NETGEAR-ROUTE-POLICY-MIB :: fastpathRoutePolicyStmtMatchPacketLengthRangeMax

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › NETGEAR-ROUTE-POLICY-MIB › fastpathRoutePolicyStmtMatchPacketLengthRangeMax

fastpathRoutePolicyStmtMatchPacketLengthRangeMax

Module: NETGEAR-ROUTE-POLICY-MIB

OID (symbolic): NETGEAR-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchPacketLengthRangeMax

OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.9

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Maximum value in the packet length range in a match length term. A value of zero is used to disable/remove maximum length configuration.

What is fastpathRoutePolicyStmtMatchPacketLengthRangeMax?

This value is the maximum packet length used in a match-length term of a route-map statement, where a value of zero disables or removes the maximum-length condition. Admins set it together with the minimum to define a packet-size range the statement matches against. Setting fastpathRoutePolicyStmtMatchPacketLengthRangeMax to 1500 caps this statement's match range at standard Ethernet MTU-sized packets.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.9
snmpwalk -v2c -c public <target> NETGEAR-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchPacketLengthRangeMax

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.9.1
snmpget -v2c -c public <target> NETGEAR-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchPacketLengthRangeMax.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.9.1 i <value>

Start monitoring Netgear Layer 3 managed switch/router (FASTPATH-based, route policy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchPacketLengthRangeMax OID value, configure state conditions and alerts, and monitor any Netgear Layer 3 managed switch/router (FASTPATH-based, route policy) from a single console.

OID Breakdown

Upper-level ancestors (17 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.10895dellLanDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000dellLanStandardDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2dellLanExtensionDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2.6132lvl7BROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1lvl7ProductsBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1fastPathBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2fastPathRoutingDNOS-ROUTING-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20fastPathRoutePolicyDNOS-ROUTE-POLICY-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2fastpathRoutePolicyStamentTableDNOS-ROUTE-POLICY-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1fastpathRoutePolicyStatementEntryDNOS-ROUTE-POLICY-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.9fastpathRoutePolicyStmtMatchPacketLengthRangeMaxNETGEAR-ROUTE-POLICY-MIB