NATV2-MIB :: natv2InstanceThresholdAddressMapEntriesHigh

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNATV2-MIBnatv2InstanceThresholdAddressMapEntriesHigh

natv2InstanceThresholdAddressMapEntriesHigh

Module: NATV2-MIB

OID (symbolic): NATV2-MIB::natv2InstanceThresholdAddressMapEntriesHigh

OID (numeric): 1.3.6.1.2.1.234.2.1.1.20

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Notification threshold for total number of address map entries held by this NAT instance. Whenever natv2InstanceAddressMapEntries is updated, if it equals or exceeds natv2InstanceThresholdAddressMapEntriesHigh, then natv2NotificationInstanceAddressMapEntriesHigh may be triggered, unless the notification is disabled by setting the threshold to -1. Reporting is subject to the minimum inter-notification interval given by natv2InstanceNotificationInterval. If multiple notifications are triggered during one interval, the agent MUST report only the one containing the highest value of natv2InstanceAddressMapEntries and discard the others.

What is natv2InstanceThresholdAddressMapEntriesHigh?

A read-write notification threshold: once natv2InstanceAddressMapEntries reaches or exceeds this value, the agent may fire a high-usage notification for the instance's address-map table, disabled by setting it to -1.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.234.2.1.1.20
snmpwalk -v2c -c public <target> NATV2-MIB::natv2InstanceThresholdAddressMapEntriesHigh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.234.2.1.1.20.1
snmpget -v2c -c public <target> NATV2-MIB::natv2InstanceThresholdAddressMapEntriesHigh.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.2.1.234.2.1.1.20.1 i <value>

Start monitoring Vendor-neutral IETF standard (carrier-grade NAT router/firewall/gateway) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NATV2-MIB::natv2InstanceThresholdAddressMapEntriesHigh OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (carrier-grade NAT router/firewall/gateway) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.234natv2MIBNATV2-MIB
1.3.6.1.2.1.234.2natv2MIBInstanceObjectsNATV2-MIB
1.3.6.1.2.1.234.2.1natv2InstanceTableNATV2-MIB
1.3.6.1.2.1.234.2.1.1natv2InstanceEntryNATV2-MIB
1.3.6.1.2.1.234.2.1.1.20natv2InstanceThresholdAddressMapEntriesHighNATV2-MIB