject	1.3.6.1.4.1.334.72.1.1.14
STR lnObjectFileName	1.3.6.1.4.1.334.72.1.1.14.1	DisplayString	read-only	The name of the primary single-copy object store (SCOS) database currently in use.
lnObjectTable	1.3.6.1.4.1.334.72.1.1.14.2		not-accessible	This table describes statistics for the single-copy object store of each SCOS database that is currently being accessed.
lnObjectEntry	1.3.6.1.4.1.334.72.1.1.14.2.1		not-accessible	All items in LnObjectTable.
INT lnObjectIndex	1.3.6.1.4.1.334.72.1.1.14.2.1.1	INTEGER	read-only	An internal index for each SCOS database in use.
STR lnObjectName	1.3.6.1.4.1.334.72.1.1.14.2.1.2	DisplayString	read-only	The name of the single copy object store database.
INT lnObjectSharedBy01	1.3.6.1.4.1.334.72.1.1.14.2.1.3	INTEGER	read-only	Messages with 1 pointer.
INT lnObjectSharedBy02	1.3.6.1.4.1.334.72.1.1.14.2.1.4	INTEGER	read-only	Messages with 2 pointers.
INT lnObjectSharedBy03	1.3.6.1.4.1.334.72.1.1.14.2.1.5	INTEGER	read-only	Messages with 3 pointers.
INT lnObjectSharedBy04	1.3.6.1.4.1.334.72.1.1.14.2.1.6	INTEGER	read-only	Messages with 4 pointers.
INT lnObjectSharedBy05	1.3.6.1.4.1.334.72.1.1.14.2.1.7	INTEGER	read-only	Messages with 5 pointers.
INT lnObjectSharedBy06	1.3.6.1.4.1.334.72.1.1.14.2.1.8	INTEGER	read-only	Messages with 6 pointers.
INT lnObjectSharedBy07	1.3.6.1.4.1.334.72.1.1.14.2.1.9	INTEGER	read-only	Messages with 7 pointers.
INT lnObjectSharedBy08	1.3.6.1.4.1.334.72.1.1.14.2.1.10	INTEGER	read-only	Messages with 8 pointers.
INT lnObjectSharedBy09	1.3.6.1.4.1.334.72.1.1.14.2.1.11	INTEGER	read-only	Messages with 9 pointers.
INT lnObjectSharedBy10	1.3.6.1.4.1.334.72.1.1.14.2.1.12	INTEGER	read-only	Messages with 10 pointers.
INT lnObjectSharedBy11	1.3.6.1.4.1.334.72.1.1.14.2.1.13	INTEGER	read-only	Messages with 11 pointers.
INT lnObjectSharedBy12	1.3.6.1.4.1.334.72.1.1.14.2.1.14	INTEGER	read-only	Messages with 12 pointers.
INT lnObjectSharedBy13	1.3.6.1.4.1.334.72.1.1.14.2.1.15	INTEGER	read-only	Messages with 13 pointers.
INT lnObjectSharedBy14	1.3.6.1.4.1.334.72.1.1.14.2.1.16	INTEGER	read-only	Messages with 14 pointers.
INT lnObjectSharedBy15	1.3.6.1.4.1.334.72.1.1.14.2.1.17	INTEGER	read-only	Messages with 15 pointers.
INT lnObjectSharedBy16	1.3.6.1.4.1.334.72.1.1.14.2.1.18	INTEGER	read-only	Messages with 16 pointers.
INT lnObjectSharedBy17	1.3.6.1.4.1.334.72.1.1.14.2.1.19	INTEGER	read-only	Messages with 17 pointers.
INT lnObjectSharedBy18	1.3.6.1.4.1.334.72.1.1.14.2.1.20	INTEGER	read-only	Messages with 18 pointers.
INT lnObjectSharedBy19	1.3.6.1.4.1.334.72.1.1.14.2.1.21	INTEGER	read-only	Messages with 19 pointers.
INT lnObjectSharedBy20	1.3.6.1.4.1.334.72.1.1.14.2.1.22	INTEGER	read-only	Messages with 20 pointers.
INT lnObjectSharedByGreater	1.3.6.1.4.1.334.72.1.1.14.2.1.23	INTEGER	read-only	Messages with more than 20 pointers.
INT lnObjectSharedByTotal	1.3.6.1.4.1.334.72.1.1.14.2.1.24	INTEGER	read-only	The total number of shared messages.
lnDomino	1.3.6.1.4.1.334.72.1.1.15
lnDominoInfo	1.3.6.1.4.1.334.72.1.1.15.1
STR lnDominoBuildName	1.3.6.1.4.1.334.72.1.1.15.1.1	DisplayString	read-only	The name given to the build.
STR lnDominoBuildNumber	1.3.6.1.4.1.334.72.1.1.15.1.2	DisplayString	read-only	The build number given to the build.
STR lnDominoBuildPlatform	1.3.6.1.4.1.334.72.1.1.15.1.3	DisplayString	read-only	The platform this build was created on.
STR lnDominoBuildVersion	1.3.6.1.4.1.334.72.1.1.15.1.4	DisplayString	read-only	The version string associated with this build.
INT lnDominoThreadsActivePeak	1.3.6.1.4.1.334.72.1.1.15.1.5	INTEGER	read-only	The peak number of active threads since the Domino server was started.
INT lnDominoThreadsTotal	1.3.6.1.4.1.334.72.1.1.15.1.6	INTEGER	read-only	The total number of available threads to service Domino requests.
INT lnDominoThreadsPeakTotal	1.3.6.1.4.1.334.72.1.1.15.1.7	INTEGER	read-only	The total peak number of active threads since the Domino server was started.
INT lnDominoThreadsPeakTime	1.3.6.1.4.1.334.72.1.1.15.1.8	INTEGER	read-only	The time when the peak number of threads to service Domino requests occured, represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch).
INT lnDominoStartTime	1.3.6.1.4.1.334.72.1.1.15.1.9	INTEGER	read-only	The time and date the Domino server was started, represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch).
INT lnDominoReqPerMinTotal	1.3.6.1.4.1.334.72.1.1.15.1.10	INTEGER	read-only	The total number of Domino requests in the last minute. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnDominoReqPerMinPeak	1.3.6.1.4.1.334.72.1.1.15.1.11	INTEGER	read-only	The highest number of Domino requests to occur during a one minute interval.
INT lnDominoReqPerMinPeakTime	1.3.6.1.4.1.334.72.1.1.15.1.12	INTEGER	read-only	The time that the peak number of Domino requests occured during a one minute interval, represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch).
INT lnDominoReqPer5MinsTotal	1.3.6.1.4.1.334.72.1.1.15.1.13	INTEGER	read-only	The total number of Domino requests in the last five minutes. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnDominoReqPer5MinsPeak	1.3.6.1.4.1.334.72.1.1.15.1.14	INTEGER	read-only	The highest number of Domino requests to occur during a five minute interval.
INT lnDominoReqPer5MinsPeakTime	1.3.6.1.4.1.334.72.1.1.15.1.15	INTEGER	read-only	The time that the peak number of Domino requets occured during a five minute interval, represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch).
INT lnDominoReqPerHourTotal	1.3.6.1.4.1.334.72.1.1.15.1.16	INTEGER	read-only	The total number of Domino requetss in the last hour. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnDominoReqPerHourPeak	1.3.6.1.4.1.334.72.1.1.15.1.17	INTEGER	read-only	The highest number of Domino requests to occur during a 1 hour interval.
INT lnDominoReqPerHourPeakTime	1.3.6.1.4.1.334.72.1.1.15.1.18	INTEGER	read-only	The time that the peak number of Domino requests occured during a one hour interval, represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch).
INT lnDominoReqPerDayTotal	1.3.6.1.4.1.334.72.1.1.15.1.19	INTEGER	read-only	The total number of Domino requestes in the last day. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnDominoReqPerDayPeak	1.3.6.1.4.1.334.72.1.1.15.1.20	INTEGER	read-only	The highest number of Domino requests to occur during a one day interval.
INT lnDominoReqPerDayPeakTime	1.3.6.1.4.1.334.72.1.1.15.1.21	INTEGER	read-only	The time that the peak number of Domino requests occured during a one day interval, represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch).
INT lnDominoRequestsTotal	1.3.6.1.4.1.334.72.1.1.15.1.22	INTEGER	read-only	The total number of Domino requests since the Domino server was started. A value of zero may indicate the statistic's value is too large to be passed via SNMP.
INT lnDominoCacheCommandDisplaceRate	1.3.6.1.4.1.334.72.1.1.15.1.23	INTEGER	read-only	Command cache displace rate.
INT lnDominoCacheCommandHitRate	1.3.6.1.4.1.334.72.1.1.15.1.24	INTEGER	read-only	Domino command cache hit rate.
INT lnDominoCacheDatabaseDisplaceRate	1.3.6.1.4.1.334.72.1.1.15.1.25	INTEGER	read-only	Domino database cache displace rate.
INT lnDominoCacheDatabaseHitRate	1.3.6.1.4.1.334.72.1.1.15.1.26	INTEGER	read-only	Domino database cache hit rate.
lnDominoCmdInfo	1.3.6.1.4.1.334.72.1.1.15.2
INT lnDominoCmdInfoEditDocument	1.3.6.1.4.1.334.72.1.1.15.2.1	INTEGER	read-only	The number of EditDocument commands requested since the Domino server was started.
INT lnDominoCmdInfoOpenServer	1.3.6.1.4.1.334.72.1.1.15.2.2	INTEGER	read-only	The number of OpenServer commands requested since the Domino server was started.
INT lnDominoCmdInfoOpenDatabase	1.3.6.1.4.1.334.72.1.1.15.2.3	INTEGER	read-only	The number of OpenDatabase commands requested since the Domino server was started.
INT lnDominoCmdInfoOpenView	1.3.6.1.4.1.334.72.1.1.15.2.4	INTEGER	read-only	The number of OpenView commands requested since the Domino server was started.
INT lnDominoCmdInfoOpenDocument	1.3.6.1.4.1.334.72.1.1.15.2.5	INTEGER	read-only	The number of OpenDocument commands requested since the Domino server was started.
INT lnDominoCmdInfoOpenElement	1.3.6.1.4.1.334.72.1.1.15.2.6	INTEGER	read-only	The number of OpenElement commands requested since the Domino server was started.
INT lnDominoCmdInfoOpenIcon	1.3.6.1.4.1.334.72.1.1.15.2.7	INTEGER	read-only	The number of OpenIcon commands requested since the Domino server was started.
INT lnDominoCmdInfoOpenForm	1.3.6.1.4.1.334.72.1.1.15.2.8	INTEGER	read-only	The number of OpenForm commands requested since the Domino server was started.
INT lnDominoCmdInfoOpenAgent	1.3.6.1.4.1.334.72.1.1.15.2.9	INTEGER	read-only	The number of OpenAgent commands requested since the Domino server was started.
INT lnDominoCmdInfoOpenNavigator	1.3.6.1.4.1.334.72.1.1.15.2.10	INTEGER	read-only	The number of OpenNavigator commands requested since the Domino server was started.
INT lnDominoCmdInfoOpenAbout	1.3.6.1.4.1.334.72.1.1.15.2.11	INTEGER	read-only	The number of OpenAbout commands requested since the Domino server was started.
INT lnDominoCmdInfoOpenHelp	1.3.6.1.4.1.334.72.1.1.15.2.12	INTEGER	read-only	The number of OpenHelp commands requested since the Domino server was started.
INT lnDominoCmdInfoCreateDocument	1.3.6.1.4.1.334.72.1.1.15.2.13	INTEGER	read-only	The number of CreateDocument commands requested since the Domino server was started.
INT lnDominoCmdInfoSaveDocument	1.3.6.1.4.1.334.72.1.1.15.2.14	INTEGER	read-only	The number of SaveDocument commands requested since the Domino server was started.
INT lnDominoCmdInfoDeleteDocument	1.3.6.1.4.1.334.72.1.1.15.2.15	INTEGER	read-only	The number of DeleteDocument commands requested since the Domino server was started.
INT lnDominoCmdInfoSearchSite	1.3.6.1.4.1.334.72.1.1.15.2.16	INTEGER	read-only	The number of SearchSite commands requested since the Domino server was started.
INT lnDominoCmdInfoSearchView	1.3.6.1.4.1.334.72.1.1.15.2.17	INTEGER	read-only	The number of SearchView commands requested since the Domino server was started.
INT lnDominoCmdInfoUnknown	1.3.6.1.4.1.334.72.1.1.15.2.18	INTEGER	read-only	The number of unrecognized Domino commands.
INT lnDominoCmdInfoLogin	1.3.6.1.4.1.334.72.1.1.15.2.19	INTEGER	read-only	The number of Login commands requested since the Domino server was started.
INT lnDominoCmdInfoNavigate	1.3.6.1.4.1.334.72.1.1.15.2.20	INTEGER	read-only	The number of Navigate commands requested since the Domino server was started.
INT lnDominoCmdInfoReadForm	1.3.6.1.4.1.334.72.1.1.15.2.21	INTEGER	read-only	The number of Read Form commands requested since the Domino server was started.
INT lnDominoCmdInfoTotal	1.3.6.1.4.1.334.72.1.1.15.2.22	INTEGER	read-only	The total number of commands performed since the Domino server was started.
lnDominoConfig	1.3.6.1.4.1.334.72.1.1.15.3
INT lnDominoCfgPortNumber	1.3.6.1.4.1.334.72.1.1.15.3.1	INTEGER	read-only	The TCP/IP port number from the server record.
INT lnDominoCfgPortStatus	1.3.6.1.4.1.334.72.1.1.15.3.2	INTEGER	read-only	The TCP/IP port status (enabled or disabled).
STR lnDominoCfgHostName	1.3.6.1.4.1.334.72.1.1.15.3.3	DisplayString	read-only	The HostName of the Domino server.
INT lnDominoCfgDNSLookup	1.3.6.1.4.1.334.72.1.1.15.3.4	INTEGER	read-only	The status of DNS lookup (enabled or disabled).
STR lnDominoCfgHomeURL	1.3.6.1.4.1.334.72.1.1.15.3.5	DisplayString	read-only	The URL that requests are directed to if only the server name is specified.
STR lnDominoCfgWelcomePage	1.3.6.1.4.1.334.72.1.1.15.3.6	DisplayString	read-only	The page name to direct to if no explicit page name is specified in the URL.
INT lnDominoCfgActiveThreadsMax	1.3.6.1.4.1.334.72.1.1.15.3.7	INTEGER	read-only	The maximum number of active threads servicing HTTP requests.
INT lnDominoCfgActiveThreadsMin	1.3.6.1.4.1.334.72.1.1.15.3.8	INTEGER	read-only	The minimum number of active threads servicing HTTP requests.
INT lnDominoCfgSSLPortNumber	1.3.6.1.4.1.334.72.1.1.15.3.9	INTEGER	read-only	The TCP/IP port number for HTTP requests using SLL.
INT lnDominoCfgSSLStatus	1.3.6.1.4.1.334.72.1.1.15.3.10	INTEGER	read-only	The SSL status (enabled or disabled).
STR lnDominoCfgSSLKeyFile	1.3.6.1.4.1.334.72.1.1.15.3.11	DisplayString	read-only	The file name for SSL keys.
STR lnDominoCfgCacheDirectory	1.3.6.1.4.1.334.72.1.1.15.3.12	DisplayString	read-only	The directory for the Domino cache.
INT lnDominoCfgCacheSizeMax	1.3.6.1.4.1.334.72.1.1.15.3.13	INTEGER	read-only	The maximum size of the Domino cache in MB.
INT lnDominoCfgCacheDelete	1.3.6.1.4.1.334.72.1.1.15.3.14	INTEGER	read-only	Delete Domino cache on shutdown (enabled or disabled).
INT lnDominoCfgGarbageCollectionStatus	1.3.6.1.4.1.334.72.1.1.15.3.15	INTEGER	read-only	Status of garbage collection (enabled or disabled).
INT lnDominoCfgGarbageCollectionInterval	1.3.6.1.4.1.334.72.1.1.15.3.16	INTEGER	read-only	The interval between garbage collections in minutes.
STR lnDominoCfgImageFormat	1.3.6.1.4.1.334.72.1.1.15.3.17	DisplayString	read-only	Graphics conversion image format.
INT lnDominoCfgImageInterlaced	1.3.6.1.4.1.334.72.1.1.15.3.18	INTEGER	read-only	Graphics interlacing (enabled or disabled).
INT lnDominoCfgViewLines	1.3.6.1.4.1.334.72.1.1.15.3.19	INTEGER	read-only	The number of lines per view segment.
STR lnDominoCfgDirectoryHTML	1.3.6.1.4.1.334.72.1.1.15.3.20	DisplayString	read-only	The location of the HTML directory setting.
STR lnDominoCfgDirectoryURLPathCGI	1.3.6.1.4.1.334.72.1.1.15.3.21	DisplayString	read-only	The CGI URL path.
STR lnDominoCfgDirectoryCGI	1.3.6.1.4.1.334.72.1.1.15.3.22	DisplayString	read-only	The location of the CGI directory setting.
STR lnDominoCfgDirectoryURLPathIcons	1.3.6.1.4.1.334.72.1.1.15.3.23	DisplayString	read-only	The Domino icons URL path.
STR lnDominoCfgDirectoryIcons	1.3.6.1.4.1.334.72.1.1.15.3.24	DisplayString	read-only	The location of the Domino icons directory setting.
STR lnDominoCfgLogAccess	1.3.6.1.4.1.334.72.1.1.15.3.25	DisplayString	read-only	The filename for Domino access logs.
STR lnDominoCfgLogError	1.3.6.1.4.1.334.72.1.1.15.3.26	DisplayString	read-only	The filename for Domino error logs.
STR lnDominoCfgLogTimeStamp	1.3.6.1.4.1.334.72.1.1.15.3.27	DisplayString	read-only	The Domino timestamp format.
STR lnDominoCfgLogFilter	1.3.6.1.4.1.334.72.1.1.15.3.28	DisplayString	read-only	The Domino log filter setting.
INT lnDominoCfgTimeoutIdleThread	1.3.6.1.4.1.334.72.1.1.15.3.29	INTEGER	read-only	The interval (in minutes) before idle threads timeout.
INT lnDominoCfgTimeoutInput	1.3.6.1.4.1.334.72.1.1.15.3.30	INTEGER	read-only	The interval (in minutes) before timeout expires while waiting for input.
INT lnDominoCfgTimeoutOutput	1.3.6.1.4.1.334.72.1.1.15.3.31	INTEGER	read-only	The interval (in minutes) before timeout expires while waiting for output.
INT lnDominoCfgTimeoutCGI	1.3.6.1.4.1.334.72.1.1.15.3.32	INTEGER	read-only	The interval (in minutes) before CGI timeout expires while waiting for input.
lnCalendar	1.3.6.1.4.1.334.72.1.1.16
INT lnCalTotalAllApptsResources	1.3.6.1.4.1.334.72.1.1.16.1	INTEGER	read-only	The total number of scheduled appointment and resource reservations.
INT lnCalTotalAllUsersResources	1.3.6.1.4.1.334.72.1.1.16.2	INTEGER	read-only	The total number of resources that have been reserved, plus the number of users with scheduled appointments.
INT lnCalTotalAppointments	1.3.6.1.4.1.334.72.1.1.16.3	INTEGER	read-only	The total number of scheduled appointments.
INT lnCalTotalReservations	1.3.6.1.4.1.334.72.1.1.16.4	INTEGER	read-only	The total number of reservations for resources.
INT lnCalTotalResources	1.3.6.1.4.1.334.72.1.1.16.5	INTEGER	read-only	The total number of resources that have been reserved.
INT lnCalTotalUsers	1.3.6.1.4.1.334.72.1.1.16.6	INTEGER	read-only	The total number of users that have scheduled appointments.
lnCollector	1.3.6.1.4.1.334.72.1.1.17
INT lnCollectorTimeCollected	1.3.6.1.4.1.334.72.1.1.17.1	INTEGER	read-only	Time and date at which the statistics collector task last collected statistics; represented as the number of seconds since midnight 1/1/70 GMT (UNIX epoch).
STR lnCollectorTimeElapsed	1.3.6.1.4.1.334.72.1.1.17.2	DisplayString	read-only	The time that has elapsed since the statistics collector task was started.
STR lnMIBVersion	1.3.6.1.4.1.334.72.1.3	DisplayString	read-only	Domino SNMP support level (MIB Version).
STR lnQSBuildNumber	1.3.6.1.4.1.334.72.1.5	DisplayString	read-only	The build number of the Query/Set Notes add-in task.
lnControl	1.3.6.1.4.1.334.72.2
INT lnNotesServerSetState	1.3.6.1.4.1.334.72.2.1	INTEGER	read-write	Set to 'down' to shut Notes server down, set to 'up' to restart Notes server. Note: access to this feature is controlled through external (non-SNMP) security measures.
INT lnNotesServerState	1.3.6.1.4.1.334.72.2.2	INTEGER	read-only	Equals 'down' if the Notes server is down, equals 'up' if the Notes server is running.
INT lnLastTrapSeq	1.3.6.1.4.1.334.72.2.3	INTEGER	read-only	Sequence number of last trap sent. Same as the index number that trap in the lnRecentTrapsTable.
lnRecentTrapsTable	1.3.6.1.4.1.334.72.2.4		not-accessible	A table containing the last 10 generated traps.
lnRecentTrapsEntry	1.3.6.1.4.1.334.72.2.4.1		not-accessible	The entry type definition for the lnRecentTrapsTable.
INT lnTrapSeq	1.3.6.1.4.1.334.72.2.4.1.1	INTEGER	read-only	A unique value for each trap record in the sequence of entries returned to the lnRecentTrapsTable.
STR lnTrapInfo	1.3.6.1.4.1.334.72.2.4.1.2	DisplayString	read-only	A string containing the information for a trap.
INT lnRemoteReboot	1.3.6.1.4.1.334.72.2.5	INTEGER	read-write	Set to 'yes' to reboot the entire system. This value will be returned as 'yes' if the system is in the process of rebooting but hasn't come down yet
lnServerTbl	1.3.6.1.4.1.334.72.2.6		not-accessible	A table containing the list of Domino Servers that have been partitioned across this machine. This must be configured by the system administrator. This table only reflects the Domino Servers that are listed in the file lnsnmp.ini since there is no way to query a given machine for a list of potentially available servers.
lnServerTblEntry	1.3.6.1.4.1.334.72.2.6.1		not-accessible	The entry type definition for the lnServerTbl.
INT lnServerTblIndex	1.3.6.1.4.1.334.72.2.6.1.1	INTEGER	read-only	The MIB index for this row in the lnServerTbl.
STR lnServerTblName	1.3.6.1.4.1.334.72.2.6.1.2	DisplayString	read-only	The name of the server as it appears in lnsnmp.ini. However, if a server's addin task registers with the Main Proxy Agent, The addin task will update the server's name with the correct name if a match can be found.
INT lnServerTblNotesPartition	1.3.6.1.4.1.334.72.2.6.1.3	INTEGER	read-only	The value that is entered in lnsnmp.ini. This MUST match the environment variable NOTESPARTITION for Domino Servers partitioned on Windows-NT Systems. This has no real meaning for Domino Servers on UNIX platforms.
STR lnServerTblDataDir	1.3.6.1.4.1.334.72.2.6.1.4	DisplayString	read-only	The data directory of the given Domino server as entered in lnsnmp.ini; See lnServerTblDataDirValid for an indication on whether or not this is a valid Domino Server data directory.
INT lnServerTblDataDirValid	1.3.6.1.4.1.334.72.2.6.1.5	INTEGER	read-only	The Main Proxy Agent validates the Domino Server data directory that is entered in lnsnmp.ini. This will be TRUE if this is a valid directory and the file notes.ini exists within that directory. It will be false otherwise.
INT lnServerTblState	1.3.6.1.4.1.334.72.2.6.1.6	INTEGER	read-only	This will indicate the current state of the server. The server will be considered down until at least one of the Domino Management Agent tasks starts and registers with the Main Proxy Agent.
INT lnServerIdentifiedItself	1.3.6.1.4.1.334.72.2.6.1.7	INTEGER	read-only	This will indicate if the server has ever run and identified itself to the Main Proxy Agent at any time during the current lifespan of the Main Proxy Agent. This may be used as an indication that a given Domino server may not be configured correctly in lnsnmp.ini. The server identification occurs when one of the Domino Management Agent addin tasks is started.
INT lnServerTblSetState	1.3.6.1.4.1.334.72.2.6.1.8	INTEGER	read-write	This will indicate the current state of the Domino server and allow remote SNMP control over stopping & starting the Domion server. The server will be considered down until at least one of the Domino management Agent addin tasks starts and registers with the Main Proxy Agent.
INT lnTotalPartitions	1.3.6.1.4.1.334.72.2.7	INTEGER	read-only	If the file lnsnmp.ini exists, this MIB variable will represent the number of 'Server=' entries in that file. If the file lnsnmp.ini does not exist, the value of lnTotalPartitions will equal zero.
STR lnMPAIniFileLocation	1.3.6.1.4.1.334.72.2.8	DisplayString	read-only	The directory that the file lnsnmp.ini was read from. Normally this is either the Windows-NT directory or this will be /opt/lotus for UNIX systems. However, on either platform, if the file is not found, the PATH environment variable will be searched. The first instance of lnsnmp.ini in the PATH will be opened.
lnInterceptor	1.3.6.1.4.1.334.72.3
STR lnEvtServer	1.3.6.1.4.1.334.72.3.1	DisplayString	read-only	Originating server for this event.
INT lnEvtType	1.3.6.1.4.1.334.72.3.2	INTEGER	read-only	Returns a value for the type of this event.
INT lnEvtSeverity	1.3.6.1.4.1.334.72.3.3	INTEGER	read-only	Returns a value for the severity of this event.
INT lnEvtWhen	1.3.6.1.4.1.334.72.3.4	INTEGER	read-only	Returns a value for the date and time of this event.
STR lnEvtData	1.3.6.1.4.1.334.72.3.5	DisplayString	read-only	Information about this event.
INT lnEvtSeq	1.3.6.1.4.1.334.72.3.6	INTEGER	read-only	Sequence number of this event for internal use only. This information is not available in this MIB variable. If you wish to determine the sequence number for the last trap, please see the variable lnControl.lnRecentTrapsTable.lnRecentTrapEntry.lnTrapSeq.
lnUnix	1.3.6.1.4.1.334.72.4
lnAlarm	1.3.6.1.4.1.334.72.4.1
INT lnAlarmServerHandle	1.3.6.1.4.1.334.72.4.1.1	INTEGER	not-accessible	This represents the server for which the alarm will be generated for.
INT lnAlarmTargetHandle	1.3.6.1.4.1.334.72.4.1.2	INTEGER	not-accessible	This represents the entity on the server that caused the alarm to be generated
INT lnAlarmDate	1.3.6.1.4.1.334.72.4.1.3	INTEGER	not-accessible	The date the alarm occured.
INT lnAlarmTime	1.3.6.1.4.1.334.72.4.1.4	INTEGER	not-accessible	The time the alarm occured.
INT lnAlarmSeverity	1.3.6.1.4.1.334.72.4.1.5	INTEGER	not-accessible	The severity of the alarm being generated by the SNMP trap
INT lnAlarmIntArg	1.3.6.1.4.1.334.72.4.1.6	INTEGER	not-accessible	Returns a value for the integer argument associated with the Alarm.
INT lnAlarmLongArg	1.3.6.1.4.1.334.72.4.1.7	INTEGER	not-accessible	The long integer argument associated with the Alarm.
OCT lnAlarmDoubleArg	1.3.6.1.4.1.334.72.4.1.8	OCTET STRING	not-accessible	The string representation of a floating point value.
OCT lnAlarmTextArg1	1.3.6.1.4.1.334.72.4.1.9	OCTET STRING	not-accessible	The first text argument associated with the Alarm.
OCT lnAlarmTextArg2	1.3.6.1.4.1.334.72.4.1.10	OCTET STRING	not-accessible	The second text argument associated with the Alarm.
STR lnAlarmSeverityStr	1.3.6.1.4.1.334.72.4.1.11	DisplayString	not-accessible	A string representation of the alarm severity. This is used in the trap that is sent to the management station to be displayed on the NetView event cards.
STR lnAlarmTypeStr	1.3.6.1.4.1.334.72.4.1.12	DisplayString	not-accessible	A string representation of the alarm's type. This is used in the trap that is sent to the management station to be displayed on the NetView event cards.
STR lnAlarmMessage	1.3.6.1.4.1.334.72.4.1.13	DisplayString	not-accessible	A message indicating why the alarm was raised. This is used in the trap that is sent to the management station to be displayed on the NetView event cards.
STR lnAlarmMessageExt	1.3.6.1.4.1.334.72.4.1.14	DisplayString	not-accessible	A message extension with more detailed information explaining why the alarm was raised. This is used in the trap that is sent to the management station to be displayed on the NetView event cards.
STR lnAlarmServerName	1.3.6.1.4.1.334.72.4.1.15	DisplayString	not-accessible	The server name of the Notes server the alarm was raised against. This is used in the trap that is sent to the management station to be displayed in the NetView event cards.
lnSignal	1.3.6.1.4.1.334.72.4.2
INT lnSignalServerId	1.3.6.1.4.1.334.72.4.2.1	INTEGER	not-accessible	This variable will be embedded in the lnSignalServerConfigChg trap. This is an integer that represents the ServerId of the Notes server that caused the signal to be raised.
INT lnSignalOldServerType	1.3.6.1.4.1.334.72.4.2.2	INTEGER	not-accessible	This variable will be embedded in the lnSignalServerConfigChg trap. This is an the integer value representing the old server class.
INT lnSignalNewServerType	1.3.6.1.4.1.334.72.4.2.3	INTEGER	not-accessible	This variable will be embedded in the lnSignalServerConfigChg trap. This is an integer value representing the new server class.
INT lnSignalWhatHasChanged	1.3.6.1.4.1.334.72.4.2.4	INTEGER	not-accessible	This variable will be embedded in the lnSignalServerConfigChg trap. This is an integer value indicating what has changed on the server.
STR lnSignalServerName	1.3.6.1.4.1.334.72.4.2.5	DisplayString	not-accessible	The server name. This will appear in the information trap displayed in the NetView Event Cards when a specific server has had all its alarms cleared.
mapInfo	1.3.6.1.4.1.334.72.100
STR lnMainProxyAgentVersion	1.3.6.1.4.1.334.72.100.1	DisplayString	read-only	Information relevant to the Lotus Main SNMP Proxy Agent
notesPump	1.3.6.1.4.1.334.73

RFC description

Lotus Notes/Domino enterprise MIB providing statistics for mail, replica, server, communications, disk and memory usage.

Start monitoring Lotus Notes/Domino mail server with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NOTES-MIB

What Is NOTES-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description