NATV2-MIB :: natv2PoolAddressMapFailureDrops

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNATV2-MIBnatv2PoolAddressMapFailureDrops

natv2PoolAddressMapFailureDrops

Module: NATV2-MIB

OID (symbolic): NATV2-MIB::natv2PoolAddressMapFailureDrops

OID (numeric): 1.3.6.1.2.1.234.2.3.1.11

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The cumulative number of packets originated by the subscriber that were dropped because the packet would have triggered the creation of a new address map entry, but no address could be allocated from this address pool because all addresses in the pool have already been fully allocated. Counters of this event are also provided per instance, per protocol, and per subscriber.

This value MUST be monotone increasing in the periods between updates of the entity's natv2PoolDiscontinuityTime. If a manager detects a change in the latter since the last time it sampled this counter, it SHOULD NOT make use of the difference between the latest value of the counter and any value retrieved before the new value of natv2PoolDiscontinuityTime.

What is natv2PoolAddressMapFailureDrops?

A cumulative count of packets dropped because a new address-map entry needed an address from this specific pool but the pool was already fully allocated, letting an admin identify exactly which pool is exhausted rather than just that some pool, somewhere, is.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.234.2.3.1.11
snmpwalk -v2c -c public <target> NATV2-MIB::natv2PoolAddressMapFailureDrops

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.234.2.3.1.11.1
snmpget -v2c -c public <target> NATV2-MIB::natv2PoolAddressMapFailureDrops.1

Start monitoring Vendor-neutral IETF standard (carrier-grade NAT router/firewall/gateway) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NATV2-MIB::natv2PoolAddressMapFailureDrops OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (carrier-grade NAT router/firewall/gateway) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.234natv2MIBNATV2-MIB
1.3.6.1.2.1.234.2natv2MIBInstanceObjectsNATV2-MIB
1.3.6.1.2.1.234.2.3natv2PoolTableNATV2-MIB
1.3.6.1.2.1.234.2.3.1natv2PoolEntryNATV2-MIB
1.3.6.1.2.1.234.2.3.1.11natv2PoolAddressMapFailureDropsNATV2-MIB