NATV2-MIB :: natv2InstanceAddressMapFailureDrops

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNATV2-MIBnatv2InstanceAddressMapFailureDrops

natv2InstanceAddressMapFailureDrops

Module: NATV2-MIB

OID (symbolic): NATV2-MIB::natv2InstanceAddressMapFailureDrops

OID (numeric): 1.3.6.1.2.1.234.2.1.1.15

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The cumulative number of packets dropped because the packet would have triggered the creation of a new address map entry, but no address could be allocated in the selected external realm because all addresses from the selected address pool (or the whole realm, if no address pool has been configured for that realm) have already been fully allocated.

This value MUST be monotone increasing in the periods between updates of the entity's natv2InstanceDiscontinuityTime. If a manager detects a change in the latter since the last time it sampled this

counter, it SHOULD NOT make use of the difference between the latest value of the counter and any value retrieved before the new value of natv2InstanceDiscontinuityTime.

What is natv2InstanceAddressMapFailureDrops?

A cumulative count of packets dropped instance-wide because a new address-map entry was needed but no external address remained in the relevant pool or realm, the instance-wide rollup of the same failure natv2SubscriberAddressMapFailureDrops tracks per subscriber.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.2.1.234.2.1.1.15
snmpwalk -v2c -c public <target> NATV2-MIB::natv2InstanceAddressMapFailureDrops

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.2.1.234.2.1.1.15.1
snmpget -v2c -c public <target> NATV2-MIB::natv2InstanceAddressMapFailureDrops.1

Start monitoring Vendor-neutral IETF standard (carrier-grade NAT router/firewall/gateway) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NATV2-MIB::natv2InstanceAddressMapFailureDrops OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (carrier-grade NAT router/firewall/gateway) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.2mgmtAXON-MIB
1.3.6.1.2.1mib_2AXON-MIB
Numeric OIDNameModule
1.3.6.1.2.1.234natv2MIBNATV2-MIB
1.3.6.1.2.1.234.2natv2MIBInstanceObjectsNATV2-MIB
1.3.6.1.2.1.234.2.1natv2InstanceTableNATV2-MIB
1.3.6.1.2.1.234.2.1.1natv2InstanceEntryNATV2-MIB
1.3.6.1.2.1.234.2.1.1.15natv2InstanceAddressMapFailureDropsNATV2-MIB