NMS-IPAcl

All MIBs › NMS-IPAcl

Last Updated: 2008-11-18

Category: Security

Description: Defines NMS Communications IP access control list rules for permit/deny filtering on interfaces.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NMS-IPAcl?

NMS-IPAcl is a vendor MIB from NMS Communications defining generic managed objects for IP access control lists, used to represent permit/deny packet filtering rules applied to network interfaces. It belongs to the configuration/security-management category of MIBs rather than a performance or hardware-health category, exposing rule definitions that govern which IP traffic is allowed or blocked. Since no concrete sample objects were provided, its practical monitoring value is centered on configuration-state visibility - confirming which ACL rules are active on a device - rather than hardware or software status metrics like uptime, temperature, or CPU load. It likely depends on standard IP-related textual conventions (e.g., InetAddress types) common to IETF-style ACL MIBs. It would typically be deployed on NMS Communications telephony/media gateway or signaling equipment where IP-level traffic filtering needs to be centrally managed and audited. Network engineers evaluating or troubleshooting this functionality can download the NMS-IPAcl file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NMS-IPAcl. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NMS Communications telephony/media gateway equipment

Monitoring Examples

No concrete object or table names were supplied for this module, so a grounded polling scenario cannot be given; in general, an ACL MIB of this kind would let an operator poll rule-entry tables for permit/deny actions, source/destination address ranges, and the interface each rule is bound to, confirming that filtering is enforced as intended.

What Can Be Monitored

ACL rule entries
permit/deny filter actions
interface-to-ACL bindings

Imported Objects

From NMS-SMI

nmslocal

OBJECT-IDENTITY

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT nmsAclTotal	1.3.6.1.4.1.11606.10.2.5.1	INTEGER	read-only	the total num of access-lists
INT nmsIPAcledesany	1.3.6.1.4.1.11606.10.2.5.4.1.26	INTEGER	read-write	destination any flag
IP nmsIPAcledesbeginip	1.3.6.1.4.1.11606.10.2.5.4.1.21	IpAddress	read-write	destination ip address range begin
INT nmsIPAcledesbeginport	1.3.6.1.4.1.11606.10.2.5.4.1.23	INTEGER	read-write	destination port range begin
INT nmsIPAcledescompare	1.3.6.1.4.1.11606.10.2.5.4.1.25	INTEGER	read-write	destination compare flag
INT nmsIPAcledeseid	1.3.6.1.4.1.11606.10.2.5.4.1.16	INTEGER	read-write	destination interface id
IP nmsIPAcledesendip	1.3.6.1.4.1.11606.10.2.5.4.1.22	IpAddress	read-write	destination ip address range end
INT nmsIPAcledesendport	1.3.6.1.4.1.11606.10.2.5.4.1.24	INTEGER	read-write	destination port range end
IP nmsIPAcledesip	1.3.6.1.4.1.11606.10.2.5.4.1.17	IpAddress	read-write	destination ip address
IP nmsIPAcledesmask	1.3.6.1.4.1.11606.10.2.5.4.1.18	IpAddress	read-write	subnet mask of destination ip address
INT nmsIPAcledespflag	1.3.6.1.4.1.11606.10.2.5.4.1.20	INTEGER	read-write	destination port flag
INT nmsIPAcledesport	1.3.6.1.4.1.11606.10.2.5.4.1.19	INTEGER	read-write	destination port num
INT nmsIPAcledonotfragment	1.3.6.1.4.1.11606.10.2.5.4.1.34	INTEGER	read-write	if donotfragment flag is set
INT nmsIPAcleentryId	1.3.6.1.4.1.11606.10.2.5.4.1.2	INTEGER	read-write	Index of the entry
INT nmsIPAcleestablished	1.3.6.1.4.1.11606.10.2.5.4.1.32	INTEGER	read-write	if an established connection
INT nmsIPAcleicmptype	1.3.6.1.4.1.11606.10.2.5.4.1.27	INTEGER	read-write	ICMP type
INT nmsIPAcleigmptype	1.3.6.1.4.1.11606.10.2.5.4.1.28	INTEGER	read-write	IGMP type
INT nmsIPAcleisfragment	1.3.6.1.4.1.11606.10.2.5.4.1.35	INTEGER	read-write	if isfragment flag is set
INT nmsIPAclelog	1.3.6.1.4.1.11606.10.2.5.4.1.33	INTEGER	read-write	logging packet
STR nmsIPAclename	1.3.6.1.4.1.11606.10.2.5.4.1.1	DisplayString	read-only	The name of this IP Acl.
nmsIPAclEntry	1.3.6.1.4.1.11606.10.2.5.2.1		not-accessible	An entry (conceptual row) containing information about an IP Acl on this device.
INT nmsIPAclEntrytotal	1.3.6.1.4.1.11606.10.2.5.2.1.2	INTEGER	read-only	The total number of this IP Acl entries.
INT nmsIPAcleprecedence	1.3.6.1.4.1.11606.10.2.5.4.1.31	INTEGER	read-write	precedence level
INT nmsIPAcleprotocol	1.3.6.1.4.1.11606.10.2.5.4.1.4	INTEGER	read-write	protocol num
ROW nmsIPAclerowstatus	1.3.6.1.4.1.11606.10.2.5.4.1.40	RowStatus	read-write	The table row status
INT nmsIPAclerule	1.3.6.1.4.1.11606.10.2.5.4.1.3	INTEGER	read-write	IP ACL rule
nmsIPAcleRuleEntry	1.3.6.1.4.1.11606.10.2.5.4.1		not-accessible
nmsIPAcleRuleTable	1.3.6.1.4.1.11606.10.2.5.4		not-accessible
INT nmsIPAclesrcany	1.3.6.1.4.1.11606.10.2.5.4.1.15	INTEGER	read-write	source any flag
IP nmsIPAclesrcbeginip	1.3.6.1.4.1.11606.10.2.5.4.1.10	IpAddress	read-write	source ip address range begin
INT nmsIPAclesrcbeginport	1.3.6.1.4.1.11606.10.2.5.4.1.12	INTEGER	read-write	source port range begin
INT nmsIPAclesrccompare	1.3.6.1.4.1.11606.10.2.5.4.1.14	INTEGER	read-write	source compare flag
INT nmsIPAclesrceid	1.3.6.1.4.1.11606.10.2.5.4.1.5	INTEGER	read-write	source interface id
IP nmsIPAclesrcendip	1.3.6.1.4.1.11606.10.2.5.4.1.11	IpAddress	read-write	source ip address range end
INT nmsIPAclesrcendport	1.3.6.1.4.1.11606.10.2.5.4.1.13	INTEGER	read-write	source port range end
IP nmsIPAclesrcip	1.3.6.1.4.1.11606.10.2.5.4.1.6	IpAddress	read-write	source ip address
IP nmsIPAclesrcmask	1.3.6.1.4.1.11606.10.2.5.4.1.7	IpAddress	read-write	subnet mask of source ip address
INT nmsIPAclesrcpflag	1.3.6.1.4.1.11606.10.2.5.4.1.9	INTEGER	read-write	source port flag
INT nmsIPAclesrcport	1.3.6.1.4.1.11606.10.2.5.4.1.8	INTEGER	read-write	source port num
STR nmsIPAcletimerange	1.3.6.1.4.1.11606.10.2.5.4.1.29	DisplayString	read-write	Time-range name
INT nmsIPAcletos	1.3.6.1.4.1.11606.10.2.5.4.1.30	INTEGER	read-write	tos level
INT nmsIPAcletotallen	1.3.6.1.4.1.11606.10.2.5.4.1.36	INTEGER	read-write	total length of ip packet
INT nmsIPAcletotallenflag	1.3.6.1.4.1.11606.10.2.5.4.1.37	INTEGER	read-write	flag of total length value
INT nmsIPAclettl	1.3.6.1.4.1.11606.10.2.5.4.1.38	INTEGER	read-write	time to live of ip packet
INT nmsIPAclettlflag	1.3.6.1.4.1.11606.10.2.5.4.1.39	INTEGER	read-write	flag of time to live value
INT nmsIPAclMergeEnable	1.3.6.1.4.1.11606.10.2.5.2.1.4	INTEGER	read-write	if merge enable
nmsIPAclMIB	1.3.6.1.4.1.11606.10.2.5			This MIB module defines the generic managed objects for IP Acl.
STR nmsIPAclname	1.3.6.1.4.1.11606.10.2.5.2.1.1	DisplayString	read-only	The name of this IP Acl.
ROW nmsIPAclRowStatus	1.3.6.1.4.1.11606.10.2.5.2.1.5	RowStatus	read-write	table row status
INT nmsIPAclsany	1.3.6.1.4.1.11606.10.2.5.3.1.9	INTEGER	read-write	any flag
INT nmsIPAclscompare	1.3.6.1.4.1.11606.10.2.5.3.1.8	INTEGER	read-write	compare flag
INT nmsIPAclsentryId	1.3.6.1.4.1.11606.10.2.5.3.1.2	INTEGER	read-write	Index of the entry
INT nmsIPAclslog	1.3.6.1.4.1.11606.10.2.5.3.1.10	INTEGER	read-write	logging packet
STR nmsIPAclsname	1.3.6.1.4.1.11606.10.2.5.3.1.1	DisplayString	read-only	The name of this IP Acl.
ROW nmsIPAclsrowstatus	1.3.6.1.4.1.11606.10.2.5.3.1.11	RowStatus	read-write	table row status
INT nmsIPAclsrule	1.3.6.1.4.1.11606.10.2.5.3.1.3	INTEGER	read-write	IP ACL rule
nmsIPAclsRuleEntry	1.3.6.1.4.1.11606.10.2.5.3.1		not-accessible
nmsIPAclsRuleTable	1.3.6.1.4.1.11606.10.2.5.3		not-accessible
IP nmsIPAclssrcbeginip	1.3.6.1.4.1.11606.10.2.5.3.1.6	IpAddress	read-write	destination ip address
IP nmsIPAclssrcendip	1.3.6.1.4.1.11606.10.2.5.3.1.7	IpAddress	read-write	subnet mask of destination ip address
IP nmsIPAclssrcip	1.3.6.1.4.1.11606.10.2.5.3.1.4	IpAddress	read-write	source ip address
IP nmsIPAclssrcmask	1.3.6.1.4.1.11606.10.2.5.3.1.5	IpAddress	read-write	subnet mask of source ip address
nmsIPAclTable	1.3.6.1.4.1.11606.10.2.5.2		not-accessible	This table containing one entry for each IP Acl on this device.
INT nmsIPAclType	1.3.6.1.4.1.11606.10.2.5.2.1.3	INTEGER	read-write	The type of this IP Acl.

RFC description

Generic IP Access Control List (ACL) MIB defining policy rule management for network filtering.

Start monitoring NMS Communications telephony/media gateway equipment (IP ACL) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NMS-IPAcl

What Is NMS-IPAcl?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description