NETGEAR-ROUTE-POLICY-MIB :: fastpathRoutePolicyStmtMatchIpv4AclList

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › NETGEAR-ROUTE-POLICY-MIB › fastpathRoutePolicyStmtMatchIpv4AclList

fastpathRoutePolicyStmtMatchIpv4AclList

Module: NETGEAR-ROUTE-POLICY-MIB

OID (symbolic): NETGEAR-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchIpv4AclList

OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.4

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: The string containing a list of IPv4 ACLs. This list contains either IPV4 standard ACL/IPV4 extended ACL/ named IPv4 ACL. In a single match statement, up to a maximum of 16 IPV4 ACLs can be included.

What is fastpathRoutePolicyStmtMatchIpv4AclList?

This string holds a list of up to 16 IPv4 ACLs (standard, extended, or named) used as match criteria in a route-map statement. Admins configure it to specify which IPv4 traffic, as defined by the referenced ACLs, this route-map statement applies to. Setting this list to reference an ACL matching traffic from a specific subnet makes the route-map statement apply only to packets from that subnet.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.4
snmpwalk -v2c -c public <target> NETGEAR-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchIpv4AclList

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.4.1
snmpget -v2c -c public <target> NETGEAR-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchIpv4AclList.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.4.1 s <value>

Start monitoring Netgear Layer 3 managed switch/router (FASTPATH-based, route policy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchIpv4AclList OID value, configure state conditions and alerts, and monitor any Netgear Layer 3 managed switch/router (FASTPATH-based, route policy) from a single console.

OID Breakdown

Upper-level ancestors (17 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.674dellArrayManager-MIB
1.3.6.1.4.1.674.10895dellLanDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000dellLanStandardDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2dellLanExtensionDell-Vendor-MIB
1.3.6.1.4.1.674.10895.5000.2.6132lvl7BROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1lvl7ProductsBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1fastPathBROADCOM-REF-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2fastPathRoutingDNOS-ROUTING-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20fastPathRoutePolicyDNOS-ROUTE-POLICY-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2fastpathRoutePolicyStamentTableDNOS-ROUTE-POLICY-MIB
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1fastpathRoutePolicyStatementEntryDNOS-ROUTE-POLICY-MIB
Numeric OIDNameModule
1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.4fastpathRoutePolicyStmtMatchIpv4AclListNETGEAR-ROUTE-POLICY-MIB