NNCEXTE3-MIB :: nncExtE3FarEndInterval15MinFEBEs

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NNCEXTE3-MIB › nncExtE3FarEndInterval15MinFEBEs

nncExtE3FarEndInterval15MinFEBEs

Module: NNCEXTE3-MIB

OID (symbolic): NNCEXTE3-MIB::nncExtE3FarEndInterval15MinFEBEs

OID (numeric): 1.3.6.1.4.1.123.3.40.1.5.1.2

Node type: OBJECT-TYPE

Type: Gauge32

Access: read-only

Description: The counter associated with the number of Far End Block Errors encountered by a E3 interface in one of the previous 15 minute intervals. This is the count of received FEBEs. This counter will not increment while failure defects are present. This counter is valid when an interface is configured for Direct cell mapping. When an interface is configured for PLCP cell mapping, the counter returns the last valid count when the port is in the Direct mode.

What is nncExtE3FarEndInterval15MinFEBEs?

This gauge holds the Far End Block Errors count for one specific past 15-minute interval, indexed by nncExtE3FarEndInterval15MinNumber, reflecting block errors the remote end detected in that interval and valid in Direct cell mapping mode. It lets a manager pull historical far-end error counts interval by interval rather than only the live current value. An admin investigating a reported far-end issue from earlier in the day would look up the matching interval number to retrieve this historical FEBE count.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.123.3.40.1.5.1.2
snmpwalk -v2c -c public <target> NNCEXTE3-MIB::nncExtE3FarEndInterval15MinFEBEs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.123.3.40.1.5.1.2.1
snmpget -v2c -c public <target> NNCEXTE3-MIB::nncExtE3FarEndInterval15MinFEBEs.1

Start monitoring Newbridge Networks E3 transmission equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NNCEXTE3-MIB::nncExtE3FarEndInterval15MinFEBEs OID value, configure state conditions and alerts, and monitor any Newbridge Networks E3 transmission equipment from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.123newbridgeNNCGNI0001-SMI
1.3.6.1.4.1.123.3nncExtensionsNNCGNI0001-SMI
Numeric OIDNameModule
1.3.6.1.4.1.123.3.40nncExtE3NNCEXTE3-MIB
1.3.6.1.4.1.123.3.40.1nncExtE3ObjectsNNCEXTE3-MIB
1.3.6.1.4.1.123.3.40.1.5nncExtE3FarEndInterval15MinTableNNCEXTE3-MIB
1.3.6.1.4.1.123.3.40.1.5.1nncExtE3FarEndInterval15MinEntryNNCEXTE3-MIB
1.3.6.1.4.1.123.3.40.1.5.1.2nncExtE3FarEndInterval15MinFEBEsNNCEXTE3-MIB