All MIBs › NETEXEC-MIB › dsucsuConnAutoStartDS0
dsucsuConnAutoStartDS0
Module: NETEXEC-MIB
OID (symbolic): NETEXEC-MIB::dsucsuConnAutoStartDS0
OID (numeric): 1.3.6.1.4.1.466.6.1.14.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Port1/2 includes 24 DS0's. This value is the starting DS0 used by the node to allocate DS0s to meet port(3-4)-dte requirements. Sequential, contiguous DS0s are assigned. The number of DS0s required is based upon the DTE Data Rate and DTE Channel Mapping. The node's response to an entry may be gathered by querying dsucsuConnAutoStatus. To assign DS0s in a non-contiguous format, use the CfgEditConnTable.
What is dsucsuConnAutoStartDS0?
Sets the DS0 (1-24) at which the node should begin automatically assigning contiguous T1 bandwidth to the selected DTE port, sized by the port's configured data rate; special codes flag no current connection or a non-contiguous DS0 set. A set here only takes effect after dsucsuConnAutoUpdateCmd is issued.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.466.6.1.14.1.1.4 snmpwalk -v2c -c public <target> NETEXEC-MIB::dsucsuConnAutoStartDS0
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.466.6.1.14.1.1.4.1 snmpget -v2c -c public <target> NETEXEC-MIB::dsucsuConnAutoStartDS0.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.466.6.1.14.1.1.4.1 i <value>
Start monitoring DSU/CSU network element / digital access cross-connect system (DACS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETEXEC-MIB::dsucsuConnAutoStartDS0 OID value, configure state conditions and alerts, and monitor any DSU/CSU network element / digital access cross-connect system (DACS) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.466 | tylink | NETEXEC-MIB |
| 1.3.6.1.4.1.466.6 | netexec | NETEXEC-MIB |
| 1.3.6.1.4.1.466.6.1 | dsucsu | NETEXEC-MIB |
| 1.3.6.1.4.1.466.6.1.14 | dsucsuCfgDacsTable | NETEXEC-MIB |
| 1.3.6.1.4.1.466.6.1.14.1 | dsucsuCfgAutoAssignTable | NETEXEC-MIB |
| 1.3.6.1.4.1.466.6.1.14.1.1 | dsucsuCfgAutoAssignEntry | NETEXEC-MIB |
| 1.3.6.1.4.1.466.6.1.14.1.1.4 | dsucsuConnAutoStartDS0 | NETEXEC-MIB |