All MIBs › NETGEAR-ROUTE-POLICY-MIB › fastpathRoutePolicyStmtMatchIpv4AclDelList
fastpathRoutePolicyStmtMatchIpv4AclDelList
Module: NETGEAR-ROUTE-POLICY-MIB
OID (symbolic): NETGEAR-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchIpv4AclDelList
OID (numeric): 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.5
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: The string containing a list of IPv4 ACLs. This list contains either IPV4 standard ACL/IPV4 extended ACL/ named IPv4 ACL. In a single match statement, up to a maximum of 16 IPV4 ACLs can be included.This list is used to delete already configured match list of IPv4 ACLs in route-map statement.Earlier this list should have configured through MIB object fastpathRoutePolicyStmtMatchIpv4AclList
What is fastpathRoutePolicyStmtMatchIpv4AclDelList?
This string holds a list of IPv4 ACLs to remove from the match criteria previously configured via fastpathRoutePolicyStmtMatchIpv4AclList. Admins use it specifically to delete entries from an existing match list without having to redefine the whole list. Writing an ACL name into fastpathRoutePolicyStmtMatchIpv4AclDelList removes just that ACL from the route-map statement's IPv4 match conditions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.5 snmpwalk -v2c -c public <target> NETGEAR-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchIpv4AclDelList
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.5.1 snmpget -v2c -c public <target> NETGEAR-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchIpv4AclDelList.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.5.1 s <value>
Start monitoring Netgear Layer 3 managed switch/router (FASTPATH-based, route policy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-ROUTE-POLICY-MIB::fastpathRoutePolicyStmtMatchIpv4AclDelList OID value, configure state conditions and alerts, and monitor any Netgear Layer 3 managed switch/router (FASTPATH-based, route policy) from a single console.
OID Breakdown
Upper-level ancestors (17 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.674 | dell | ArrayManager-MIB |
| 1.3.6.1.4.1.674.10895 | dellLan | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000 | dellLanStandard | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.2 | dellLanExtension | Dell-Vendor-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132 | lvl7 | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1 | lvl7Products | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1 | fastPath | BROADCOM-REF-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2 | fastPathRouting | DNOS-ROUTING-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20 | fastPathRoutePolicy | DNOS-ROUTE-POLICY-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2 | fastpathRoutePolicyStamentTable | DNOS-ROUTE-POLICY-MIB |
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1 | fastpathRoutePolicyStatementEntry | DNOS-ROUTE-POLICY-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.5 | fastpathRoutePolicyStmtMatchIpv4AclDelList | NETGEAR-ROUTE-POLICY-MIB |