NETEXEC-MIB :: dsucsuDiagFrmLclPayload

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NETEXEC-MIB › dsucsuDiagFrmLclPayload

dsucsuDiagFrmLclPayload

Module: NETEXEC-MIB

OID (symbolic): NETEXEC-MIB::dsucsuDiagFrmLclPayload

OID (numeric): 1.3.6.1.4.1.466.6.1.17.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This selection displays the status or controls the Channel Remote Loopback for the selected channel. This loopback transmits a code to the remote node which will enable or disable a diagnostic loopback at the addressed channel. This selection is applicable only for DSX type channels.

What is dsucsuDiagFrmLclPayload?

The source DESCRIPTION for this object actually describes a channel remote loopback (a code sent to the far end) applicable only to DSX-type channels - text that also appears, seemingly swapped, under dsucsuDiagFrmRemLpbk below. Given its enable/disable/notApplicable syntax and position among the 'local' loopback controls, it most plausibly is meant to control a local payload loopback isolating payload data from framing on DSX-type channels; the vendor's stated 'remote loopback' wording here should be treated with caution.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.6.1.17.1.5
snmpwalk -v2c -c public <target> NETEXEC-MIB::dsucsuDiagFrmLclPayload

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.466.6.1.17.1.5.1
snmpget -v2c -c public <target> NETEXEC-MIB::dsucsuDiagFrmLclPayload.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.466.6.1.17.1.5.1 i <value>

Start monitoring DSU/CSU network element / digital access cross-connect system (DACS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETEXEC-MIB::dsucsuDiagFrmLclPayload OID value, configure state conditions and alerts, and monitor any DSU/CSU network element / digital access cross-connect system (DACS) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.466tylinkNETEXEC-MIB
1.3.6.1.4.1.466.6netexecNETEXEC-MIB
1.3.6.1.4.1.466.6.1dsucsuNETEXEC-MIB
1.3.6.1.4.1.466.6.1.17dsucsuDiagFrmTableNETEXEC-MIB
1.3.6.1.4.1.466.6.1.17.1dsucsuDiagFrmEntryNETEXEC-MIB
1.3.6.1.4.1.466.6.1.17.1.5dsucsuDiagFrmLclPayloadNETEXEC-MIB