NETBOTZ-DEVICE-MIB

All MIBs › NETBOTZ-DEVICE-MIB

Category: Environmental Monitoring

Description: Monitors environmental sensor values including temperature, humidity, and airflow for NetBotz monitoring devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NETBOTZ-DEVICE-MIB?

NETBOTZ-DEVICE-MIB is a vendor MIB for NetBotz (now part of APC/Schneider Electric) environmental monitoring appliances, covering the device's own network and notification configuration such as hostname, domain, IP/netmask/gateway, DNS servers, SMTP/POP mail server and ports, and logging level. Rather than exposing sensor readings directly, this particular module focuses on the appliance's management-plane setup needed to deliver environmental alerts (e.g., email notifications) reliably. Its monitoring relevance is largely indirect: verifying correct netBotz-dev-ip, netBotz-dev-gateway, and netBotz-dev-smtp settings ensures the environmental sensor alerts (temperature, humidity, airflow, etc. exposed elsewhere in the NetBotz MIB family) actually reach administrators. It is closely tied to companion NetBotz MIBs that expose the actual sensor data and alarm objects. It is deployed on NetBotz environmental monitoring appliances placed in data center and equipment room racks. Engineers can download the NETBOTZ-DEVICE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NETBOTZ-DEVICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NetBotz/APC environmental monitoring appliance

Monitoring Examples

An administrator would check netBotz-dev-ip, netBotz-dev-netmask, and netBotz-dev-gateway to confirm the appliance's management network configuration is correct and it remains reachable for polling. Verifying netBotz-dev-smtp and netBotz-dev-smtpport ensures the device can actually send out email alerts when an environmental threshold (managed by a companion NetBotz MIB) is breached. The netBotz-dev-loglevel object would be adjusted to increase logging detail when diagnosing why expected notifications aren't arriving.

What Can Be Monitored

device IP/netmask/gateway configuration
DNS server settings
SMTP/POP mail server configuration
logging level

Imported Objects

From NETBOTZ-MIB

netBotz-device

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT netBotz_24hourpreferred	1.3.6.1.4.1.5528.50.25	INTEGER	read-write	Indicates if 24-hour(1) versus 12-hour(0) time format is preferred.
STR netBotz_alert_url	1.3.6.1.4.1.5528.50.28	DisplayString	read-write	The URL, if defined, to which non-picture alerts are HTTP POSTed
STR netBotz_alert_url_logon	1.3.6.1.4.1.5528.50.31	DisplayString	read-write	The user ID and password, if defined, used for POSTing non-picture alerts. Field is write-only, and formatted /
INT netBotz_default_applet	1.3.6.1.4.1.5528.50.21	INTEGER	read-write	Setting to control if default web page should launch applet by default(1) or the HTML status page(0).
STR netBotz_dev_domain	1.3.6.1.4.1.5528.50.2	DisplayString	read-write	Netbotz device's default DNS domain.
IP netBotz_dev_gateway	1.3.6.1.4.1.5528.50.5	IpAddress	read-write	Netbotz device's default gateway/router. 0.0.0.0 if not defined.
STR netBotz_dev_host	1.3.6.1.4.1.5528.50.1	DisplayString	read-write	Netbotz device's host name.
IP netBotz_dev_ip	1.3.6.1.4.1.5528.50.3	IpAddress	read-write	Netbotz device's IP address.
IP netBotz_dev_logaddress	1.3.6.1.4.1.5528.50.12	IpAddress	read-write	This field contains an IP address to receive log messages from the Netbotz device. 0.0.0.0 for no external logging.
INT netBotz_dev_loglevel	1.3.6.1.4.1.5528.50.11	INTEGER	read-write	This field contains the log level of the Netbotz device. Log messages will be filtered, so that only same or lower-level messages will be passed. The default log level is 5, for warnings and lower levels. The log levels are the following: 1 - emergency 2 - alert 3 - critical 4 - error 5 - warning 6 - notice 7 - info 8 - trace
INT netBotz_dev_logport	1.3.6.1.4.1.5528.50.13	INTEGER	read-write	Port to use in conjunction with the log address, for log messages from the Netbotz device to be sent to an external IP address. 0 = no external logging.
IP netBotz_dev_netmask	1.3.6.1.4.1.5528.50.4	IpAddress	read-write	Netbotz device's netmask.
STR netBotz_dev_pager	1.3.6.1.4.1.5528.50.16	DisplayString	read-write	The pager number for alerts and messages. Currently, not used.
STR netBotz_dev_pop	1.3.6.1.4.1.5528.50.18	DisplayString	read-write	POP server name. Currently, not used.
INT netBotz_dev_popport	1.3.6.1.4.1.5528.50.10	INTEGER	read-write	POP port. Currently, not used.
IP netBotz_dev_primarydns	1.3.6.1.4.1.5528.50.6	IpAddress	read-write	Primary Domain Name Server. 0.0.0.0 if not defined.
STR netBotz_dev_primaryemail	1.3.6.1.4.1.5528.50.14	DisplayString	read-write	The primary email addresses for alerts and messages (list separated by commas for multiple addresses).
INT netBotz_dev_registered	1.3.6.1.4.1.5528.50.20	INTEGER	read-only	Indicates if the device has been registered with Netbotz, Inc. 1=registered, 0=not registered.
IP netBotz_dev_secondarydns	1.3.6.1.4.1.5528.50.7	IpAddress	read-write	Secondary Domain Name Server. 0.0.0.0 if not defined.
STR netBotz_dev_secondaryemail	1.3.6.1.4.1.5528.50.15	DisplayString	read-write	The secondary email address for alerts and messages (list separated by commas for multiple addresses).
STR netBotz_dev_serialno	1.3.6.1.4.1.5528.50.17	DisplayString	read-only	The serial number of the Netbotz device.
STR netBotz_dev_smtp	1.3.6.1.4.1.5528.50.8	DisplayString	read-write	SMTP server address. This is the mail server used for sending alert e-mails.
INT netBotz_dev_smtpport	1.3.6.1.4.1.5528.50.9	INTEGER	read-write	SMTP port. Port number of SMTP server used for sending alert e-mails.
STR netBotz_dev_version	1.3.6.1.4.1.5528.50.19	DisplayString	read-only	The current NetBotz device firmware version.
INT netBotz_guibar_color	1.3.6.1.4.1.5528.50.22	INTEGER	read-write	Setting for color of GUI bar (RGB). Value = 0xRRGGBB.
INT netBotz_ismetric	1.3.6.1.4.1.5528.50.27	INTEGER	read-only	Units are metric (1) or U.S. (0). Applies to temperature and airflow rate.
STR netBotz_locale	1.3.6.1.4.1.5528.50.23	DisplayString	read-write	The locale ID of the NetBotz device. Format is ISO 639 language (lower case), an underscore, and ISO 3166 country (upper case). Some locales are just the ISO 639 language code.
STR netBotz_picture_alert_url	1.3.6.1.4.1.5528.50.29	DisplayString	read-write	The URL, if defined, to which picture alerts are HTTP POSTed, using multipart/form-data encoding.
STR netBotz_picture_alert_url_logon	1.3.6.1.4.1.5528.50.32	DisplayString	read-write	The user ID and password, if defined, used for POSTing picture alerts. Field is write-only, and formatted /
STR netBotz_sensor_data_url	1.3.6.1.4.1.5528.50.30	DisplayString	read-write	The URL, if defined, to which sensor data is periodically HTTP POSTed.
INT netBotz_sensor_data_url_flags	1.3.6.1.4.1.5528.50.35	INTEGER	read-write	Option flags for data POSTs of sensor data. Bit 0=1 if current picture should be included. Bits 1-31 are reserved.
STR netBotz_sensor_data_url_logon	1.3.6.1.4.1.5528.50.33	DisplayString	read-write	The user ID and password, if defined, used for POSTing sensor data. Field is write-only, and formatted /
INT netBotz_sensor_data_url_period	1.3.6.1.4.1.5528.50.34	INTEGER	read-write	Default number of minutes between periodic sensor data HTTP POSTs.
STR netBotz_timezone	1.3.6.1.4.1.5528.50.24	DisplayString	read-write	The timezone ID of the NetBotz device.
INT netBotz_utc_clock	1.3.6.1.4.1.5528.50.26	INTEGER	read-write	Current time of clock on NetBotz device, in UTC seconds (seconds since 1/1/1970 12:00am GMT).

RFC description

Device configuration and network parameters for Netbotz environmental monitoring appliances.

Start monitoring NetBotz/APC environmental monitoring appliance (network/mail configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NETBOTZ-DEVICE-MIB

What Is NETBOTZ-DEVICE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description