All MIBs › NATV2-MIB › natv2SubscriberThresholdPortMapEntriesHigh
natv2SubscriberThresholdPortMapEntriesHigh
Module: NATV2-MIB
OID (symbolic): NATV2-MIB::natv2SubscriberThresholdPortMapEntriesHigh
OID (numeric): 1.3.6.1.2.1.234.1.1.1.16
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Notification threshold for total number of port mappings active for this subscriber. Whenever natv2SubscriberPortMapEntries is updated, if it equals or exceeds natv2SubscriberThresholdPortMapEntriesHigh, the notification natv2NotificationSubscriberPortMappingEntriesHigh is triggered, unless the notification is disabled by setting the threshold to -1. Reporting is subject to the minimum inter-notification interval given by natv2SubscriberNotificationInterval. If multiple notifications are triggered during one interval, the agent MUST report only the one containing the highest value of natv2SubscriberPortMapEntries and discard the others.
What is natv2SubscriberThresholdPortMapEntriesHigh?
A read-write notification threshold: once natv2SubscriberPortMapEntries reaches or exceeds this value, the agent may fire a high-port-usage notification for the subscriber, and an admin sets it to -1 to disable that notification for this subscriber.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.234.1.1.1.16 snmpwalk -v2c -c public <target> NATV2-MIB::natv2SubscriberThresholdPortMapEntriesHigh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.234.1.1.1.16.1 snmpget -v2c -c public <target> NATV2-MIB::natv2SubscriberThresholdPortMapEntriesHigh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.2.1.234.1.1.1.16.1 i <value>
Start monitoring Vendor-neutral IETF standard (carrier-grade NAT router/firewall/gateway) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NATV2-MIB::natv2SubscriberThresholdPortMapEntriesHigh OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (carrier-grade NAT router/firewall/gateway) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.234 | natv2MIB | NATV2-MIB |
| 1.3.6.1.2.1.234.1 | natv2MIBDeviceObjects | NATV2-MIB |
| 1.3.6.1.2.1.234.1.1 | natv2SubscriberTable | NATV2-MIB |
| 1.3.6.1.2.1.234.1.1.1 | natv2SubscriberEntry | NATV2-MIB |
| 1.3.6.1.2.1.234.1.1.1.16 | natv2SubscriberThresholdPortMapEntriesHigh | NATV2-MIB |